- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1955 and 1956 Bel Air's 265ci V8 and stock dual exhaust. This listing excludes 1955-56 Chevy Station Wagon's & Sedan Delivery's which are stock with a single exhaust only. Refer to 588604 for the stock single exhaust. Photo depicts the stock dual exhaust system for a 1955 Bel Air with the stock 265ci V8. -
This listing covers model year 1962, 1963, and 1964 LeSabre, Wildcat, and Electra's with stock V8 and dual exhaust. Photo depicts the system for a 1963 Buick Wildcat / LeSabre. Pipes will vary depending on transmission and body style.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS front connector pipes, LS/RS rear connector pipes, dual in/dual out transverse muffler and LS/RS tailpipes. Metal-to-metal connection at the manifolds, no gaskets required at the manifolds. These systems DO require gaskets at the muffler inlets & may be added to your cart.
-
This listing covers model years 1960 and 1961 Buick LeSabre, Invicta, Electra and Electra 225 with V8 dual exhaust and a transverse muffler. Photo depicts the stock dual exhaust for 1961 Buick Invicta's & LeSabre's with the stock V8.- The dual exhaust consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, dual in/dual out transverse muffler, and LS/RS tailpipes.
- Metal-to-metal connection at the manifolds, no gasket required.
- 1960 models are flanged connected between the front and rear exhaust pipes but then clamped the remainder of the system.
- 1961 models are flanged connected until the tailpipes, which are clamped on.
-
This listing covers model years 1956, 1957, and 1958 Century, Special and Super's. Photo depicts the system for a 1956 Buick Special Model 41 (with the tailpipe cut)- Single exhaust system consists of Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1967, 1968, and 1969 AMC American/Rambler's with a straight 6 cyl. Photo depicts the stock single exhaust for 1967-68 AMC Rambler American's HT's & Sedan's with the 199ci 6cyl. Convertibles & SW require a different system, as does the 232ci 6cyl.- The single exhaust system consists of front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 for Rebel, Ambassador, Classic, Marlin, American, Gremlin, Hornet, Javelin and AMX's with V8 and single exhaust. Photo depicts the system for a 1965 AMC Rambler Ambassador with the stock 327ci.- For MY's 1959-62 this single exhaust system consists of 2 pc. Y (cross-over & Y pipe), muffler and tailpipe.
- For MY's 1963-64 3 Seat Station Wagons this single exhaust system consists of 2 pc. Y (cross-over & Y pipe), rear exhaust pipe, muffler and tailpipe.
- For MY's 1963-74 (except the 3 Seat SW) this single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- Some Y pipes may be NORS.
-
This listing covers model years 1976, 1977, 1978, 1979, & 1980 CJ5's and CJ7's stock from the factory with a converter. Photo depicts the stock single exhaust, including the catalytic converter, for 1977-78 CJ5's with the stock 258ci. (1976 takes a different tailpipe).- The single exhaust system consist of the exhaust pipe, muffler, & tailpipe.
- If the converter is needed, you may add it to the order for an additional $335.00.
-
Photo is correct to this stock dual exhaust listing.- Stock Dual exhaust system includes LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, dual in/dual out transverse muffler and LS/RS tailpipes.
- Stock pipe diameter is 2¼"OD through out.
-
This listing covers MY's 1932, 1933, 1934 & 1935 Lincoln K Series stock with the V12. Photo depicts the stock single exhaust for 1932-33 Lincoln K Series with the stock V12- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Original exhaust pipe was 2¾"OD. In reproduction it will be 2"OD flared to 2¾"OD with a flat flare. We do not have the needed gasket available or the proper flange for this connection. If you have the original cast iron flange, you will want to reuse it.
-
This listing is for 1975 CJ-5's and CJ-6's with the stock V8 without a converter (not for CJ's that were stock with converter). Photo depicts the single exhaust system offered stock without a catalytic converter for 1975 CJ5's with the stock V8 304ci.- This system consist of the Y pipe, rear exhaust pipe, muffler, and tail pipe.
-
Waldron's Exhaust reproduces this OE correct muffler hanger used at the outlet end of the resonator. Used in 1972 & 1973 by Ford on the Thunderbird and by Lincoln on the Mark IV. Hangers generally ship out within 1 wk. -
Out of stock
This muffler hanger is used on most 1941-66 Chevy trucks and on 1959-66 GMC trucks & vans. The strap is made of stainless steel. Currently unavailable.