- This dual exhaust system is stock with 4 mufflers; LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, and LS/RS mufflers w/hanger bracket & tailspout welded in proper positions.
-
This listing covers MY's 1961, 1962, 1963, and 1964 Monterey's, Commuter's, Colony Park convertibles, and in 1964 the Marauder's with the stock V8 292ci, 352, 390, and introduced in 1963 the 406ci 427ci. For these MY's and any other body style; refer to listing 453452. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. -
Photo depicts the dual exhaust system with resonator eliminator pipes (vs with the stock resonators). For the stock system with resonators refer to SKU 568787.- Stock Dual exhaust system includes LS/RS exhaust pipes, LS/RS resonators eliminator pipes, LS/RS connector pipes, dual in/dual out transverse muffler and LS/RS tailpipes.
- Stock pipe diameter is 2¼"OD through out.
-
Waldron's Exhaust developed this unique dual exhaust system using a factory OEM exhaust system. Photo depicted is correct to the listing.- This system consists of LS/RS exhaust pipes with stainless steel flex wrap, LS/RS resonator pipes, LS/RS over-axle pipes with balance tube, LS/RS mufflers and LS/RS tailpipes.
- This system starts out at 2"OD on the exhaust pipes which reduce to 1¾"OD at the resonator inlets and then remains at 1¾"OD throughout the remaining of the system.
-
Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, LS/RS rear mufflers, and LS/RS tailpipes.
-
This listing covers model years 1974, 1975, and 1976 Coronet's and Charger's stock with a 360ci or 400ci and a dual exhaust system with mufflers and resonators. This models in 1975 and 1976 were stock without catalytic converters. Excludes 1974's with the 440ci.- Dual exhaust system consists of LS front and rear exhaust pipes, RS exhaust pipe, LS/RS front mufflers, LS/RS connector pipes, and LS/RS rear mufflers with tailspouts.
-
This listing is for folks who want to keep their 1967 Comet, stock with a 390ci or 427ci V8, true to stock with the resonator. For a resonator eliminator option, refer to listing 453470. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS tailpipes, and transverse muffler (sits between tailpipes).
-
This listing covers model years 1957, 1958, 1959, and 1960 Cadillac's stock with a dual exhaust with 4 mufflers. Photo depicts the system for MY's 1959-60 Cadillac's except 75 Fleetwood and Eldorado Brougham (front connector pipe varies for the Fleetwood, rear connector pipe varies for the Brougham).- Dual exhaust system consists LS/RS front exhaust pipes, LS/RS rear exhaust pipe, LS/RS front mufflers, LS/RS front connector pipes, LS/RS center connector pipes, LS/RS rear connector pipes, LS/RS rear mufflers, LS/RS tailpipes. 1957 models will fit into the factory tips located in the bumper. 1958-60 are stock with turndowns.
-
This listing is for all 1958 Pacers, Rangers, Citations, Corsairs, Round Up, Bermuda, and Villager's with the stock V8 and dual exhaust. Photo depicts the system for 1958 Edsel Corsair & Citation HT's.- Dual exhaust systems for 1958 Pacer or Ranger Station Wagon's consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailspout. All others body styles with dual exhaust consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with 5" round resonator's built in, and LS/RS rear tailpipe. These systems are stock at 2"OD through out.
- Dual exhaust systems for 1958 Corsair or Citation consists of LS/RS exhaust pipes, balance tube, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailspout.
-
This listing covers model years 1967, 1968, 1969, 1970, 1971, and 1974 Thunderbird's. Excludes 1972 and 1973 T-birds which were stock with a single exhaust. Photo depicts the system for a 1967 Thunderbird with the stock 390ci.- Dual exhaust consists of an H pipe, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailpipes. H pipe may be NORS.
-
This listing covers MY's 1975 and 1976 Thunderbirds stock with the V8 and a dual exhaust system. This system starts after the converter(s). Photo depicts the system for 1975-76 Thunderbird stock with the 460ci and 2 catalytic converters.- This dual cat-back exhaust system consists of the H pipe, LS/RS front mufflers, LS/RS over-axle pipes, and LS/RS rear mufflers with tailpipes. H pipe may be NORS.
- 1975 T-birds came stock with either 1 cat on the LS or 2 cats and all 1976 T-birds were stock with 2 cats. Report which you have in the check out process.
- For models w/2 catalytic converters the H pipe will be 2 pc.
-
This listing covers MY's 1958, 1959, and 1960 Lincoln Continental Premiere's & Capri's with the stock V8. Photo depicts the dual exhaust for all models in 1958 with the stock V8 430ci.- Dual exhaust system consists of the cross-over pipe, LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS mufflers, and LS/RS tailspouts.
-
This listing covers MY's 1961, 1962, and 1963 Continentals with the stock V8.- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
- Waldron's does not offer any sound level options on these systems. OEM sound level only.
-
This listing covers MY's 1964-65 Lincoln Continentals with the stock V8.- Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
- Waldron's does not offer any sound level options on these systems. OEM sound level only.
-
This listing covers model years 1966, 1967, 1968, and 1969 Continentals with the stock V8.- Dual exhaust consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
- Waldron's does not offer any sound level options on these systems. OEM sound level only.
-
Listing covers model years 1969, 1970, and 1971 Mark III with the stock V8 and dual exhaust. Photo depicts exhaust system for 1969-71 Lincoln Mark III.- Dual exhaust system consists of the H pipe, LS/RS mufflers, LS/RS connector pipe, and LS/RS resonator w/tailspout.
- This stock system starts out at 2¼"OD and reduces down to 1¾"OD at the muffler outlets.
-
Photo depicted is correct to listing.- Dual exhaust system consists of the H pipe, LS/RS front mufflers, LS/RS connector pipe, LS/RS rear mufflers with tailpipes.
-
This listing covers model years 1975, 1976, 1977, and 1978 Mark IV and Mark V's. Photo depicts the dual cat-back system for a 1978 Mark V stock with converters on both manifolds. This photo was taken long ago and shows the resonator inlet pipe as a separate pc. We now have patterns for the LS/RS resonators and that pipe is now an integral part of the resonators.- Dual cat-back exhaust system consists of the H pipe (2 pc.), LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailpipe. Please be certain to specify if your Mark is stock with 1 or 2 cats during the check our process.
-
- This dual exhaust consists of the H pipe, LS/RS glasspack design mufflers, and tailpipes w/glasspack design resonators.
-
This listing covers MY's 1955 and 1956 Packard Patrician, Caribbean, 400, Executive, Clipper Super, & Custom's with the stock V8. Excludes 1955 Packard convertibles which we do not have the needed patterns to reproduce at this time. Photo depicts the dual exhaust system with resonators for a 1956 Packard Patrician or Caribbean with the stock V8- Dual exhaust consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes with resonators built in.
- Waldron's does not offer a "with cut pipes" option on this dual exhaust.
-
This listing covers model years 1957 and 1958 full size Buick's with dual exhaust. Photo depicts the system for a 1958 Buick Roadmaster.- This system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with short tailpipes. This system is a metal-to-metal connection at the manifold and no gaskets are required.
-
Listing covers MY's 1960 and 1961 Chryslers stock with the Ram Induction setup. Photo is correct to the listing.- Ram Induction dual exhaust system consists of LS/RS front exhaust pipes (AKA preheater tubes), LS/RS center exhaust pipes, cross-over (these 5 pipes make up an "H" pipe), LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes along with the 1&1/8" clamps needed at the preheater tubes.
- The tailpipes are short on the 300; they end in front of the bumper and they are tucked up tightly under the trunk pan. You can’t see the tailpipe tips from the side of the vehicle.
- The tailpipe hangers attach at the radius of the turndown, not on a straight section of pipe. This is a Waldron's exclusive design.
-
This listing covers 1960 and 1961 DeSoto's with the Ram Induction set up. Photo depicted is for a 1960-61 Chrysler and is posted here since these systems are very similar in configuration (but require different parts).
- Ram Induction dual exhaust system consists of LS/RS front exhaust pipes (AKA preheater tubes), LS/RS center exhaust pipes, cross-over (these 5 pipes make up an "H" pipe), LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes along with the 1&1/8" clamps needed at the preheater tubes.
-
Listing covers model years 1960 and 1961 Dodge's with the Ram Induction set up. Photo depicted is for a 1960-61 Chrysler and is posted here since these systems are very similar in configuration (but require different parts).
- Ram Induction dual exhaust system consists of LS/RS front exhaust pipes (AKA preheater tubes), LS/RS center exhaust pipes, cross-over (these 5 pipes make up an "H" pipe), LS/RS rear exhaust pipes,LS/RS mufflers, and LS/RS tailpipes.
-
Photo depicted is for a 1960-61 Chrysler and is posted here since these systems are very similar in configuration (but require different parts).
- Ram Induction dual exhaust system consists of LS/RS front exhaust pipes (AKA preheater tubes), LS/RS center exhaust pipes, cross-over (these 5 pipes make up an "H" pipe), LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipe along with the 1&1/8" clamps needed at the preheater tubes.
-
Photo is correct to this stock dual exhaust listing.- Stock Dual exhaust system includes LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, dual in/dual out transverse muffler and LS/RS tailpipes.
- Stock pipe diameter is 2¼"OD through out.
-
This listing covers model years 1965, 1966, 1967, 1968, and 1969 Chevelle, Malibu and El Camino's V8 dual exhaust stock with 2 mufflers and 2 resonators. Excludes the 396ci High Performance since these system are stock without resonators. For that listing, refer to 588642.
- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tail pipes with bullet style (only) resonators.
-
This listing covers MY's 1966 and 1967 Ford 7-Liter's stock with the 428ci V8. If you have a 1966 427ci or a 1967 427ci in your Ford 7-Litre (instead of the stock 428ci) we can help you put a 7-Litre system on your Ford. Photo depicts the system for MY 1966 7 Litre.- Ford 7-Liter exhaust system consists of the H pipe, LS/RS front glasspacks, and LS/RS rear tailpipes w/glasspacks. Tailpipes include welded hanger attachment brackets and angle-cut turn-downs as shown.
- Pipe diameter of the stock 428ci is 2"OD through out. The 427ci H pipe starts out at 2½" OD but quickly reduces to 2" and remains 2" through out.
- The body diameter of all 4 glasspacks will be 3½" OD if order an aluminized steel system and 3" OD if ordering a T409 stainless steel system.
-
This listing covers model years 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Buick Riviera with V8 and allows you to delete the stock resonators. Photo depicts the system for a 1966 Buick Riviera with the stock V8 (with rear exhaust pipes cut to reduce shipping). MY's 1967-70 Riviera's take different exhaust pipes at 2¼"OD with flat spots but all other parts shown in the photo are correct.- 1966-70 Riviera exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front connector pipes, LS/RS rear connector pipes, LS/RS resonators w/tailpipes.
- 1971-74 Riviera exhaust system consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonators w/tailpipes.