- This single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1936, 1937,1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, and 1949 Nash Ambassador's with an OHV 6 engine. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. -
This listing covers model years 1957, 1958, 1959, 1960 Rambler American, 1961, 1962, 1963, 1964 Rambler, American & Classic, 1965 & 1966 American, Classic along with Nash Marlin & Ambassador stock with the OHV 6 cyl. Photo depicts the stock single exhaust for 1964 AMC American's stock with the OHV 6cyl 196ci (except convertibles & station wagons).- For MY's 1957-63 (exc. 1962-63 convertibles) this single exhaust system consists of the exhaust pipe, muffler, and tailpipe. 1962-63 convertibles take a front exhaust pipe, rear exhaust pipe, muffler, and tail pipe.
- For MY's 1964-66 these single exhaust systems vary between models and body styles, with some set-ups having a transverse muffler.
- MY's 1957-60 all body styles except station wagon's need to report whether the car was stock with or without a wheel carrier.
-
This listing covers model years 1928, 1929 and 1931 Auburn's, excluding Beverly's. Photo depicts the system for MY's 1931-34 Auburns.- System consists of exhaust pipe, muffler and tailpipe. Flange will be laser cut steel, not a cast iron flange.
-
This listing covers model years 1928, 1929, 1930, 1931, and 1932 Auburn's with 8 cyl single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. The flange will be laser cut steel and not cast iron.
-
This listing covers model years 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Buick's with a straight 8. This listing is for MY's 1941-46 Buick's stock with a single carburetor set up. If your 1941-46 Buick was stock with a dual carburetor set-up refer to listing 568792. Photo depicts the system for a 1938 Buick 40 Series Special.- For MY's 1936-39 this single exhaust system consists of exhaust pipe, muffler, and tailpipe.
- For MY's 1940-48 this single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1975, 1976, 1977, 1978, and 1979 Buick's LeSabre and Electra with 231ci, 301ci, 305ci, or 350ci engines and stock single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- This cat-back system consists of the rear exhaust pipe, muffler and tailpipe. If the Y pipe and/or the catalytic converter are needed, please give us a call for pricing and availability.
-
This listing covers model years 1980, 1981, 1982, 1983, 1984, and 1985 LeSabre and Electra's with a V6 or a V8 1 muffler single exhaust system. Listing does not cover diesel engines or CA models. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Single cat-back exhaust system consists of rear exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, and 1989 Buick LeSabre, Electra and Riviera's. Listing does not cover models with diesel engines. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Cat-back system consists of the center exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler, front tailpipe and rear tailpipe.
-
This listing covers model years 1927, 1928, 1929, 1930,1931, 1932 and 1933 LaSalle's with the stock 8 cyl.- For MY's 1927-31 this single exhaust system consists of exhaust pipe (w/3 bolt flange), muffler, and tailpipe. You will be asked to report how your manifold exits in the check out process.
- For MY's 1932-33 this single exhaust system consists of a front exhaust pipe, rear exhaust pipe, muffler, and tailpipe. Trimming may be required to fit exhaust pipe to the manifold. OE system was flanged connected between front and rear exhaust pipes but our system will be a "slip-fit" design. Waldron's does not offer a gasket for this system.
-
This listing covers model years 1934, 1935, 1936, 1937, 1938, 1939, and 1940 LaSalle's. For MY 1936 this is a resonator eliminator option as all 1936 LaSalle's were stock with 2 mufflers. For the OE correct system for 1936 refer to 578829. Photos depict the system for MY's 1937 & 1938 LaSalle- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- 1934-36 MY's will have the 2 bolt flange welded in place and you will need to report the wheel base at check out.
- 1937-40 MY's originally had a 4 bolt cast iron flange which we do not offer. Reuse your original, if possible. If you no longer have the original cast iron flange, Waldron's offer's a non-cast iron 4blt flange. Simply add it to your cart below.
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936,1937, 1938, 1939, 1940, 1941, 1942, 1946, 1947, and 1948 Chevrolet's with the stock 6 cyl. Photos depicts the system for a 1939 Chevrolet Master 4 dr.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- The last 15" of the tailpipe on 1946-48 models will be flatten to an oval shape.
-
This listing covers model years 1965, 1966, 1968, and 1969 Corvair's with stock dual exhaust. 1967 models were stock with a single exhaust (only). Photo depicts the stock dual exhaust system for these MY Corvair's with the stock 140ci 6cyl. engine.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailspouts. The exhaust pipes will be NORS due to the unique formed flange (which has never been reproduced). If you have the original flanges, you are welcome to send them to us and we will re-use them on the replacement exhaust pipes in whichever material desired.