- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailspout. Y pipe may be NORS.
- Comet's with the 4bbl carburetor were stock from the factory with a resonator built into the tailpipe. Waldron's does not have the needed pattern for the 4bbl set-up, so this listing is a resonator delete system.
-
This listing covers MY's 1962, 1963 Mercury Meteor's & 1963, 1964, & 1965 Comet (including Cyclone and Caliente's) with their respective stock V8; 221ci, 260ci, or 289ci. 1965 . Photo depicts the system for 1965 Comet's. -
This listing covers MY's 1965, 1966, 1967, 1968, 1969, and 1970 Mercury Monterey's, Commuter's, Colony Park's, & Montclair with their respective stock V8, 390ci, 427ci, 410ci, and 428ci. Excludes Station Wagons which are available with a single exhaust only. The 429ci is not listed due to lack of pattern on the H pipe. Aftermarket companies didn't reproduce. We can help you with mufflers and tailpipes, contact us for pricing. Photo depicts the system for 1968 Marquis', Monterey's, Montclair's, and Parklane's with the stock 428ci.- MY's 1965-68: System consists of the H pipe, LS/RS mufflers, and LS/RS tailpipes.
- MY 1965 Station Wagon: System consists of the H pipe, LS/RS mufflers, LS front, center & rear exhaust pipes, and RS front & rear (that connects to the LS) tailpipes.
- MY 1969: System consists of the H pipe, LS/RS mufflers, LS/RS front and rear tailpipes.
- H pipe may be NORS
-
Photo is correct to the listing.- 1962 & 1963 Olds Jetfire Turbo 2nd Design single exhaust system consists of the front exhaust pipe (AKA cross-over pipe), center exhaust pipe (AKA turbo outlet pipe), rear exhaust pipe, connector pipe (AKA over-axle pipe), single in/dual out transverse muffler, and LS/RS tailpipes.
- Waldron's Exhaust also has the turbo inlet pipe available for $60.00 or in T409 SS for $99.00. Simply add it to your cart, if needed.
-
This listing covers MY's 1960, 1961, 1962, 1963, 1964, 1965, and 1966 GMC ½T 1000, ¾T 1500, and 1T 2500's with the stock V6 305ci with 2WD. Excludes 4WD's. Photo depicts the stock single exhaust for 1963 GMC with the stock 305ci V6 & 2WD (except 7' panel truck & Suburban which require a different tailpipe).- Single exhaust system consists of cross-over pipe, Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, and 1959 GMC 1½T's with the stock 6 cyl. Photo depicts the single exhaust system for 1955-58 GMC truck models 100-24, 150-24, 250-24 & PM250-24 with the stock 6 cyl- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Flange is not included with this exhaust pipe. Reuse original cast iron flange (if possible).
-
This listing covers model years 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 GMC's with the stock 6 cyl 228ci or 248ci.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- This exhaust pipe will not come with the cast iron flange. You will need to reuse your flange. Nor do we have a gasket available.
- The OE muffler hanger, available in checkout, is for MY's 1941-53. It is not OE correct for MY's 1939-40. Currently NA
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, and 1949 Chevy trucks stock with the 6 cyl and single exhaust. The photo is correct to the listing.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- Please specify the vehicle series through the checkout process.
-
Listing covers MY's 1935, 1936, 1937, 1938, 1939, 1940, and 1941 Ford ½T Trucks with the stock flathead V8. Convert your flathead Ford to dual exhaust with Waldron's exclusive Dual Conversion kits! Complete kit bolts on to the stock manifolds. Not available for 1933-34, 1942-47 or 1953 MY's.- Dual conversion kit consists of the exhaust pipes, custom-built glasspacks, tailpipes, blocker plate, gaskets and clamps. Gaskets & steel clamps are included. After 1949, the RS exhaust requires blocking plate which will be included in the system. Universal hangers can be added to the cart, if needed. Period specific hangers are N/A.
- The system goes through existing holes in the crossmembers. LH exhaust pipe starts at 1 ½”OD and opens to 2”OD at the glasspack inlet. RH exhaust pipe 2” OD throughout. Tailpipes are either 1 5/8” or 1 ¾” depending on the material selected & MY.
- If you would prefer mufflers (over glasspacks), you may make that change to your order in the check out process. Additional cost of $115.00 for aluminized steel or $230.00 for T409 SS.
-
This listing covers model years 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, and 1939 Willys models 98B, 97, 98D, 8-80D, 90, 77, 37, and 38 with the stock 4 cyl or the stock 6 cyl. Photo depicts the stock single exhaust for 1930 Willys 98B.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1925, 1926, 1927, 1928, 1929, 1930, and 1931 Whippet's 93, 96, 93A, 98, 96A, and 98A's with the stock 4 cyl or the stock 6 cyl engine. Photo depicts the system for a 1930 Whippet 96A.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe. During the check out process you will need to report the ID of the manifold.
-
This listing covers model years 1975, 1976, 1977, 1978, 1979, 1980, and 1981 Firebird, Formula, and Trans Am's with the stock V8, transverse muffler, and 2 tailpipes. Photo depicts the cat- back system for a 1980 Firebird.- Single cat-back system consists of the rear exhaust pipe, muffler, and LS/RS tailpipes.
- If Y pipe and/or converter are needed please contact us for availability and pricing.
- If your Formula or Trans Am was stock with the split chrome tips, you may add them to your cart during the check out process.
- MY's 1975-76; We will need to know what tailpipes are needed: 1) without chrome tips 2) with single chrome outlet 3) with dual chrome outlet
- MY 1977 all model; We will need to know with or without chrome tips
- MY 1978-79 with a 403ci & 1979 with a 301W; We will need to know with or without chrome tips. All other engines and 1980-81 models did not have the chrome tip option.
-
This listing covers model years 1967, 1968, and 1969 Firebird's with the stock V8 and stock dual exhaust. Photos depicts the exhaust system for MY's 1967-68 Firebirds stock V8 (except 400HO & Ram Air).- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, dual in/dual out transverse muffler, and LS/RS tailpipes.
- The system for the Non HO or RA engines starts out at 2"OD, increases to 2¼"OD at the connector pipes, then decreases back to 2"OD.
- The system exhaust pipes for HO & RA engines are 2¼"OD flared to 2½"OD at the manifolds, connector pipes are 2¼"OD and then reduces to 2"OD on the tailpipes.
- Regarding HO & RA setups: We are no longer able of offer the stock cast iron flanges. The exhaust pipes will come with universal flanges. If you have the stock cast iron flanges, keep them and reuse them.