- Single exhaust consists of exhaust pipe, muffler, and tailpipe.
- On MY's 1928 & 1929 the exhaust pipe will come without a flange and without a flare.
-
This listing covers model years 1928, 1929, 1930, 1931, and 1930 Durant's. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. -
This listing covers model years 1928, 1929, 1930, 1931, and 1932 Plymouth's with the stock 4 cyl engine. Photo depicts system for a 1931 Plymouth PB.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe. The exhaust pipe will not come with a flange. When possible, reuse the original cast iron flange.
-
This listing covers model years 1928, 1929, 1930, 1931, 1932, and 1933 Marmon's with the stock 8 cyl. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1938, 1939, and 1940 Cadillac's with the stock single exhaust stock with 1 muffler. Excludes Model 65. MY's 1936 & 1937 V8's are stock with muffler & resonator. Photo depicts the single exhaust system for 1932-33 Cadillac's with the stock V8- For MY's 1928-31 the single exhaust system consists of exhaust pipe, muffler and tailpipe. You will be asked to report the angle of your manifold in the check out process.
- For MY’s 1932-33 the single exhaust system consists of a front exhaust pipe, rear exhaust pipe, muffler, and tailpipe. Trimming may be required to fit exhaust pipe to the manifold. OE system was flanged connected between front and rear exhaust pipes but our system will be a “slip-fit” design. Waldron’s does not offer a gasket for this system.
- For MY's 1934-40 the single exhaust system consists of exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, and 1946 President, Commander, and Dictator with the stock straight 8 and single exhaust. Photo depicts the stock single exhaust for 1938 Lincoln Presidents with the stock Straight 8- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1928, 1929 and 1931 Auburn's, excluding Beverly's. Photo depicts the system for MY's 1931-34 Auburns.- System consists of exhaust pipe, muffler and tailpipe. Flange will be laser cut steel, not a cast iron flange.
-
This system covers MY's 1929 and 1930 Essex's with the stock 6 cyl. engine. Photo is correct to the listing.- System consists of exhaust pipe, muffler, and tail pipe. Stock pipe diameter is 1¾" throughout. The exhaust pipe does not use a flange.
-
This listing covers MY's 1929 & 1930 Roosevelt's with the stock 8 cyl. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Single exhaust consists of the exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1929, 1930, and 1931 L-29. Photo is correct to the listing.- This exhaust system consists of the front exhaust pipe, rear exhaust pipe, and muffler. This also includes new manifold and connector pipe flanges (laser cut steel, not a cast flange). The tailpipe does not come with our system. If you are in need of the special tailpipe contact Ken's Classic in Pittsfield, ME; 207-487-3622.
-
This listing covers model years 1929, 1930, and 1931 Model A's. Photo depicted is correct to the listing.- This is a one piece unit and consists of the exhaust pipe, tapered muffler and tailpipe. Available in aluminized steel, only.
- Exhaust pipes does not take a flange, it has a flare that uses a special nut which is not provided.
-
This listing covers model years 1929, 1930, and 1931 Model A's. Photo depicted is correct to the listing.
- This is a one piece unit and consists of the exhaust pipe, tapered muffler and tailpipe. Available in aluminized steel, only.
- Exhaust pipes does not take a flange, it has a flare that uses a special nut which is not provided.
-
Photo is correct to the listing and fits 1929, 1930, 1931 & 1932 Jordan Model G 90 Series with the stock straight 8.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
- This model has the 125"WB
- This system starts out at 2¼"OD and reduces down to 1¾"OD at the tailpipes.
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, and 1934 American Austin's and 1938, 1939, and 1940 American Bantam's. Photo depicts system for MY's 1938-40 Bantam.- The single exhaust consists of the exhaust pipe, muffler and tailpipe.
- Exhaust pipes is 1½" OD with a 4blt flange.
- Gaskets are NA
- Please note that these tailpipes are 1" OD and will be Mild Steel (1" OD tubing is not available in either aluminized or T409 stainless steel) no matter which material you choose for the system. Also 1" clamps are not available in stainless steel so clamps needed at the tailpipe will be steel (only).
-
This listing covers model years 1924, 1925, 1926, 1927, 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935 w/6 cyl, 1936, 1937, 1939, 1940, and 1941 Hupmobile's. Excludes 1935 w/8 cyl & 1936 w/6 cyl. Photos depicts system for 1933-34 Hupmobile's.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, and 1940 Chevy trucks with a 6 cyl engine. For MY's 1929-32, this system is an alternative to the original 1 pc. design. Photo depicts the stock single exhaust for 1929-31 Chevy ½T with the stock 6cyl.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1929, 1930, 1931, 192, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, and 1941 Graham except 1938-39 Supercharged 6. See listing 518778 for a Supercharged 6 system. Photo depicts the system for a 1930 Graham Paige.- Single exhaust system consists of front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936,1937, 1938, 1939, 1940, 1941, 1942, 1946, 1947, and 1948 Chevrolet's with the stock 6 cyl. Photos depicts the system for a 1939 Chevrolet Master 4 dr.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- The last 15" of the tailpipe on 1946-48 models will be flatten to an oval shape.
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, and 1954 Desoto's stock with a 6 cyl and single exhaust. Photo depicts the system for a 1949 Custom / Deluxe (exc. convertibles or 8 passenger).- Single exhaust consists of exhaust pipe, muffler, and tailpipe.
-
Photo depicts the system for this listing.- The single exhaust for the Super 6 consists of exhaust pipe, muffler and tailpipe. The exhaust pipe is 2"OD and reduces to 1¾"OD at the tailpipe.
- Exhaust pipe will come with a steel 3blt flange. The original was cast iron. If you have the original cast iron flange and would like to reuse it, you will need to send it to us in advance of the system being built.
-
Listing covers MY's 1930, 1931, and 1932 Desoto's stock with an 8 cyl and single exhaust.- Single exhaust system consists of exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1930, 1931, & 1932 Models DC & DG stock with the 8 cyl. and 1 muffler.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1930, 1931, 1932 & 1933 Cadillac's stock with dual exhaust and their respective stock V12 or V16. Photo depicts the stock dual exhaust for 1931-33 Cadillac Models 370A, 370B & 370C with the stock V12.- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes. Exhaust pipes originally used cast iron flanges. We do not have them available and no flanges will come with the system.
- MY 1930 exhaust pipe is stock 2¼" and reduces to 1¾" at the muffler outlets.
- MY's 1931-32 exhaust pipe is stock at 2½" and reduces to 1 7/8" at the muffler outlets.
-
This listing covers model years 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, and 1939 Willys models 98B, 97, 98D, 8-80D, 90, 77, 37, and 38 with the stock 4 cyl or the stock 6 cyl. Photo depicts the stock single exhaust for 1930 Willys 98B.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, and 1942 Pontiac Models 401, 402, 601, 603, 605, 701 Standard and Deluxe, 36-32BA Deluxe, 36-26BB Master, 26-28BA DeLuxe 37-26CA DeLuxe, 37-28CA DeLuxe, 6-DA, 8-DA, Torpedo, and Streamliner's with the stock 6 or 8 cyl engines. Photo depicts the system for a 1930 (only) Pontiac with the stock 6 cyl.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.