- This dual exhaust in unique and consists of the H pipe, LS/RS rear exhaust pipe, LS/RS mufflers, LS/RS tailpipes, and transverse resonator.
-
Photo depicted is correct to the listing. -
This listing covers model years 1966, 1967, 1968, 1969, 1970, and 1971 Fairlane & Torino's, 1970-71 Ranchero's with the stock V8 and stock dual exhaust. Excludes 1966-69 Ranchero's & SW's which were stock with a single exhaust only. For 1967 Fairlane & Torino models, this is a resonator eliminator option. For the stock set up, refer 518765. Photo depicts the system for a 1970 Torino SCJ- Dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
- Single exhaust system consists of the Y pipe, rear exhaust pipe, front muffler, over-axle pipe, and transverse muffler with tailpipe.
-
This listing covers model years 1963, 1964, & 1965 Fairlane A codes and K codes with the stock V8. Photo depicted is correct to the listing however H pipes vary between engines.- This dual exhaust system consists of the H pipe, LS/RS muffler assembly's, and LS/RS resonator with turndowns.
-
This listing covers model years 1962, 1963, 1964, and 1965 Fairlane's stock with the V8 and single exhaust. If your 1963 or 1964 Fairlane was stock with a 4bbl carburetor, refer to SKU 518897. Photo is correct to the listing & reflects a system where the customer opted to save on shipping and had the rear exhaust pipe cut. Parts vary between MY's, engine, and carburetor set up.- Single exhaust system consists of the Y pipe, rear exhaust pipe, and muffler with turndown. Y pipe may be NORS.
- MY 1962 with the 221ci will need to report whether the system was stock at 1¾" (Y pipe is flared to 2" at the manifold and runs 1¾" throughout) or 2" (throughout) in the check out process. 1963-65 models are all 2" throughout.
- MY 1963 will need to report Early or Late model; early MY '63 took a muffler with a 25" body length while the late model year system took a muffler with a 27" body length.
-
This listing covers model years 1962, 1963, 1964, 1965 and 1964 Fairlane's stock with a 6 cyl and single exhaust. Photo depicts the system for MY's 1963-65 Fairlane's with the stock 6 cyl.- 1962-65 models consist of the front exhaust pipe, rear exhaust pipe, and muffler w/tailpipe.
- 1966 models consist of the front exhaust pipe, rear exhaust pipe, and transverse muffler w/tailpipe.
-
This listing covers 1975 & 1976 Mustang's stock with a V6 171ci or a V8 302ci and were stock with catalytic converters.
- The V6 171ci dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. H pipe will be NORS.
- The V8 302 dual exhaust consists of the LS front exhaust pipe (AKA extension pipe), H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. H pipe will be NORS.
- This set up does not eliminate the converters and they must be in place. Waldron's Exhaust cannot help with replacement converters.
-
This listing covers MY's 1974 Mustang's with the stock V6 171ci and 1975 Mustang's stock with the V8 302ci that were stock without catalytic converters. Photo depicts the system for a 1974 Mustang with the stock V6 171ci.- 1974 system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. You will need to report whether there is a 6¾" or 8" ring gear on the rear axle in the check out process.
- 1975 system consists of the LS exhaust (aka extension pipe), H pipe, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS over-axle pipes, and dual in/dual out muffler with tailpipes. H pipe which will be NORS. You will need to report the build date of your 1975 Mustang in the check out process.
-
Photo depicts the stock single exhaust (minus the needed converter) for 1977-78 Mustangs stock with the 302ci V8 & a 12" catalytic converter.- Single cat-back consists of the rear exhaust pipe, resonator, over-axle pipe, muffler, and tailpipe.
- If the Y pipe (AKA front exhaust pipe) is needed, you may add it to your order in the check out process. You will be asked to confirm whether needed or not.
- If you are in need of the catalytic converter, please give us a call at 1-800-503-9428.
-
Photos depicts the stock cat-back single exhaust for 1976 Mustang II's with the stock 302ci V8.- Single cat-back exhaust consists of the Y pipe, front muffler, over-axle pipe, rear muffler, and tailpipe.
- Y pipe may be NORS
- The LS/RS catalytic converter-pipe assembly's are not available .
-
This listing covers MY's 1975 & 1976 Mustang's with the stock 302ci V8 and starts behind the converters.
- Single cat-back exhaust starts with at the Y pipe and consists of the Y pipe, resonator, over-axle pipe, muffler, and tailpipe. If front exhaust pipes with converters are needed, please contact us for pricing and availability.
-
- Single cat-back exhaust system consists of the rear exhaust pipe, front muffler, over-axle pipe, rear muffler and tailpipe. If Y pipe and/or catalytic converter are needed, please give us a call for price and availability.