- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, LS/RS rear mufflers, and LS/RS tailpipes.
-
This listing covers model years 1957, 1958, 1959, 1960, 1961, and 1962 New Yorker, 300, and Windsor's V8 dual exhaust stock with 2 mufflers and 2 resonators. In 1962 the New Yorker Station Wagons are the only body style given a stock dual exhaust, all other New Yorker body styles were stock with a single exhaust. Excludes 300's with the Ram Induction set-up. Photo depicts the system for a 1960 New Yorker. -
This listing covers model years 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Buick Riviera with V8 and allows you to delete the stock resonators. Photo depicts the system for a 1966 Buick Riviera with the stock V8 (with front connector pipe cut to reduce shipping). MY's 1967-70 Riviera's take different exhaust pipes at 2¼"OD with flat spots but all other parts shown in the photo are correct.- 1966-70 Riviera exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front connector pipes, LS/RS rear connector pipes, LS/RS resonators w/tailpipes.
- 1971-74 Riviera exhaust system consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonators w/tailpipes.
-
This listing covers MY's 1966 and 1967 Ford 7-Liter's stock with the 428ci V8. If you have a 1966 427ci or a 1967 427ci in your Ford 7-Litre (instead of the stock 428ci) we can help you put a 7-Litre system on your Ford. Photo depicts the system for MY 1966 7 Litre with the stock 428ci .- Ford 7-Liter exhaust system consists of the H pipe, LS/RS front glasspacks, and LS/RS rear tailpipes w/glasspacks. Tailpipes include welded hanger attachment brackets and angle-cut turn-downs as shown.
- Pipe diameter of the stock 428ci is 2"OD through out. The 427ci H pipe starts out at 2½" OD but quickly reduces to 2" and remains 2" through out.
- The body diameter of all 4 glasspacks will be 3½" OD if order an aluminized steel system and 3" OD if ordering a T409 stainless steel system.
-
This listing covers model years 1965, 1966, 1967, 1968, and 1969 Chevelle, Malibu and El Camino's V8 dual exhaust stock with 2 mufflers and 2 resonators. Excludes the 396ci High Performance since these system are stock without resonators. For that listing, refer to 588642.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tail pipes with bullet style (only) resonators.
-
Photo is correct to this stock dual exhaust listing.- Stock Dual exhaust system includes LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, dual in/dual out transverse muffler and LS/RS tailpipes.
- Stock pipe diameter is 2¼"OD through out.
-
Photo depicted is for a 1960-61 Chrysler and is posted here since these systems are very similar in configuration (but require different parts).- Ram Induction dual exhaust system consists of LS/RS front exhaust pipes (AKA preheater tubes), LS/RS center exhaust pipes, cross-over (these 5 pipes make up an "H" pipe), LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipe along with the 1&1/8" clamps needed at the preheater tubes.
-
Listing covers model years 1960 and 1961 Dodge's with the Ram Induction set up. Photo depicted is for a 1960-61 Chrysler and is posted here since these systems are very similar in configuration (but require different parts).
- Ram Induction dual exhaust system consists of LS/RS front exhaust pipes (AKA preheater tubes), LS/RS center exhaust pipes, cross-over (these 5 pipes make up an "H" pipe), LS/RS rear exhaust pipes,LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers 1960 and 1961 DeSoto's with the Ram Induction set up. Photo depicted is for a 1960-61 Chrysler and is posted here since these systems are very similar in configuration (but require different parts).
- Ram Induction dual exhaust system consists of LS/RS front exhaust pipes (AKA preheater tubes), LS/RS center exhaust pipes, cross-over (these 5 pipes make up an "H" pipe), LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes along with the 1&1/8" clamps needed at the preheater tubes.
-
Listing covers MY's 1960 and 1961 Chryslers stock with the Ram Induction setup. Photo is correct to the listing.
- Ram Induction dual exhaust system consists of LS/RS front exhaust pipes (AKA preheater tubes), LS/RS center exhaust pipes, cross-over (these 5 pipes make up an "H" pipe), LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes along with the 1&1/8" clamps needed at the preheater tubes.
- The tailpipes are short on the 300; they end in front of the bumper and they are tucked up tightly under the trunk pan. You can’t see the tailpipe tips from the side of the vehicle.
- The tailpipe hangers attach at the radius of the turndown, not on a straight section of pipe. This is a Waldron's exclusive design.
-
This listing covers model years 1957 and 1958 full size Buick's with dual exhaust. Photo depicts the system for a 1958 Buick Roadmaster.- This system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with short tailpipes. This system is a metal-to-metal connection at the manifold and no gaskets are required.
-
This listing covers MY's 1955 and 1956 Packard Patrician, Caribbean, 400, Executive, Clipper Super, & Custom's with the stock V8. Excludes 1955 Packard convertibles which we do not have the needed patterns to reproduce at this time. Photo depicts the dual exhaust system with resonators for a 1956 Packard Patrician Sedan, 400 HT or Caribbean HT & convertible with the stock V8 and torsion suspension.- Dual exhaust consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes with resonators built in.
- Waldron's does not offer a "with cut pipes" option on this dual exhaust.
-
- This dual exhaust consists of the H pipe, LS/RS glasspack design mufflers, and tailpipes w/glasspack design resonators.