- For 1970-71 Challengers this single exhaust will consist of the front exhaust pipe, rear exhaust pipe & muffler with tailspout. All other systems consists of exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, and 1976 Dodge Dart, Challenger, Lancer, and Swinger's with the stock 6 cyl. Starting in 1973, Dodge offered Darts with resonators. If your system was stock with resonators and you would like to keep it stock, refer to listing 528709. Photo depicts the stock single exhaust for 1962 Dodge Lancers (exc. station wagon's) with the stock 225ci 6cyl. -
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Dodge Dart, Lancer, Demon and Challenger's with a V8 and stock with a 1 muffler single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- MY's 1964-69 and 1970-74 Challenger single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- MY's 1970-74 Dart single exhaust consists of Y pipe, muffler, and tailpipe.
-
This listing covers MY's 1965 and 1966 Dodge Darts stock with the 273ci V8 and 4 BBL carburetor. Due to our manufacture loosing our pattern for the special tip, our last shipment of this part was not up to our standards and this listing no longer includes the special resonator. If you would like to see what we can offer regarding this resonator, please refer to SKU Arvin1212. Photo is correct to the listing.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, over-axle pipe, and resonator eliminator pipe (integral resonator with rectangular polished stainless steel outlet has been eliminated).
- Waldron's Exhaust does not offer over-sizing on this system. Y pipe starts off the manifolds at 1&7/8"OD and increases to 2½"OD where the Y pipe comes together, rear exhaust pipe is 2½"OD and reduces to 2¼"going into the muffler and stays 2¼" through remainder of system.
-
This listing covers model years 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 GTS, Swinger, and Dart's V8 (except 273ci or 318ci) stock with a dual exhaust with 2 mufflers. Photo depicts the system for a 1968 Dart with the stock 340ci.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Challenger's with the stock 340ci, 383ci, or 440ci and the stock dual exhaust system with mufflers and resonators. Excludes 426ci engine since that system requires an H pipe. Photo depicts the system for 1970-71 Dodge Challenger's stock with the 440ci and 3-2 bbl carburetor set-up.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, and LS/RS mufflers w/tailspout (only certain set-ups). Some systems (depending on engine and carburetor setup) were stock with chrome tips which are NOT part of this system.
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Challengers. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust system consists of Y pipe, rear exhaust pipe, muffler and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1973, 1974, 1975, and 1976 Dart's with the stock 6 cyl engine and stock with a resonator. Some 1972 Dodge Challengers were stock with resonators but the exhaust pipe for that system has never been reproduce so until we procure that pipe, the complete system is unavailable.- Single exhaust consists of the exhaust pipe, muffler, over-axle pipe, and resonator with tailpipe.
-
This listing covers model years 1928, 1929, 1930, 1931, and 1930 Durant's. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust consists of exhaust pipe, muffler, and tailpipe.
- On MY's 1928 & 1929 the exhaust pipe will come without a flange and without a flare.
-
This listing is for all 1958 Pacers, Rangers, Citations, Corsairs, Round Up, Bermuda, and Villager's with the stock V8 and dual exhaust. Photo depicts the system for 1958 Edsel Corsair & Citation HT's.- Dual exhaust systems for 1958 Pacer or Ranger Station Wagon's consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailspout. All others body styles with dual exhaust consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with 5" round resonator's built in, and LS/RS rear tailpipe. These systems are stock at 2"OD through out.
- Dual exhaust systems for 1958 Corsair or Citation consists of LS/RS exhaust pipes, balance tube, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailspout.
-
This listing is for all 1958 Pacer, Ranger, Citation & Corsair's with the stock V8 and single exhaust, including convertibles. Photo is correct to the listing.- Single exhaust consists of the Y pipe, muffler, front tailpipe with resonator, and rear tailpipe.
-
This listing is for all body styles 1959 Pacer, Ranger, Citation, and Corsair's with the stock V8 and dual exhaust. Photo depicts the exhaust system for 1959 Edsel's, except convertibles and station wagons.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes. From the factory, these tailpipes were all in 1 piece but are so long that they must be reproduced in 2 sections.
-
This listing covers 1959 & 1960 Edsel's (exc. 1960 convertible) with the stock 6 cyl. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- For MY 1959 the single exhaust consists of the exhaust pipe, muffler, and tailpipe. Listing covers all body styles.
- For MY 1960 the single exhaust consists of the front exhaust pipe, rear exhaust pipe, and muffler with tailpipe. Listing excludes Edsel convertibles.