- This dual exhaust in unique and consists of the H pipe, LS/RS rear exhaust pipe, LS/RS mufflers, LS/RS tailpipes, and transverse resonator.
-
Photo depicted is correct to the listing. -
This listing covers model years 1966, 1967, 1968, 1969, 1970, and 1971 Fairlane & Torino's, 1970-71 Ranchero's with the stock V8 and stock dual exhaust. Excludes 1966-69 Ranchero's & SW's which were stock with a single exhaust only. For 1967 Fairlane & Torino models, this is a resonator eliminator option. For the stock set up, refer 518765. Photo depicts the system for a 1970 Torino SCJ- Dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
- Single exhaust system consists of the Y pipe, rear exhaust pipe, front muffler, over-axle pipe, and transverse muffler with tailpipe.
-
This listing covers model years 1963, 1964, & 1965 Fairlane A codes and K codes with the stock V8. Photo depicted is correct to the listing however H pipes vary between engines.- This dual exhaust system consists of the H pipe, LS/RS muffler assembly's, and LS/RS resonator with turndowns.
-
This listing covers model years 1962, 1963, 1964, and 1965 Fairlane's stock with the V8 and single exhaust. If your 1963 or 1964 Fairlane was stock with a 4bbl carburetor, refer to SKU 518897. Photo is correct to the listing & reflects a system where the customer opted to save on shipping and had the rear exhaust pipe cut. Parts vary between MY's, engine, and carburetor set up.- Single exhaust system consists of the Y pipe, rear exhaust pipe, and muffler with turndown. Y pipe may be NORS.
- MY 1962 with the 221ci will need to report whether the system was stock at 1¾" (Y pipe is flared to 2" at the manifold and runs 1¾" throughout) or 2" (throughout) in the check out process. 1963-65 models are all 2" throughout.
- MY 1963 will need to report Early or Late model; early MY '63 took a muffler with a 25" body length while the late model year system took a muffler with a 27" body length.
-
This listing covers model years 1962, 1963, 1964, 1965 and 1964 Fairlane's stock with a 6 cyl and single exhaust. Photo depicts the system for MY's 1963-65 Fairlane's with the stock 6 cyl.- 1962-65 models consist of the front exhaust pipe, rear exhaust pipe, and muffler w/tailpipe.
- 1966 models consist of the front exhaust pipe, rear exhaust pipe, and transverse muffler w/tailpipe.
-
This listing covers 1975 & 1976 Mustang's stock with a V6 171ci or a V8 302ci and were stock with catalytic converters.
- The V6 171ci dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. H pipe will be NORS.
- The V8 302 dual exhaust consists of the LS front exhaust pipe (AKA extension pipe), H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. H pipe will be NORS.
- This set up does not eliminate the converters and they must be in place. Waldron's Exhaust cannot help with replacement converters.
-
This listing covers MY's 1974 Mustang's with the stock V6 171ci and 1975 Mustang's stock with the V8 302ci that were stock without catalytic converters. Photo depicts the system for a 1974 Mustang with the stock V6 171ci.- 1974 system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. You will need to report whether there is a 6¾" or 8" ring gear on the rear axle in the check out process.
- 1975 system consists of the LS exhaust (aka extension pipe), H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. H pipe which will be NORS. You will need to report the build date of your 1975 Mustang in the check out process.
-
Photo depicts the stock single exhaust (minus the needed converter) for 1977-78 Mustangs stock with the 302ci V8 & a 12" catalytic converter.- Single cat-back consists of the rear exhaust pipe, front muffler, over-axle pipe, rear muffler, and tailpipe.
- If the Y pipe (AKA front exhaust pipe) is needed, you may add it to your order in the check out process. You will be asked to confirm whether needed or not.
- If you are in need of the catalytic converter, please give us a call at 1-800-503-9428.
-
Photos depicts the stock cat-back single exhaust for 1976 Mustang II's with the stock 302ci V8.- Single cat-back exhaust consists of the Y pipe, front muffler, over-axle pipe, rear muffler, and tailpipe.
- Y pipe may be NORS
- The LS/RS catalytic converter-pipe assembly's are not available .
-
This listing covers MY's 1975 & 1976 Mustang's with the stock 302ci V8 and starts behind the converters.
- Single cat-back exhaust starts with at the Y pipe and consists of the Y pipe, resonator, over-axle pipe, muffler, and tailpipe. If front exhaust pipes with converters are needed, please contact us for pricing and availability.
-
- Single cat-back exhaust system consists of the rear exhaust pipe, front muffler, over-axle pipe, rear muffler and tailpipe. If Y pipe and/or catalytic converter are needed, please give us a call for price and availability.
-
- Single cat-back exhaust consists of the Y pipe, front muffler, over-axle pipe, rear muffler, and tailpipe. If LS/RS front exhaust pipe w/converters are needed, please contact us for pricing and availability.
-
Photo depicts the cat-back single exhaust for 1977-78 Mustang's with the stock 4cyl. and a 7¼" converter (shell length).- Single exhaust system starts behind the catalytic converter and consists of the center exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
- You will be asked to report the shell length of the stock catalytic converter in the check out process.
-
This listing covers model years 1975 and 1976 Mustangs with the stock 4 cyl and starts behind the catalytic converter.
- Single exhaust consists of rear exhaust pipe, front muffler, over-axle pipe, rear muffler, and tailpipe. If front exhaust w/converter is needed, please contact us for pricing and availability.
-
This listing is for 1974 and 1975 Mustangs stock with the 4cyl 2300 & stock without a converter. Photo depicts the stock single exhaust system for 1974 Mustang with the stock 4cyl. 1975 models systems are almost identical but require a different rear exhaust pipe.- Single exhaust consists of the front exhaust pipe, rear exhaust pipe, front muffler, over-axle pipe, rear muffler and tailpipe.
-
This listing covers model years 1968, 1969, 170, 1972, and 1973 Mustang's with the stock V8 and single exhaust. For MY 1973 with a 351ci, this listing is a resonator eliminator option. Photo depicts the system for a 1969 Mustang stock with a 351ci V8 & 1970 Mustangs with the stock 351W.- Single exhaust consists of Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
For MY 1967 Mustang with the 6 cyl this is a resonator eliminator option. For MY's 1968, 1969, 1970, 1971, 1972, and 1973 Mustang's with the 6 cyl this is the stock set up.
- Single exhaust consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This dual exhaust listing is an alternative design which eliminates the stock transverse muffler and puts mufflers up where stock resonators would sit. Listing covers model years 1967, 1968, and 1969 Mustangs with their respective stock V8; 289ci, 302ci, 390ci, 427ci, 428ci, or 429ci. For the OE correct dual exhaust system, refer to listing 518740. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Dual alternative design exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. This is not an OE correct system and OEM hangers may not work.
-
This listing covers model years 1970 (302ci, 351ci, 428ci) 1971 (351ci, 429ci, 302ci) 1972 and 1973 (351ci) Mustang's including Boss, GT, and Cobra Jet stock with a 2 muffler dual exhaust. For the OE correct system for a 1970 Mustang stock with the 429ci, refer to SKU 518740. Photo depicts the stock dual exhaust for a 1970 Mustang (non GT) with the stock 351W.- Dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS. Excludes the chrome tips.
-
This listing covers model years 1967 (289ci, 390ci) 1968 (428ci, 427ci, 390ci), 1969 (428ci, 429ci, 390ci, 351ci, 302ci), and 1970 (429ci only) Mustangs with their respective stock V8 and dual exhaust. For MY 1970 Mustangs with a 351ci or 428ci; refer to listing 518741. If you would prefer a dual exhaust that eliminates the transverse muffler, refer to listing 518748. Photo depicts the system for a 1969 Mach 1.- Dual exhaust system consist of the H pipe, LS/RS rear exhaust pipes with resonators, dual in/dual out transverse muffler, and LS/RS tailpipes.
- Excludes the chrome tips.
- Tell us how your would like your tailpipes to exit in the check out form below.
-
Photo depicted is correct to the listing.- This single exhaust consists of the front exhaust pipe, rear exhaust pipe with resonator, transverse muffler, and tailpipe. It is 2"OD throughout.
-
This listing covers model years 1965, 1966, 1967, 1968, and 1969 Mustangs with a V8 and allows owners of A Code's & some K Code's to update their Mustang's to the unique sound of the Arvinode dual exhaust. For 1965-66 K Code's this is the stock set up. This concours correct Arvinode system has the chamber tube that runs along the top of the muffler/resonator and gives you the true original Arvinode sound. Photo is correct to the listing.- The Concours Arvinode dual exhaust system starts behind the stock H pipe and includes the LS/RS connector (AKA rear exhaust) pipes, LS/RS wave-tuned front mufflers with rectangular external tubes, LS/RS over-axle pipes, LS/RS resonators with turndowns or GT exit.
- These parts were welded into LS and RS assembly's from the factory and connected with clamps to the outlet end of the H pipe.
- If the H pipe is needed, you may add to your cart in the check out process.
- Let us know if you need the GT exit or turndowns in the check out process.
-
This listing covers model years 1965, 1966, 1967, 1968, and 1969 Mustangs with a V8 and allows owners of A Code's & some K Code's to update their Mustang's to the unique sound of the Arvinode dual exhaust. For 1965-66 K Code's this is close in appearance and sound to the stock set up. If you would like to have the stock set up for your 1965-66 K Code, which has the factory correct chamber tube tied into the muffler/resonators, please refer to listing 518737. The Base Model does not have the chamber tube that runs along the top of the muffler/resonators which gives the Concours the OEM correct look for 1965-66 K Code models. Photo depicted is correct to the listing.- The Base model Arvinode dual system starts behind the stock H pipe and includes LS/RS connector (AKA rear exhaust pipes), LS/RS wave-tuned front mufflers WITHOUT externally mounted rectangular tubes, LS/RS over-axle pipes, LS/RS resonators with turndowns or GT exit.
- These parts were welded into LS and RS assembly's from the factory and connected with clamps to the outlet end of the H pipe.
- If the H pipe is needed, add it to your cart in the check out process.
- Let us know if you need the GT exit or turndowns in the check out process.