- This listing is for the original stock design with the early model motor mount and consists of LS/RS crossover pipes, LS/RS Y pipes, LS/RS mufflers and LS/RS tailpipes.
- It has been brought to our attention that vehicles using the late model motor mounts will have fitment issues with the cross-over pipes and we suggest that you order the alternative design or be prepared to make modifications.
-
Photo is correct to the listing. If you aren't concerned about staying true to the stock system and would like to eliminate the cross-over pipe & Y pipes or if you have late model motor mounts; refer to 588605. -
This listing covers model years 1955 and 1956 Bel Air's 265ci V8 and stock dual exhaust. This listing excludes 1955-56 Chevy Station Wagon's & Sedan Delivery's which are stock with a single exhaust only. Refer to 588604 for the stock single exhaust. Photo depicts the stock dual exhaust system for a 1955 Bel Air with the stock 265ci V8.- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1949,1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Chevrolet Bel Air, Impala, Biscayne, Delray and Nomads with 6 cyl. Photos depicts the system for MY's 1953-54 Chevy's with the stock 6 cyl.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- For MY's 1965-68; you will need to report the desired tailpipe exit in the check out process.
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Cadillac's. The cross-over portion of this system is part of the manifold. Photo depicts the system for a 1941 Fleetwood.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- If you do not have the original cast iron 4 bolt flange, you may add a non-cast iron 4blt flange to the order.
-
This listing covers model years 1956, 1957, and 1958 Century, Special and Super's. Photo depicts the system for a 1956 Buick Special Model 41 (with the tailpipe cut)- Single exhaust system consists of Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1967, 1968, and 1969 AMC American/Rambler's with a straight 6 cyl. Photo depicts the stock single exhaust for 1967-68 AMC Rambler American's HT's & Sedan's with the 199ci 6cyl. Convertibles & SW require a different system, as does the 232ci 6cyl.- The single exhaust system consists of front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 for Rebel, Ambassador, Classic, Marlin, American, Gremlin, Hornet, Javelin and AMX's with V8 and single exhaust. Photo depicts the system for a 1965 AMC Rambler Ambassador with the stock 327ci.- For MY's 1959-62 this single exhaust system consists of 2 pc. Y (cross-over & Y pipe), muffler and tailpipe.
- For MY's 1963-64 3 Seat Station Wagons this single exhaust system consists of 2 pc. Y (cross-over & Y pipe), rear exhaust pipe, muffler and tailpipe.
- For MY's 1963-74 (except the 3 Seat SW) this single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- Some Y pipes may be NORS.
-
This listing covers model years 1976, 1977, 1978, 1979, & 1980 CJ5's and CJ7's stock from the factory with a converter. Photo depicts the stock single exhaust, including the catalytic converter, for 1977-78 CJ5's with the stock 258ci. (1976 takes a different tailpipe).- The single exhaust system consist of the exhaust pipe, muffler, & tailpipe.
- If the converter is needed, you may add it to the order for an additional $335.00.
-
Photo is correct to this stock dual exhaust listing.- Stock Dual exhaust system includes LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, dual in/dual out transverse muffler and LS/RS tailpipes.
- Stock pipe diameter is 2¼"OD through out.
-
This listing covers MY's 1932, 1933, 1934 & 1935 Lincoln K Series stock with the V12. Photo depicts the stock single exhaust for 1932-33 Lincoln K Series with the stock V12- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Original exhaust pipe was 2¾"OD. In reproduction it will be 2"OD flared to 2¾"OD with a flat flare. We do not have the needed gasket available or the proper flange for this connection. If you have the original cast iron flange, you will want to reuse it.
-
This listing covers MY's 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973 and 1974 Mercury Monterey, Montclair, Parklane, Commuter, Colony Park, Station Wagon, Marquis and Marauder's with the stock 390ci, 410ci, 428ci ,429ci, 351ci, 400ci & 460ci V8 and single exhaust. Photo depicts the single exhaust for a 1972 Mercury full size with the stock 429ci or 460ci V8- Single exhaust consists of the Y pipe, muffler and tail pipe. Some systems (depending on engine and/or body style) will have a front and rear tail pipe. MY 1967 with a 410ci or 428ci & MY 1973 with a 429ci or 460ci were stock with a resonator. If you would like to include the resonator, please give us a call at 800-503-9428.
-
This listing is for 1975 CJ-5's and CJ-6's with the stock V8 without a converter (not for CJ's that were stock with converter). Photo depicts the single exhaust system offered stock without a catalytic converter for 1975 CJ5's with the stock V8 304ci.- This system consist of the Y pipe, rear exhaust pipe, muffler, and tail pipe.
