- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS muffler with tailpipes.
-
This listing covers MY's 1962, 1963 and 1964 Ford Sunliner, Galaxie, 300 & Custom convertibles. Photo depicts the dual exhaust system for 1964 Ford Full Size Convertibles with the stock 390ci and log style manifolds. -
This listing is for all 1958 Pacers, Rangers, Citations, Corsairs, Round Up, Bermuda, and Villager's with the stock V8 and dual exhaust. Photo depicts the system for 1958 Edsel Corsair & Citation HT's.- Dual exhaust systems for 1958 Pacer &/or Ranger station wagon's consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailspout.
- Dual exhaust system for 1958 Pacer &/or Rangers, except station wagon's, consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators, and LS/RS rear tailpipes.
- Dual exhaust systems for 1958 Corsair &/or Citation consists of LS/RS exhaust pipes, balance tube, LS/RS mufflers, LS/RS front tailpipes with resonators, and LS/RS rear tailpipes.
- These dual exhaust systems are 2" throughout.
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Challenger's with the stock 340ci, 383ci, or 440ci and the stock dual exhaust system with mufflers and resonators. Excludes 426ci engine since that system requires an H pipe. Photo depicts the system for 1970-71 Dodge Challenger's stock with the 440ci and 3-2 bbl carburetor set-up.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, and LS/RS mufflers w/tailspout (only certain set-ups).
- 1970-71 Models vary at the mufflers with some systems (depending on engine and carburetor setup) stock with chrome tips which are NOT part of this system while others have a turndown welded to the end of the mufflers. You will be asked to report which you need in the check out process.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, and 1961 Dodge Coronet, Royal, Custom Royal, D500, Matador, and Polara's with a V8 and stock dual exhaust system. Excludes 1957-59 Dodge convertibles which were stock with 2 mufflers and 2 resonators. Photo depicts the dual exhaust system for 1958 Dodge's (except D500, convertibles, or station wagons) with the stock V8- For MY's 1955-56 this dual exhaust consists of LS exhaust pipe, RS front exhaust pipe, RS rear exhaust pipe, LS/RS mufflers and LS/RS tailpipes. 1956 models were stock with a Y pipe off the RS however we build it as a straight exhaust pipe.
- For MY's 1957-61 this dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
This listing covers model years 1968, 1969, and 1970 Cadillac Calais, Deville, Fleetwood, and Commercial Chassis' with V8 and stock single exhaust. Photos depicts the system for 1968 Calais' and Deville's.- Single exhaust consists of Y pipe, rear exhaust pipe, muffler, connector pipe, resonator and short tailpipe.
-
This listing covers model years 1935, 1936, 1937, 1938, 1939, 1940, and 1941 Ford ½T's with the stock flathead V8. Photo depicts the stock single exhaust for 1940 Ford ½T trucks with the stock 239ci flathead V8.- Single exhaust consists of the crossover pipe, Y pipe, muffler, and tailpipe.
-
This listing covers MY's 1967, 1968, 1969, 1970, 1971, 1972, 1972, 1973, and 1974 Imperials with the stock V8 and a single exhaust. Photo depicts the single exhaust system for 1971-73 Imperials with the stock V8- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, connector pipe (AKA over-axle pipe), and resonator with tailpipe.
-
Waldron's Exhaust reproduces this OE correct muffler hanger. This muffler hanger was used on 1970 and 1971 Ford Torino's / Fairlane's and Mercury Montego's. All engines. Both single and dual exhaust systems. Simply order the amount needed. Hangers generally will ship within 1 wk. -
These OEM correct resonator hangers will fit MY's 1966, 1967, 1968, and 1969 Lincoln Continentals. Hangers generally will ship within 1 wk. -
This listing covers MY's 1954, 1955, and 1956 Dodge ½T's with the stock V8. Photo is correct to the listing.- Single exhaust system consists of cross-over pipe, Y pipe (AKA 2 pc. Y pipe), rear exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1957, 1958, 1959, and 1960 Dodge D100, D200, D300 or W300 stock with the stock 318ci V8. Photo is correct to the listing for all 1957-60 D100, D200, D300 & W300 with the stock 318ci and Y pipe with Option 2 flange rotation.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and OE correct short tailpipe.
- You will be asked to report which of the 2 flange rotation options is needed for your Y pipe.
- Y pipe may be NORS
-
This listing covers model years 1968, 1969, 1970, 1971, and 1972 Chevy K10 & K20's (excludes K30's) with the stock V8. For C Series; refer to listing 453324. Photos depicts the stock single exhaust for 1971-72 Chevy Blazer's with the stock 350ci V8. The single exhaust for the C series truck's consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. The single exhaust for the K series truck's consists of the cross over pipe, Y pipe, muffler, and tailpipe.