Shop

  • This listing covers model years 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 Ford F1, F2, F3, F4, F5 and F6's stock with the V8 and single exhaust. Photo depicts the crossover pipe and Y pipe for 1942-52 F1, F2, & F3's with V8, the muffler and tailpipes vary.
    • Single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe.
  • This listing covers model years 1975, 1976, 1977, and 1978 Mark IV and Mark V's. Photo depicts the dual cat-back system for a 1978 Mark V stock with converters on both manifolds. This photo was taken long ago and shows the resonator inlet pipe as a separate pc. We now have patterns for the LS/RS resonators and that pipe is now an integral part of the resonators.  
    • Dual cat-back exhaust system consists of the H pipe (2 pc.), LS/RS mufflers, LS/RS  connector pipes, and LS/RS resonators with tailpipe. Please be certain to specify if your Mark is stock with 1 or 2 cats during the check our process.
  • This listing covers model years 1958, 1959, 1960, 1961, 1962, and 1963 Thunderbird's with the stock V8 and dual exhaust with 2 mufflers. This listing is the stock set up for 1962 Thunderbird's with a 6 bbl carburetor. For the stock set up 1962 Thunderbird's stock with a 4 bbl carburetor and for MY 1961 refer to 518725. If you have a 1961 and want to eliminate the resonator, this is the listing to be used.  Photo depicts the dual exhaust system for 1963 Ford Thunderbirds with the stock V8 
    • Dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, and LS/RS mufflers with tailpipes.
    • MY 1963 will be asked to report the type of gasket needed (flat or donut) in the check out process.
     
  • This listing covers model years 1955, 1956, 1957, 1958, and 1959 Ford V8's stock with a dual exhaust. Excludes 1957-59 Convertibles & Retractable Hard Tops, for these systems refer to SKU: 518710. Photo depicts the system for MY's 1955-56 Ford Sunliner convertibles with the stock V8.
    • For 1955-56 MY's this dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
    • For 1957 S.W.'s, Ranchero's & Sedan Deliveries this dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. For all other body styles, this dual exhaust will consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes.
    • For 1958 & 1959 MY's this dual exhaust will consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes.
  • This listing covers model years 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, and 1985 Eldorado's. Photo depicts the cat-back system for 1975-78  Fleetwood Eldorado's.
    • Cat-back system consists of rear exhaust pipe, front muffler, connector pipe, rear muffler and short tailpipe. If converter and/or pipes off the manifold are needed, please give us a call for pricing and availability. 
     
  • This listing covers model years 1952, 1953, 1954, 1955, and 1956 Cadillac's (all series and all body styles) with stock dual exhaust with 4 mufflers. Photo depicts the system for 1952-53 Cadillac coupes and convertibles.
    • Dual exhaust system includes - LS/RS exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, LS/RS rear mufflers, LS/RS tailpipes. Tailpipes will fit into the factory tips located in the bumper. These tips are not part of the package.
    • For Series 75 and Commercial Chassis, this will not be a direct fit. We do not have all the patterns needed (in these model years) for Commercial Chassis or Series 75. If you have a 1952-56 Series 75 or Commercial Chassis we will supply you with a couple pieces of straight tubing. You will then need to modify the system to fit.
    • If you have original pipes still on your 1952-56 Cadillac Series 75 or Commercial Chassis, please give us a call at 800-503-9428.
  • This listing covers model years 1957 and 1958 full size Buick's with dual exhaust. Photo depicts the system for a 1958 Buick Roadmaster. 
    • This system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with short tailpipes. This system is a metal-to-metal connection at the manifold and no gaskets are required.
     
  • This listing covers model year 1956 Buick (only). Photos depicts the system for a 1956 Buick Special's & Century's 
    • The dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. This is a metal to metal connection and does not require any gaskets. It is also flanged through out, so you will only need clamps to use in conjunction with any universal hangers you may order. 
  • This listing cover model years 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, and 1959 Chevy trucks with the stock 6 cyl. Photo depicts the system for MY's 1950-55 (MY 1955 1st Series) Chevy 3100 with the stock 6 cyl. 
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
    • Please specify the vehicle series through the checkout process.
  • This listing covers model years 1948, 1949, 1950, 1951, and 1952 Ford ½T, ¾T & 1T trucks with the stock flathead V8. Convert your flathead Ford to dual's with Waldron's exclusive Dual Conversion kits! Complete kits bolt on to the original manifolds. Photo depicts the dual conversion for 1948-52 Ford F1 with the stock V8
    • Dual conversion kit consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS  glasspacks, LS/RS tailpipes, gaskets, and clamps.
    • Period specific hangers are N/A. Universal hangers only. Hangers are not included in the kit but may be added to your cart.
    •  Exhaust pipes start out at 1&5/8" OD and increase to 2"OD immediately after the flange. Tail pipes are 1¾"OD.
    • If you would prefer mufflers (over glasspacks), you may make that change to your order in the check out process. 
    Lead time on this system with glasspacks generally runs 5-6 wks., with mufflers the lead time will be as posted above.  
  • This listing covers model years 1973, 1974, 1975, 1976, 1977, and 1978 Jeep Truck, Wagoneer, and Cherokee's with the stock V8. Photo depicts the stock single exhaust for 1978 Jeep Cherokee's & Wagoneer's with the stock V8 and desired side exit tailpipe (which customer opted to have tailpipe cut to reduce the shipping cost). 
    • For MY's 1973-75 this single exhaust system consists of LS exhaust pipe, Y pipe, muffler, and tailpipe. Y pipe may be NORS.
    • For MY's 1976-78 this single exhaust system consists of the Y pipe, muffler, and tailpipe. Y pipe may be NORS.
    • For MY's 1975-78 Cherokee's and/or Wagoneer's; you will be asked to report the desired tailpipe exit.
     
  • This listing covers 1972, 1973, & 1974 Commando's, Wagoneer's, J10's, J20's, CJ5 and CJ6's with the stock V8. Photo depicts a 1972-73 Jeep Commando with standard transmission.
    • Single exhaust system consists of a crossover pipe, Y pipe, muffler, and tailpipe.
    • System is a metal-to-metal connection at the manifold. No gaskets are required at 2 pc. Y pipe.
    • If you have a 1972-73 CJ5 or CJ6 you will need to report the desired tailpipe diameter. These models were stock with either 1¾" or 2" OD tailpipe.

Title

Go to Top