-
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
- Ford Fairlane & Torino: 1971: Cobra Hardtop w/351 Eng., Sedan, Hardtop & Convertible w/Std Trans., all GT Hardtop & Conv., Cobra Hardtop w/429 Eng. 1970: 429 Std. Eng. w/ Std. Trans., after 11/10/69, Exc. GT Hardtop, Conv., Cobra Hardtop, S.W., Ranchero, GT Hardtop, Conv., Cobra Hartop 429 Std. Eng., Dual L&R, 429 Cobra Jet Super Cobra Jet engine, Exc. Ranchero - Dual L&R 1969: 428 Eng. Exc. Ranchero, Dual L&R 1966: 6&8 Cyl. Single & Dual Exhaust, Exc. S.W.
- Ford Falcon: 1967-70 6 Cyl., 8 Cyl before 1/1/70, Exc. S.W.
- Mercury Comet & Montego: 1971: Cyclone, 351, 429, Exc. GT 1970: 429 Std. Eng. W/Std. Trans., after 11/10/69, Dual L&R, Exc. Cyclone Hardtop, S.W., Cyclone Hardtop 429 Std. Eng., Dual L&R, 429 Cobra Jet, Super Cobra Jet Engs., Dual L&R 1969: 428 Eng., Dual L&R 1966: 6&8 Cyl. Single & Dual Exhaust, Exc. S.W.
- This OE tailpipe hanger gets attached to the trunk and will come with a trunk support plate (not shown in photo).
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Use this listing to build your own custom oval muffler. You tell us what you need and we will get it built for you. There will be no returns on custom built mufflers so be sure you triple check your measurements.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Inlet & outlet nipples cannot be any longer than 7"
- Regarding 4" round mufflers with an offset in/offset out position; the nipples cannot be any larger than 1½"ID
- Regarding 4" round mufflers with a center in/center out position: the nipples cannot be any larger than 2¼"ID
-
This chrome turndown tip is cut parallel to the ground and is approximately 9" in length. Designed to fit over your tailpipe and weld in place. Available in 1½"ID, 1¾" ID, 2" ID & 2¼" ID for $20.00 (per), 2½" ID for $30.00 (per), and 3" ID for $50.00 (per). Tips generally will ship within 1 wk. -
These chrome Pencil Tips are designed to be welded on and are approximately 9" in length. They are available in 1½" ID, 1¾" ID, 2" ID, 2¼" ID & 2½"ID for $15.00 (per). Available with 3" for $30.00 (per). Tips generally will ship within 1 wk. -
These chrome tip run straight out with a 45 degree angle cut and designed to slip over your tail pipe and be welded in place. Tips are approximately 9" in length. Available in 1½"ID, 1¾" ID, 2" ID, & 2¼" ID for $15.00 (per). Available in 2½"ID for $20.00 (per). Tips generally will ship within 1 wk. -
AFTERMARKET NOS PARTS FROM WALDRON'S EXHAUST; These are components that we have acquired over the years. The parts were manufactured by Walker, Maremont, International Parts Corp (IPC), Arvin or other exhaust component manufacturers as service replacement parts for OEM components. They will be cleaned to remove any surface corrosion and coated with a corrosion-resistant coating unless you ask us to leave them untreated. This Y pipe fits Chevrolet Full Size V8; 1968 w/396ci, 1969 w/396ci & 427ci, 1970 w/454ci. This part will generally ship within 1 wk. -
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Simply fill out the form below to let us know exactly what mufflers specifications are needed for your application.
-
This listing covers 1994, 1995 & 1996 Chevy Caprice Sedan's, Classic Wagon's, Impala SS' & Police Car with the stock 5.7L 350 V8 and starts behind the converters. If the converters are needed, please call us at 1-800-503-9428 for availability and pricing. Photo is correct to this listing.- This cat-back dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with tailspout.
-
This listing covers 1994,1995 & 1996 Cadillac Fleetwood Brougham's with the stock 5.7L 350 V8 including Commercial Chassis and starts behind the converters. If the converters are needed, please call us at 1-800-503-9428 for availability and pricing. Photo is correct to the listing.
- This cat-back dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with tailspout.
-
This listing covers 1994, 1995 & 1996 Chevy Caprice Sedan's, Classic Wagon's, Impala SS' & Police Car with the stock 5.7L 350P V8 and starts behind the converters. If the converters are needed, please call us at 1-800-503-9428 for availability and pricing. Photo is correct to this listing.
- This cat-back dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with tailspout.
-
This listing covers model years 1989, 1990, 1991, 1992, and 1993 Town Car's with the stock engine and dual exhaust with 2 mufflers.- MY 1989 has LS/RS catalytic converters, MY's 1990-93 have LS/RS converters that are connected. This dual exhaust system starts behind the cats and consist of the H pipe, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
-
This listing is for 1988 Mercury Cougars stock with the 302ci. Photo depicted is correct to the listing.- This single-into-dual exhaust system starts behind the converter. This consists of the NORS Y pipe (sits like a wishbone), LS/RS mufflers, and LS/RS tailpipes.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material. -
This listing covers model years 1986, 1987, 1988, 1989, 1990, 1991, 1992, and 1993 Deville's and Fleetwood Brougham's with V8 and single exhaust. Photo depicts the stock cat-back single exhaust for 1993 Fleetwood Broughams with the stock 5.7L with all parts being NORS.- Single exhaust cat-back system consists of rear exhaust pipe, muffler, connector pipe, resonator and tailpipe.
- All or some parts may be NORS.
-
This listing covers model years 1986, 1987, 1988, 1989, 1990, and 1991 Eldorado's. Excludes the Sport Exhaust which has tailpipes. Photo depicts the stock cat-back single exhaust for 1988-89 Eldorado's.- Cat-back single exhaust system consists of rear exhaust pipe, connector pipe, single in/out transverse muffler, tailpipe. If front exhaust, center exhaust and/or converter are needed, please call for pricing and availability.
-
This listing covers model years 1986, 1987, 1988, and 1989 Toronado's except the Toronado Trofeo.
- Single cat-back exhaust consists of the center exhaust pipe, rear exhaust pipe, single in/single out transverse muffler and tailpipe. If the converter and/or pipes forward of cat are needed please contact us for pricing and availability.
-
This listing covers model years 1986, 1987, 1988, and 1989 Delta 88's and 98 Royale's with the stock V8 and single exhaust with no resonator.
- Single cat-back exhaust consists of the center exhaust pipe, rear exhaust pipe, muffler, and tailpipe. If the converter and/or pipes forward of cat are needed please contact us for pricing and availability.
-
This listing covers model years 1986, 1987, 1988, and 1989 Seville's. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Cat-back system consists of rear exhaust pipe, connector pipe, muffler and tailpipe. If crossover pipe, Y pipe and/or converter are needed, please call for pricing and availability.
-
Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- This single cat-back system consist of the rear exhaust pipe, single in/dual out transverse muffler and LS/RS tailpipes. If parts forward of this cat-back system are needed, please contact us for price and availability.
-
This listing covers model years 1985, 1986, 1987, 1988, and 1989 Camaro's stock with the 6 cyl and 2 tailpipes. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Single cat-back consists of the rear exhaust pipe, single in/dual out transverse muffler, and LS/RS tailpipes. If parts forward of this cat-back system are needed, please contact us for price and availability.
Questions? Call Us Today! (269) 467-7185 or (800) 503-9428
