- Dual exhaust system consists LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
This listing cover model years 1965, 1966, 1967, 1968, and 1969 full size Chevy Bel Air, Impala, and Caprice's with the stock V8. The 283ci, 237ci, std. 396ci, and std. 427ci. V8's were all stock with resonators. Select this system if you would like to eliminate the resonators (refer to listing 588615 for the true stock dual exhaust). This is the stock exhaust system for a 396 SHP and 427 SHP V8. Photo depicts a system true to this listing. Pipes vary depending on the engine and body style. -
This listing covers model years 1965, 1966, 1967, 1968, and 1969 Bel Air, Impala, and Caprice's V8 stock with dual exhaust with mufflers and resonators. In these MY"s, all body styles and all engines, except the 396SHP and the 427SHP, were stock with resonators. See listing 588616 if you have the SHP 396ci or 427ci or if you would like to eliminate the resonators from your system. Photo depicts the dual exhaust for 1969 Bel Air, Biscayne, Caprice & Impala's with the stock 396ci or 427ci V8.- Dual exhaust system consists LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes with bullet style (3½" body diameter) resonators (oval style NA).
-
This listing covers model years 1965 and 1966 BelAir, Impala, Biscayne, Caprice, and Super Sport's with the stock 327ci or 396ci. Both of these engines where stock with muffler & resonator. The 283ci engine was stock w/1 muffler (refer to 588617).- Single exhaust consists of the Y pipe, muffler, and tailpipe with bullet style resonator (oval style is NA).
-
This listing covers model years 1965, 1966, and 1967 Bel Air, Impala, Biscayne, Super Sport, and Caprice's with the stock V8. MY 1967; this is OE correct for all engines. MY's 65-66; this is OE correct for the 283ci and a resonator eliminator option for the 327ci & 396ci (which were stock with resonator). Photo depicts the stock single exhaust system for 1965-66 Chevy Full Size with the stock 283ci V8 (stock without a resonator).- Single exhaust system consists of the Y pipe, muffler, and tailpipe. Y pipe may be NORS.
- For MY's 1965-67 stock with the 283ci; we will need you to report the desired tailpipe exit in the check out process.
-
This listing covers model years 1961, 1962, 1963, and 1964 Chevy Impala, Bel Air, Biscayne, and Super Sport's with the stock V8 283ci, 327ci (small or big block), 348ci (small or big block), and 409ci (big block) and allows you to eliminate the resonators (all MY's & body styles were stock with resonators). Photo depicted is correct to the listing but pipes vary slightly depending on engine displacement, body style, etc.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes, and LS/RS tailpipes.
- Big Block engines will have an additional cost of $40.00 added to system price.
- Our pattern exhaust pipes have the piece that some call an extension (we call it an insert) incorporated into the exhaust pipes. If you would prefer to have the insert/AKA extension a separate part, you may choose so in the check out process.
-
This listing covers model years 1961, 1962, 1963, and 1964 Chevy Impala, Bel Air, Biscayne, and Super Sport's stock with the V8 283ci, 327ci (small or big block), 348ci (small or big block), and 409ci (big block) with the a stock dual exhaust (which was stock w/2 resonators). Photo depicts the system for MY's 1960-64 Chevy full size stock with the small block 283ci or 327ci.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators, and LS/RS rear tailpipes.
- Big Block engines will have an additional $40.00 cost added to system price.
- Our pattern exhaust pipes have the piece that some call an extension (we call it an insert) incorporated into the exhaust pipes. If you would prefer to have the insert/AKA extension a separate part, you may choose so in the check out process.
-
This listing covers model years 1959 and 1960 Bel Air, Biscayne, and Impala's with the stock V8 283ci, 348ci or 348HP and a dual exhaust with 2 mufflers and 2 resonators. Photo depicts the stock dual exhaust system for 1960 9Passenger SW's with the stock non-HO 348ci.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators, and LS/RS rear tailpipes.
- Systems for the 283ci or 348ci engines require a 3 bolt formed flange, starts out at 2" and reduces to 1 and 7/8" at the muffler outlet. Systems for the 348HP engine require a 3 bolt flat flange, starts out at 2½" and reduces down to 2" at the muffler outlet. The will be an additional cost of $40.00 charged at the check out process for the 348HP systems.
- Our pattern exhaust pipes have the piece that some call an extension (we call an insert) incorporated into the exhaust pipes. If you would prefer to have this insert/AKA extension a separate part, you may choose so in the check out process.
-
This listing covers model years 1959 and 1960 Chevy Full Size Bel Air, Biscayne and Impala with the stock dual exhaust but with the stock resonators eliminated. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators eliminated, and LS/RS rear tailpipes.
- Systems for the 283ci or 348ci engines require a 3 bolt formed flange, starts out at 2" and reduces to 1 and 7/8" at the muffler outlet. Systems for the 348HP engine require a 3 bolt flat flange, starts out at 2½" and reduces down to 2" at the muffler outlet. The will be an additional cost of $40.00 charged at the check out process for the 348HP systems.
- Our pattern exhaust pipes have the piece that some call an extension (we call an insert) incorporated into the exhaust pipes. If you would prefer to have this insert/AKA extension a separate part, you may choose so in the check out process.
-
- This dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS front tailpipes & LS/RS rear tailpipes (tailpipes were 1 pc. from the factory but are so long that we must use 2 pc. of tubing to reproduce).
- This system requires 4 gaskets.
-
Photo is correct to the listing. If you aren't concerned about staying true to the stock system and would like to eliminate the cross-over pipe & Y pipes or if you have late model motor mounts; refer to 588605.- This listing is for the original stock design with the early model motor mount and consists of LS/RS crossover pipes, LS/RS Y pipes, LS/RS mufflers and LS/RS tailpipes.
- It has been brought to our attention that vehicles using the late model motor mounts will have fitment issues with the cross-over pipes and we suggest that you order the alternative design or be prepared to make modifications.
-
This alternative design dual exhaust system is a Waldron's Exhaust exclusive and eliminates the crossover pipes and Y pipes. For the true stock exhaust. refer to 588606. Photo depicts the alternative exhaust system for a 1957 Chevrolet convertible.- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, and 1964 Bel Air, Impala, Biscayne, Delray, Nomad, 150 and 210's with a V8 and stock single exhaust.
- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1955 and 1956 Bel Air's 265ci V8 and stock dual exhaust. Photos depicts the system for a 1955 BelAir convertible with the stock 265ci V8.- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936,1937, 1938, 1939, 1940, 1941, 1942, 1946, 1947, and 1948 Chevrolet's with the stock 6 cyl. Photos depicts the system for a 1939 Chevrolet Master 4 dr.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- The last 15" of the tailpipe on 1946-48 models will be flatten to an oval shape.
-
This listing covers model years 1986, 1987, 1988, 1989, 1990, and 1991 Eldorado's. Excludes the Sport Exhaust which has tailpipes. Photo depicts the stock cat-back single exhaust for 1988-89 Eldorado's.- Cat-back single exhaust system consists of rear exhaust pipe, connector pipe, single in/out transverse muffler, tailpipe. If front exhaust, center exhaust and/or converter are needed, please call for pricing and availability.
-
This listing covers model years 1986, 1987, 1988, and 1989 Seville's. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Cat-back system consists of rear exhaust pipe, connector pipe, muffler and tailpipe. If crossover pipe, Y pipe and/or converter are needed, please call for pricing and availability.
-
This listing covers model years 1980, 1981, 1982, 1983, 1984, and 1985 Seville's. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Cat back system consists of rear exhaust pipe, front muffler, connector pipe, rear muffler, and tailpipe. If LS/RS front exhaust pipe, Y pipe or converter is needed, please call for pricing and availability.
-
This listing covers model years 1979, 1980, 1981, 1982, 1983, 1984, and 1985 Eldorado's with a diesel engine. Diesel system does not require a converter. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- System consists of front exhaust pipe, center exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler with tailpipe. Y pipe NORS.
-
This listing covers model years 1978, 1979, 1980, 1981, 1982, 1983, 1984, and 1985 Seville's with a diesel engine. Diesel system does not require catalytic converter. Photo depicts the stock single exhaust system for 1978-79 Cadillac Seville's with the stock 350N diesel engine.- For MY's 1978-79 this single exhaust system consists of the front exhaust pipe, rear exhaust pipe, resonator, connector pipe, single in/single out transverse muffler with tailpipe.
- For MY's 1980-85 this single exhaust consists of LS/RS front exhaust pipes, center exhaust pipe (AKA Y pipe), rear exhaust pipe, front muffler, connector pipe, rear muffler w/tailspout. Y will be NORS.
-
This listing covers model years 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, and 1985 Eldorado's. Photo depicts the cat-back system for 1975-78 Fleetwood Eldorado's.- Cat-back system consists of rear exhaust pipe, front muffler, connector pipe, rear muffler and short tailpipe. If converter and/or pipes off the manifold are needed, please give us a call for pricing and availability.
-
This listing covers model years 1975, 1976, 1977, 1978, and 1979 Seville's stock with single exhaust. Excludes diesel engines. Photos depicts the cat-back system for a 1976 Seville.
- This single cat-back system consists of rear exhaust pipe, front muffler, connector pipe, rear muffler and tailpipe. LS/RS front exhaust pipes & converter not included. For availability and pricing, please give us a call.
-
This listing covers model years 1971, 1972, 1973, and 1974 Fleetwood Eldorado's stock with a single exhaust. Photo depicted is correct to the listing.- System consists of LS/RS front exhaust pipes, rear exhaust (Y) pipe, front muffler, connector pipe, rear muffler and 1 short tailpipe.
-
This listing covers model years 1967, 1968, 1969, and 1970 Eldorado's with a stock dual exhaust. Photo depicts the system for 1970 Eldorado's- Dual exhaust system consists of LS/RS front, LS/RS rear exhaust pipes, dual in/single out transverse muffler, and LS exit tailpipe with resonator.
-
This listing covers model years 1986, 1987, 1988, 1989, 1990, 1991, 1992, and 1993 Deville's and Fleetwood Brougham's with V8 and single exhaust. Photo depicts the stock cat-back single exhaust for 1993 Fleetwood Broughams with the stock 5.7L with all parts being NORS.- Single exhaust cat-back system consists of rear exhaust pipe, muffler, connector pipe, resonator and tailpipe.
- All or some parts may be NORS.