Shop

  • This listing covers model years 1965, 1966, 1967, and 1968 full size Dodge's with a V8 and a stock single exhaust with muffler and resonator. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, over-axle pipe and resonator OR Y pipe, rear exhaust pipe, muffler, and tailpipe with resonator built into it. Y pipe may be NORS.
  • This listing covers model years 1965, 1966, 1967, and 1968 Coronet, Charger, Polara, Custom 880, Super Bee, and Monaco's that were stock with a 1 muffler single exhaust.
    • Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
  • This listing covers model years 1965, 1966, and 1967 Barracuda's with the stock 273ci and 4bbl carburetor. Due to our manufacture loosing our pattern for the special tip, our last shipment of this part was not up to our standards and this listing no longer includes the special resonator. If you would like to see what we can offer regarding this resonator, please refer to SKU Arvin1212.  Photo depicts the stock single exhaust for 1965-66 Barracuda's with the stock 273ci & 4bbl. 
    • Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, over-axle pipe, and resonator eliminator pipe (integral resonator with rectangular polished stainless steel outlet has been eliminated).
    • Waldron's Exhaust does not offer over-sizing on this system. Y pipe starts off the manifolds at 1&7/8"OD and increases to 2½"OD where the Y pipe comes together, rear exhaust pipe is 2½"OD and reduces to 2¼"going into the muffler and stays 2¼" through remainder of system. 
  • At this time, we are not offering the stock resonator that completes the true stock single exhaust system for 1965-67 Barracuda's / Darts stock with the 273ci & 4bbl carb. Our former supplier lost our original tip that was previously used to provide the OE look on this resonator and our last shipment of these resonators was less then top notch work. These resonators (shown in photo) are being sold "as is". Photos shows the resonator with the protection film still covering the stainless steel tip.
    • The stock resonator was 4½" in diameter. These resonator are 4" in diameter with the inlet of 2¼" ID.
    This part will generally ship within 1 wk.   
  • This listing covers MY's 1965, 1966, and 1967 Chevy II and Nova's with a stock 283ci or 327ci V8 and stock dual exhaust w/2 mufflers. For some models this is a resonator delete option. Photo depicts the system for 1965-67 Nova's and Chevy II's with the stock V8 and tailpipes exiting out behind the rear wheels . 
    • Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipe.
    • 1965-66 with 327 V8. 1966 with 283 V8. 1967 with 327 V8. Please specify early or late model year for 1967 Chevy ll.
    • Select your desired tailpipe exit in the ordering process.
  • Listing covers model years 1965, 1966, and 1967 Mustang's with the stock V8 and single exhaust. Photo depicts the system for MY's 1965-66 Mustang's stock with a V8 and a single exhaust. 
    • Single exhaust consists of the Y pipe, rear exhaust pipe with resonator, single in/single out (same end cap) transverse muffler, and tailpipe.
  • This listing covers MY's 1965, 1966 and 1967 Mustangs stock with a 6 cyl. In 1967 the Mustang stock with the 200ci 6cyl engine was also offered stock with a resonator. If you would like that system, refer to listing 518738. Photo depicts the stock single exhaust for 1965-66 Ford Mustang with the stock 170ci or 200ci 6cyl. 
    • Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1965, 1966 and 1967 Chevelle, Malibu, and El Camino's stock with the 327ci and single exhaust. For model year's 1965 and 1966 this listing eliminates the stock resonator. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Single exhaust consist of front and rear (makes up 2 pc. Y pipe) exhaust pipes, muffler, and tailpipe. Y pipe will be NORS.
     
  • This listing covers model years 1965, 1966, and 1967 Bel Air, Impala, Biscayne, Super Sport, and Caprice's with the stock V8. MY 1967; this is OE correct for all engines. MY's 65-66; this is OE correct for the 283ci and a resonator eliminator option for the 327ci & 396ci (which were stock with resonator). Photo depicts the stock single exhaust system for 1965-66 Chevy Full Size with the stock 283ci V8 (stock without a resonator). 
    • Single exhaust system consists of the Y pipe, muffler, and tailpipe. Y pipe may be NORS.
    • For MY's 1965-67 stock with the 283ci; we will need you to report the desired tailpipe exit in the check out process. 
     
  • This listing covers model years 1965, 1966, and 1967 Cadillac Calais, Deville, Fleetwood, and Commercial Chassis with V8 and single exhausts. Photo depicts the system a 1966 Cadillac. The rear exhaust pipe varies between models. 
    • Single exhaust system contains front (Y) exhaust pipe, center exhaust pipe w/ long *resonator, rear exhaust pipe, muffler and tailpipe.
  • This listing is for 1965 and 1966 Mustangs stock with the 4 muffler dual exhaust. This listing is not for K Code Mustangs that were stock with the Arvinode dual exhaust or for A Codes that would like to have the Arvinode dual exhaust. For the Arvinode dual exhaust set up please refer to listing 518737. Photo depicted is correct to the listing. 
    • This dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS over-axle pipes, LS/RS resonators and LS/RS tailspouts.
  • The Mustang Arvinode hanger kit includes the 4 OEM style hangers, 4 Ford clamps, and 2 clamps used at the resonator. Hangers generally will ship within 1 wk. 

Title

Go to Top