Shop

  • This listing covers model years 1965, 1966,  and early 1967 Chevy II and Nova's that were stock with a dual exhaust with 2 mufflers and 2 resonators. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Dual exhaust system consist of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes with 3½" round resonators. For the stock oval resonator, contact John Piccola at mrchevyii@aol.com.
    • Select your desired tailpipe exit in the check out process.
     
  • This listing covers 1965 and 1966 Chevelle, Malibu, and El Camino's with the stock V8 327ci. This single exhaust system was stock with muffler and resonator.
    • Single exhaust system consists of front and rear exhaust pipes (2 pc. Y pipe), muffler, and tailpipe with resonator. Y Pipes are NORS only.
     
  • This listing covers model years 1965, 1966, 1967, 1968, and 1969 Chevelle, Malibu and El Camino's V8 dual exhaust stock with 2 mufflers and 2 resonators. Excludes the 396ci High Performance since these system are stock without resonators. For that listing, refer to 588642.
    • Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tail pipes with bullet style (only) resonators.
     
  • This listing covers MY's 1971 and 1972 Chevrolet station wagon's and El Camino's stock with the 400ci or 454ci V8. Photo is correct to the listing. 
    • Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipe, dual in/dual out transverse muffler, and LS/RS tail pipes.
  • This dual exhaust system is for 1973 and 1974 Chevelle station wagons. Photo depicted is correct to the listing. 
    • This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
    • Dual cat-back system starts behind the catalytic converter and consists of the Y pipe, LS/RS mufflers, and LS/RS tailpipes. Y pipe may be NORS. 
       
  • This listing covers model years 1975, 1976, and 1977 Chevelle, Malibu, El Camino and Monte Carlo's with a stock 6 cyl or V8 and starts after the catalytic converter. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • This cat-back system consists of the rear exhaust pipe, muffler, and tailpipe. If exhaust pipe (Y pipe for a V8) and catalytic converter are needed, please call us for pricing and availability.
     
  • This listing covers model years 1979, 1980, 1981, 1982, 1983, and 1984 Malibu, El Camino, and Monte Carlo's with a 6 cyl or V8 and starts after the converter for the single exhaust stock with 2 tailpipes.
    • Single Cat-back system consists of the rear exhaust pipe, muffler, and LS/RS tailpipes. If pipes forward of the the converter and/or the converter are needed please contact us for pricing and availability.
  • This listing covers model years 1983, 1984, 1985, 1986, 1987, and 1988 Monte Carlo SS  with the 5.0L (1983 MY 307-7 and a 305-G for the remainder of the model years).
    • This dual cat-back system consists of the Y pipe, LS/RS mufflers and LS/RS tailpipes. Y pipe is NORS. 
     
    • This single cat-back exhaust system consist of the rear exhaust pipe, muffler and tailpipe. If parts forward of this cat-back system are needed, please contact us for price and availability.
     
  • This listing covers model years 1982, 1983, and 1984 Z28's with the stock 305ci.
    • Unique cat-back exhaust system begins behind the catalytic converter and includes Y pipe, small H pipe, LS/RS mufflers, and LS/RS tailpipes. Y pipe will be NORS. If parts forward of this cat-back system are needed, please contact us for price and availability.
     
  • This listing covers MY's 1982, 1983, 1984, & 1985 Chevy Camaro's with the stock 6 cyl.
    • Single cat-back consists of rear exhaust pipe, single in/single out transverse muffler, and tailpipe. If parts forward of this cat-back system are needed, please contact us for price and availability.
  • This listing covers model years 1985, 1986, 1987, 1988, and 1989 Camaro's stock with the 6 cyl and 2 tailpipes. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Single cat-back consists of the rear exhaust pipe, single in/dual out transverse muffler, and LS/RS tailpipes. If parts forward of this cat-back system are needed, please contact us for price and availability.
     
  • Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • This single cat-back system consist of the rear exhaust pipe, single in/dual out transverse muffler and LS/RS tailpipes. If parts forward of this cat-back system are needed, please contact us for price and availability.
  • This listing covers model years 1985 and 1986 Bel Air, Impala, and Caprice's with a stock 454ci and dual exhaust with 2 mufflers and 2 resonators.
    • Dual cat-back consists of the rear Y pipe, LS/RS mufflers, LS/RS connector pipes, LS/RS resonators, and tailpipe. Y pipe will be NORS. If parts forward of this cat-back system are needed, please contact us for price and availability.
     
  • This listing covers model years 1975 and 1976 Bel Air, Impala, and Caprice's stock with the 350ci and a 2bbl carburetor. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Single cat-back system consists of the rear exhaust pipe, muffler, and tailpipe. If parts forward of this cat-back system are needed, please contact us for price and availability.
  • This listing covers model years 1975 and 1976 Bel Air, Impala, and Caprice's with stock 350ci or 400ci and a 4 bbl carburetor. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Single cat-back consists of the rear exhaust pipe, muffler, over-axle pipe, and resonator with tailpipe. If parts forward of this cat-back system are needed, please contact us for price and availability.
  • This listing covers model years 1977, 1978, and 1979 Bel Air, Impala, and Caprice's stock with a 6 cyl or a V8. Photo depict the cat-back system for MY's 1977-79 Full Size Chevy's with the stock 305ci V8. 
    • Single cat-back system consists of the rear exhaust pipe, muffler, and tailpipe. If parts forward of this cat-back system are needed, please contact us for price and availability.
  • This listing covers model years 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, and 1989 Bel Air, Impala, and Caprice's with 6 cyl or V8 with 1 muffler and starts behind the converter. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Single cat-back exhaust system consists of the rear exhaust pipe, muffler, and tailpipe. If parts forward of this cat-back system are needed, please contact us for price and availability.
  • This listing covers model years 1982, 1983, 1984, 1985, 1985, 1987, 1988, and 1989 Bel Air, Impala, and Caprice's with the stock V8 single exhaust with muffler and resonator and starts behind the converter.
    • Single cat-back system consists of the center exhaust pipe, rear exhaust pipe, front muffler, over-axle pipe, rear muffler, and tailpipe. If parts forward of this cat-back system are needed, please contact us for price and availability.
     
  • This listing covers model years 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Camaro's with the stock V8. This is not a stock set up and OEM hangers will not fit. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • This alternative dual exhaust eliminates the transverse muffler and replaces resonators with mufflers; consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
  • Listing covers MY's 1931, 1932, and 1933 Chrysler Imperial's with the stock 8 cyl. Photo depicts the system for a 1933 Imperial CQ 
    • This single exhaust consists of exhaust pipe, muffler, connector pipe (trim to fit), resonator, and tailpipe.
    • The exhaust pipe will come with a universal flange. If you have the original cast iron flange, we will need you to send it to us in advance so that we may use it on your reproduction exhaust pipe.
    • Waldron's Exhaust will ask for photos of your original exhaust pipe. 
  • This listing covers model years 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, and 1950 Chrysler. This listing excludes Imperial.  See listing 598680 for 1942-49 with 2 mufflers. Photos depicts the system for a 1941 Town and County 9 passenger SW.
    • Single exhaust system included exhaust pipe, muffler and tailpipe.
  • This listing covers model years 1942, 1943, 1944, 1945, 1946, 1947, and 1948 New Yorker and Saratoga's convertibles with the 8 cyl and stock with 2 mufflers. All other body styles were stock with 1 muffler. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, front muffler, rear muffler, and tailpipe.

Title

Go to Top