- Single cat-back exhaust system consists of the rear exhaust pipe, single in/single out transverse muffler, and single tailpipe. If Y pipe and/or the converter are needed please contact us for pricing and availability.
-
This listing covers model years 1978, 1979, 1980, and 1981 Lemans and Grand Am (except 1981) stock with the V8 with single tailpipe exit. Photo depicts the stock cat-back single exhaust for 1978-79 Pontiac Leman's & Grand Am's with the stock 301ci. -
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Tempest (up through 1970), GTO, and Lemans' with the stock 6 cyl. Photo depicts the single exhaust for 1970-72 Tempest & Lemans with the stock 6 cyl.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
Photo depicts the stock dual exhaust for all 1958 Pontiac Full Size with the stock V8 and 122"WB.- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS front mufflers, LS/RS front connector pipes, LS/RS rear connector pipes, LS/RS rear mufflers, and LS/RS tailpipes.
- In order to build the correct front connector pipes, you will be asked to report the wheel base of your 1958 Pontiac.
-
This listing covers model years 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, and 1942 Pontiac Models 401, 402, 601, 603, 605, 701 Standard and Deluxe, 36-32BA Deluxe, 36-26BB Master, 26-28BA DeLuxe 37-26CA DeLuxe, 37-28CA DeLuxe, 6-DA, 8-DA, Torpedo, and Streamliner's with the stock 6 or 8 cyl engines. Photo depicts the system for a 1930 (only) Pontiac with the stock 6 cyl.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing is a stock set up for 1975 and 1976 Gran Fury's with the stock 400ci or 460ci that were stock from the factory without catalytic converters. For 1975 and 1976 Road Runner's or Fury's (stock without catalytic converter but stock with 4 mufflers) this is a resonator eliminator option. For the stock set refer to listing 438529. Photo depicts the stock dual exhaust for 1975 Plymouth Fury or Roadrunner's with the stock 400ci with stock resonators eliminated.- This dual exhaust consists of the LS front exhaust pipe, LS rear exhaust pipe, RS exhaust pipe, LS/RS mufflers, LS/RS connector pipes and LS/RS resonator eliminator pipes.
-
This listing covers model years 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, and 1976 Plaza, Savoy, Belvedere, Satellite, and Fury's stock with the 6 cyl. For MY's 1975 & 76 this listing is for those models stock without a catalytic converter. Photo depicts the stock single exhaust for all 1966 Plymouth full size Station Wagons with the stock 225ci.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, and 1961 Cambridge, Plaza, Savoy, Cranbrook, Belvedere, and Fury's with the stock V8 and single exhaust. Excludes 1959 convertibles which were stock with a muffler and a resonator. Photo depicts the system for a 1955 Plymouth Belvedere. Y pipe vary by transmission type and convertible take different muffler and tailpipe.- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1953, 1954, 1955, 1956, 1957, 1958, and 1959 Cambridge, Plaza, Cranbrook, Savoy, Belvedere, and Fury's with the stock 6 cyl engine. Photo depicts a 1956-57 Plymouth (all models) 6 cyl system.- For MY's 1953-56 this single exhaust consists of the exhaust pipe, muffler, and tailpipe.
- For MY's 1957-59 this single exhaust consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1928, 1929, 1930, 1931, and 1932 Plymouth's with the stock 4 cyl engine. Photo depicts system for a 1931 Plymouth PB.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe. The exhaust pipe will not come with a flange. When possible, reuse the original cast iron flange.
-
This listing covers model years 1978, 1979, 1980, 1981, 1982, 1983, 1984, and 1985 Toronado's with gas V8's and stock single exhaust. Excludes diesel engines. Photo depicts the stock V8 Cat-back single exhaust system for 1978 Toronado's- Single cat-back system consists of a rear exhaust pipe, muffler, connector pipe, and resonator with tailpipe. If the converter and/or pipes forward of cat are needed please contact us for pricing and availability.
-
This listing covers model years 1975, 1976, 1977, 1978, 1979 Delta 88 and Royale's with a 6 cyl or a V8. Excludes models with a 455ci, diesel or a station wagon. Photo depicts the stock cat-back single exhaust for 1975 Delta 88's with the stock 350ci.- Single cat-back system consists of the rear exhaust pipe, muffler, and tailpipe. If the converter and/or pipes forward of cat are needed please contact us for pricing and availability.
-
This listing is for 1975 and 1976 Delta 88 and 98's stock with a 400ci or 455ci and stock single exhaust. Photo depicts the stock cat-back single exhaust system for 1975-76 Oldsmobile Delta 88's with the stock 455ci V8.- Single exhaust system connects to the rear of the converter and consists of the rear exhaust pipe, front muffler, connector pipe, and resonator with tailpipe. If the converter and/or pipes forward of cat are needed please contact us for pricing and availability.
-
This listing is for 1971, 1972, 1973, and 1974 Toronado's. Photo depicts the stock dual exhaust for 1973-74 Olds Toronado's with the stock V8.- Dual exhaust system consists of LS front and rear exhaust pipe, RS exhaust pipe, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailpipe.
-
This listing is for 1975, 1976, and 1977 Cutlass' with the stock 6 cyl or V8 and begins behind the catalytic converter. Photo depicts all but the catalytic converter for a 1976 Olds Cutlass 2 dr. with the stock 350ci w/4bbl carb.- Single cat-back exhaust consists of the rear exhaust pipe, muffler, and tailpipe.
- If the converter and/or pipes forward of the converter are needed, please contact us for pricing and availability.
-
This listing covers model years 1967, 1968, 1969, 1970, and 1971 F-85 and Cutlass' with a stock 6 cyl 250ci and single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- For MY 1967 this single exhaust consists of the exhaust pipe, muffler, front tailpipe, and rear tailpipe.
- For MY's 1968-71 this single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1964, 1965, 1966, and 1967 Olds Cutlass & F85 stock with a V8 and single exhaust with muffler and resonator. Photo depicts the stock single exhaust for 1965-67 Olds F85's (except Vista Cruiser) with the stock 330ci V8 & 4bbl carburetor- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear single in/single out transverse muffler, and tailpipe.
-
- This turbo single exhaust is unique and consists of the front exhaust pipe (AKA crossover pipe), center exhaust pipe (AKA turbo outlet pipe), rear exhaust pipe, resonator, over-axle pipe, single in/dual out transverse muffler, and LS/RS tailpipes.
- Waldron's Exhaust also has the turbo inlet pipe available for $60.00 or in T409 SS for $99.00. Simply add it to your cart, if needed.
-
This listing covers model years 1961, 1962, and 1963 F85 and Cutlass's with the stock 215ci and single exhaust. Photo depicts the stock single exhaust for 1963 F85 with the stock 215ci V8.- This system is a metal-to-metal connection at the manifold and no gaskets are required there. However, some of these Y pipes do require a gasket at the outlet end and unfortunately Waldron's does not have these gaskets available.
- Single exhaust system consists of the Y pipe (flange connection to), rear exhaust pipe, single in/single out same end transverse muffler, and tailpipe. Y pipe may be NORS.
- Original flanges were a formed flange which are NA. If the Y pipe for your system is not an NORS part, Waldron’s Exhaust will use universal flat flanges in reproducing the Y pipe. If you have the original flanges and would like us to reuse them on your system, you are welcome to ship them to us in advance of building your system.
- 1st Design: The propeller shaft center bearing support is mounted to the floor pan.
- 2nd Design: The propeller shaft center bearing support is mounted to the cross member. Rear exhaust pipe will have a flat area 34" from the outlet end.
- 3rd Design: The propeller shaft center bearing support is mounted to the cross member. Rear exhaust pipe is round through out (no flattened area).
-
This listing cover model years 1916,1917, 1918, 1919, 1920, 1921, 1922, 1923, 1924, and 1925 Maxwell's with the stock 4 cyl. Photo depicted is correct to the listing.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1955, 1956, and 1957 Capri and Premiere's stock with a V8 and dual exhaust. Photos depicts the stock dual exhaust for 1957 Lincoln Capri's and Premiers with the stock V8- For MY 1955 the stock dual exhaust consists of the LS front and rear exhaust pipe, RS exhaust pipe, LS/RS front mufflers, LS/RS connector pipes, LS/RS rear mufflers, & LS/RS tailpipes.
- For MY's 1956-57 the system consists of LS/RS exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, LS/RS mufflers & LS/RS tailpipes. 1956 tailpipes are built to go into the bumper. 1957 tailpipes built with turndowns.
-
This listing covers MY's 1953 and 1954 Lincolns with the stock V8. Photo depicts the system for 1954 Lincolns with the stock V8- This single exhaust system consists of the crossover pipe, exhaust pipe, front resonator, center muffler, connector pipe, rear resonator and tailpipe.
-
This listing covers model years 1929, 1930, 1931, 192, 1933, 1934, 1935, 1936, 1937, 1940, and 1941 Grahams. Excludes 1938-38 Standard 6 since we do not have the needed patterns for this system. For 1938-39 Supercharged 6, see listing 518778 for a Supercharged 6 system. Photo depicts the system for a 1930 Graham Paige.- Single exhaust system consists of front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1927, 1928, 1930, 1931, 1932, and 1933 Franklin's with the stock 6 cyl. engine. Photo depicts the stock single exhaust for 1927-28 Franklin Series 11B & 11C with the stock 6cyl.- This single exhaust consists of the exhaust pipe, muffler and tailpipe.
- For 1924-26 & 1929 Franklin's, refer to listing 453480.
- For 1933 Olympics', models 18 or 18B, refer to listing 453478.
-
This listing covers model years 1975, 1976, 1977, 1978, 1979, 1980, 1981, and 1982 LTD's with the stock V8. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single cat-back consists of the Y pipe, muffler and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1975, 1976, 1977, and 1978 Torino, Elite, and Ranchero's with the stock V8 and single exhaust. Photo depicts the stock single exhaust for 1975-76 Ranchero's and Station Wagon's with the stock 351ci or 400ci V8 with 1 converter on the driver side.- Single exhaust consists of the Y pipe, muffler, and tailpipe. Y pipe may be NORS. Report catalytic converter set-up in the check out process.
-
This listing covers model years 1962, 1963, 1964, 1965 and 1964 Fairlane's stock with a 6 cyl and single exhaust. Photo depicts the system for MY's 1963-65 Fairlane's with the stock 6 cyl.- 1962-65 models consist of the front exhaust pipe, rear exhaust pipe, and muffler w/tailpipe.
- 1966 models consist of the front exhaust pipe, rear exhaust pipe, and transverse muffler w/tailpipe.
-
This listing covers 1975 & 1976 Mustang's stock with a V6 171ci or a V8 302ci and were stock with catalytic converters.- The V6 171ci dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. H pipe will be NORS.
- The V8 302 dual exhaust consists of the LS front exhaust pipe (AKA extension pipe), H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. H pipe will be NORS.
- This set up does not eliminate the converters and they must be in place. Waldron's Exhaust cannot help with replacement converters.
-
Photos depicts the stock cat-back single exhaust for 1976 Mustang II's with the stock 302ci V8.- Single cat-back exhaust consists of the Y pipe, front muffler, over-axle pipe, rear muffler, and tailpipe.
- Y pipe may be NORS
- The LS/RS catalytic converter-pipe assembly's are not available .
-
Photo depicts the cat-back single exhaust for 1977-78 Mustang's with the stock 4cyl. and a 7¼" converter (shell length).- Single exhaust system starts behind the catalytic converter and consists of the center exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
- You will be asked to report the shell length of the stock catalytic converter in the check out process.
-
This listing is for 1974 and 1975 Mustangs stock with the 4cyl 2300 & stock without a converter. Photo depicts the stock single exhaust system for 1974 Mustang with the stock 4cyl. 1975 models systems are almost identical but require a different rear exhaust pipe.- Single exhaust consists of the front exhaust pipe, rear exhaust pipe, front muffler, over-axle pipe, rear muffler and tailpipe.
-
This listing covers model years 1968, 1969, 170, 1972, and 1973 Mustang's with the stock V8 and single exhaust. For MY 1973 with a 351ci, this listing is a resonator eliminator option. Photo depicts the system for a 1969 Mustang stock with a 351ci V8 & 1970 Mustangs with the stock 351W.- Single exhaust consists of Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
For MY 1967 Mustang with the 6 cyl this is a resonator eliminator option. For MY's 1968, 1969, 1970, 1971, 1972, and 1973 Mustang's with the 6 cyl this is the stock set up.
- Single exhaust consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers 1975 Thunderbird's that were stock without catalytic converters, 1975 T-birds with the converter on the LS manifold, and 1976 T-birds with 2 converters. Photo depicts the stock single exhaust for 1975 Ford Thunderbirds stock without a catalytic converter and the stock V8 (with NORS Y pipe).- Single exhaust consists of the Y pipe, front muffler, over-axle pipe, and rear muffler with tailpipe. Y pipe may be NORS.
- 1975 models are stock with either a catalytic converter off the driver side manifold or without a converter. 1976 models were stock with converters off both manifolds. You will be required to report your stock set-up when ordering.
-
This listing covers model years 1972, 1973, and 1974 Thunderbird's stock with a V8 and single exhaust. Photo depicts the stock single exhaust for 1972 Ford Thunderbirds stock with a 429ci or 460ci V8.- Single exhaust consists of the Y pipe, front muffler, over-axle pipe, and rear muffler with tailpipe. Y pipe may be NORS.
- 1973 model year will need to report build date; before or after 2-15-73
-
This listing covers model years 1960 and 1961 Fairlane's (for 1962 & up refer to Ford Mid Size), 1960, 1962, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Galaxie, Starliner, and Custom's with a stock 6 cyl. Photo depicts the stock single exhaust for 1968 Full Size Ford's with the stock 240ci 6 cyl, except SW's.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1957, 1958, and 1959 Ford's stock with a 6 cyl. Photos depicts the system for a 1957 Ford sedan with the stock 6 cyl. Tail pipe is built in 2 pcs. due to it exceeding a 10' pc. of tubing.- Single exhaust consists of exhaust pipe, muffler, front and rear tailpipe (1 pc. from factory/see above).
