Shop

  • This listing covers model years 1932, 1933, and 1934 Ford BB 1½T's. Photo depicts the stock single exhaust for 1934 Ford BB 1½T's with the stock 221ci flathead V8, 131"WB & option 2 on the flange rotation with the tailpipe cut to reduce the cost  of shipping. 
    • Single exhaust system consists of the crossover pipe, exhaust pipe, muffler, and tailpipe. Report the flange rotation in the check out process. 
     
  • This listing covers model years 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Ford F100, F250, and F350 with the stock 6 cyl. Photo depicts the single exhaust system for 1967-68 F100's with the stock 6 cyl. 
    • For all MY's and models (other than 1973-74 F350) this single exhaust consists of the exhaust pipe, muffler, and tailpipe.
    • 1973-74 F350 single exhaust consists of the exhaust pipe, muffler, front tailpipe, and rear tailpipe.
     
  • This listing covers model years 1932, 1933, and 1934 Ford ½T's with the stock flathead V8. Photo depicts the system for 1933-34 Ford ½T's with the stock V8
    • Single exhaust consists of the crossover pipe, Y pipe, muffler, front tailpipe and rear tailpipe.
  • This listing covers model years 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, and 1971 D100, D200 or D300 with the stock 6 cyl engine and 2WD. This listing excludes Dodge trucks with 4WD. Photo depicts the stock single exhaust for 1970-71 Dodge D100's with the stock Slant 6 225ci. 
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, and 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1976, 1974, and 1975 Willys/Jeeps models 2WD Trk, 4WD Trk, FC170, J-262, J-264, J-362, and J-364 Gladiator. Photo depicts the stock single exhaust for 1957-64 Willys Jeep FC170's (forward control) with the stock in-line 6cyl engine. 
    • MY's 1963-65 single exhaust consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
    • All other MY's consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1932, 1933, 1934, 1935, 1936, 1937, and 1938 all Terraplane's with the stock 6 cyl. Photo depicts system for 1934-35 Terraplane with the tailpipe cut (for shipping savings).
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
    • Original cast iron flange is NA. Exhaust pipe will come with universal 2blt flange. If you have the original cast iron flange, keep it and reuse it. 
  • This listing covers model years 1973 and 1974 Ventura's stock with the V8 and dual exhaust. Photo depicts the stock dual exhaust for 1974 Ventura GTO's with the stock V8 and stock split chrome tips. The 1973 Ventura's take the same front and rear exhaust pipes as 1974 models, the difference between the 2 model years comes at the transverse muffler and tailpipes. 
    • Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, dual in/dual out transverse muffler, and LS/RS tailpipes.
    • If the chrome split tips are desired (stock for a 1974 Ventura GTO), you may add them to your cart below.
  • This listing covers model years 1926, 1927, 1928, 1929, 1930, 1931, and 1932 Reo's with the stock 6  or 8 cyl. Photo depicts the system for a 1929 Flying Cloud with the stock 6 cyl. 
    • Single exhaust system consists of the exhaust pipe, muffler, and tailpipe. We provide a universal flange but if you have the original cast iron flange it should be reused.
  • This cat-back listing covers model years 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, and 1992 Firebird's with either a 4, 6, or 8 cyl engine and stock with 2 tailpipes. Photo depicts the cat-back single exhaust system for 1990-92 Firebirds with the stock 189T or 191ci 6cyl. All parts shown are NORS . 
    • For MY's 1983-84 with a 6 cyl & MY's 1983-86 with a 4 cyl; single cat-back system consists of the rear exhaust pipe, single in/dual out same side transverse muffler, and tailpipes.
    • For all 8 cyls & all other MY's for the 6 & 4 cyl; single cat-back system consists of the rear exhaust pipe, single in/dual out opposing sides transverse muffler, and LS/RS tailpipes.
    • Some or all parts may be NORS
  • This listing covers model years 1967, 1968, and 1969 Firebird's with the OHC 6 cyl engine and 4 bbl carburetor. Photo depicts the system for MY 1968 Firebird with the stock 6 cyl. and 4bbl carb. 
    • Single exhaust system consists of the Y pipe, center exhaust pipe, rear exhaust pipe (over-axle), transverse muffler, and tailpipe.
  • This listing covers model years 1967, 1968, and 1969 Firebird's stock with the 6 cyl and 1 bbl carburetor. Photo depicted is correct to the listing.
    • Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1983, 1984, and 1985 Bonneville, Catalina (up to 1981), Parisienne and Grand Prix's with the stock V8 and 1 muffler. Regarding 1982 models; refer to listing 453254 or 453235 for the transverse muffler set up correct to your vehicle. Photo depicts the stock cat-back single exhaust for 1978-79 Pontiac Full Size (except Grand Prix's) with the stock 350R. This customer opted to have the tailpipe cut to reduce the shipping cost. You can see in the photo where it has been joined together. 
    • In these model years the single 1 muffler system is broken down 3 different ways, depending on MY, model name, and engine size. All start behind the converter. Some single cat-back consists of the rear exhaust pipe, muffler, front tailpipe, and rear tailpipe, others consists of the rear exhaust pipe, muffler, and tailpipe, while later years consists of center exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Star Chief, Bonneville, and Catalina's stock with a V8 and single exhaust. This is a stock set up for 1965 Catalina w/ 3 spd STD 2 bbl carb, 1971-73 full size with the 350ci, and 1974 full size models. For all other applications this is a resonator eliminator option. If you system was stock with the resonator and you would like to keep it stock, please refer to 453228.  Photo depicts the stock single exhaust with the resonator eliminated for 1969-70 Catalina's with the stock 400ci or 428ci and automatic transmission. 
    • Single exhaust system consist of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
  • This listing covers model years 1928 & 1929 Oakland's with the stock 6 cyl and  1930 & 1931 Oakland's  with the stock 8 cyl (AAS All American Six, Model 101 and Model 103). Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1978, 1979, and 1980 Lemans and Grand Am's with their stock V8 and 2 tailpipes. Photo depicts the stock single cat-back with dual tailpipes system for 1978-79 Leman's & Grand Am's with the stock 305ci . 
    • Single cat-back consists of the rear exhaust pipe, single in/dual out transverse muffler, and LS/RS tailpipes. If the Y pipe and/or converter are needed please contact us for availability and pricing.
  • This listing covers model years 1978, 1979, 1980, and 1981 Lemans and Grand Am (except 1981) stock with the V8 with single tailpipe exit. Photo depicts the stock cat-back single exhaust for 1978-79 Pontiac Leman's & Grand Am's with the stock 301ci. 
    • Single cat-back exhaust system consists of the rear exhaust pipe, single in/single out transverse muffler, and single tailpipe. If Y pipe and/or the converter are needed please contact us for pricing and availability.
     
  • This listing covers model years 1966, 1967, 1968, and 1969 Lemans and Tempest with the stock OHC 6 cyl and 4 bbl carburetor. For MY's 1966-67 this is a resonator delete system. If you would like the stock system with the resonator refer to SKU 453200. Photo depicts the system for MY's 1966-67 with the resonator eliminated.
    • Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Tempest (up through 1970), GTO, and Lemans' with the stock 6 cyl. Photo depicts the single exhaust for 1970-72 Tempest & Lemans with the stock 6 cyl. 
    • Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
  • Photo depicts the stock dual exhaust for all 1958 Pontiac Full Size with the stock V8 and 122"WB. 
    • This dual exhaust system consists of LS/RS exhaust pipes, LS/RS front mufflers, LS/RS front connector pipes, LS/RS rear connector pipes, LS/RS rear mufflers, and LS/RS tailpipes.
    • In order to build the correct front connector pipes, you will be asked to report the wheel base of your 1958 Pontiac.
     
  • This listing covers model years 1970, 1971, 1972, 1973, and 1974 Duster's and Valiant's with the stock 340ci or 360ci V8 and dual exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
  • This listing is a stock set up for 1975 and 1976 Gran Fury's with the stock 400ci or 460ci that were stock from the factory without catalytic converters. For 1975 and 1976 Road Runner's or Fury's (stock without catalytic converter but stock with 4 mufflers) this is a resonator eliminator option. For the stock set refer to listing 438529. Photo depicts the stock dual exhaust for 1975 Plymouth Fury or Roadrunner's with the stock 400ci with stock resonators eliminated. 
    • This dual exhaust consists of the LS front exhaust pipe, LS rear exhaust pipe, RS exhaust pipe, LS/RS mufflers, LS/RS connector pipes and LS/RS resonator eliminator pipes.
  • This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, and 1961 Cambridge, Plaza, Savoy, Cranbrook, Belvedere, and Fury's with the stock V8 and single exhaust. Excludes 1959 convertibles which were stock with a muffler and a resonator.  Photo depicts the system for a 1955 Plymouth Belvedere. Y pipe vary by transmission type and convertible take different muffler and tailpipe. 
    • Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
  • This listing covers model years 1953, 1954, 1955, 1956, 1957, 1958, and 1959 Cambridge, Plaza, Cranbrook, Savoy, Belvedere, and Fury's with the stock 6 cyl engine. Photo depicts a 1956-57 Plymouth (all models) 6 cyl system.
    • For MY's 1953-56 this single exhaust consists of the exhaust pipe, muffler, and tailpipe.
    • For MY's 1957-59 this single exhaust consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1928, 1929, 1930, 1931, and 1932 Plymouth's with the stock 4 cyl engine. Photo depicts system for a 1931 Plymouth PB.
    • Single exhaust system consists of the exhaust pipe, muffler, and tailpipe. The exhaust pipe will not come with a flange. When possible, reuse the original cast iron flange.
  • This listing covers model years 1932 models 905, 906 Twin Six and 1937 models 1506, 1507, 1508, along with 1938 & 1939 Packard's stock with the V12. Photo depicts the system for 1937-39 Packard's with the stock V12.
    • This single exhaust system starts at the exhaust pipe outlet and consists of the muffler, connector pipe, resonator and tailpipe. The original exhaust pipe is porcelain coated with a heat shield.  You will need to make the connection from the manifold to the muffler inlet.
     
  • This listing covers model years 1978, 1979, 1980, 1981, 1982, 1983, 1984, and 1985 Toronado's with gas V8's and stock single exhaust. Excludes diesel engines.  Photo depicts the stock V8 Cat-back single exhaust system for 1978 Toronado's 
    • Single cat-back system consists of a rear exhaust pipe, muffler, connector pipe, and resonator with tailpipe. If the converter and/or pipes forward of cat are needed please contact us for pricing and availability.
  • This listing is for 1975 and 1976 Delta 88 and 98's stock with a 400ci or 455ci and stock single exhaust. Photo depicts the stock cat-back single exhaust system for 1975-76 Oldsmobile Delta 88's with the stock 455ci V8. 
    • Single exhaust system connects to the rear of the converter and consists of the rear exhaust pipe, front muffler, connector pipe, and resonator with tailpipe. If the converter and/or pipes forward of cat are needed please contact us for pricing and availability.
  • This listing is for 1971, 1972, 1973, and 1974 Toronado's. Photo depicts the stock dual exhaust for 1973-74 Olds Toronado's with the stock V8.
    • Dual exhaust system consists of LS front and rear exhaust pipe, RS exhaust pipe, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailpipe.
     
  • This listing is for 1975, 1976, and 1977 Cutlass' with the stock 6 cyl or V8 and begins behind the catalytic converter. Photo depicts all but the catalytic converter for a 1976 Olds Cutlass 2 dr. with the stock 350ci w/4bbl carb. 
    • Single cat-back exhaust consists of the rear exhaust pipe, muffler, and tailpipe.
    • If the converter and/or pipes forward of the converter are needed, please contact us for pricing and availability.
  • This listing covers model years 1967, 1968, 1969, 1970, and 1971 F-85 and Cutlass' with a stock 6 cyl 250ci and single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • For MY 1967 this single exhaust consists of the exhaust pipe, muffler, front tailpipe, and rear tailpipe.
    • For MY's 1968-71 this single exhaust consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1964, 1965, 1966, and 1967 Olds Cutlass & F85 stock with a V8 and single exhaust with muffler and resonator. Photo depicts the stock single exhaust for 1965-67 Olds F85's (except Vista Cruiser) with the stock 330ci V8 & 4bbl carburetor 
    • Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear single in/single out transverse muffler, and tailpipe.
     
    • This turbo single exhaust is unique and consists of the front exhaust pipe (AKA crossover pipe), center exhaust pipe (AKA turbo outlet pipe), rear exhaust pipe, resonator, over-axle pipe, single in/dual out transverse muffler, and LS/RS tailpipes.
    • Waldron's Exhaust also has the turbo inlet pipe available for $60.00 or in T409 SS for $99.00. Simply add it to your cart, if needed.
     
  • This listing covers model years 1961, 1962, and 1963 F85 and Cutlass's with the stock 215ci and single exhaust. Photo depicts the stock single exhaust for 1963 F85 with the stock 215ci V8.
    • This system is a metal-to-metal connection at the manifold and no gaskets are required there. However, some of these Y pipes do require a gasket at the outlet end and unfortunately Waldron's does not have these gaskets available.
    • Single exhaust system consists of the Y pipe (flange connection to), rear exhaust pipe, single in/single out same end transverse muffler, and tailpipe. Y pipe may be NORS.
    • Original flanges were a formed flange which are NA. If the Y pipe for your system is not an NORS part, Waldron’s Exhaust will use universal flat flanges in reproducing the Y pipe. If you have the original flanges and would like us to reuse them on your system, you are welcome to ship them to us in advance of building your system. 
    MY 1962 is unique & we will need to know what barrel carburetor was stock and whether your 1962 is a 1st, 2nd, or 3rd design. You will need to report your set-up to us in the check out process. If you are unsure which design you have, this information should help you make a determination:
    1. 1st Design: The propeller shaft center bearing support is mounted to the floor pan.
    2. 2nd Design: The propeller shaft center bearing support is mounted to the cross member. Rear exhaust pipe will have a flat area 34" from the outlet end.
    3. 3rd Design: The propeller shaft center bearing support is mounted to the cross member. Rear exhaust pipe is round through out (no flattened area).
  • This listing cover model years 1916,1917, 1918, 1919, 1920, 1921, 1922, 1923, 1924, and 1925 Maxwell's with the stock 4 cyl. Photo depicted is correct to the listing. 
    • Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1955, 1956, and 1957 Capri and Premiere's stock with a V8 and dual exhaust. Photos depicts the stock dual exhaust for 1957 Lincoln Capri's and Premiers with the stock V8
    • For MY 1955 the stock dual exhaust consists of the LS front and rear exhaust pipe, RS exhaust pipe, LS/RS front mufflers, LS/RS connector pipes, LS/RS rear mufflers, & LS/RS tailpipes.
    • For MY's 1956-57 the system consists of LS/RS exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, LS/RS mufflers & LS/RS tailpipes. 1956 tailpipes are built to go into the bumper. 1957 tailpipes built with turndowns.
     
  • This listing covers MY's 1953 and 1954 Lincolns with the stock V8. Photo depicts the system for 1954 Lincolns with the stock V8
    • This single exhaust system consists of the crossover pipe, exhaust pipe, front muffler, center muffler, connector pipe, rear muffler and tailpipe.
     

Title

Go to Top