- Select this option for a stock 5" or 6" round muffler with a body length less than 30". The checkout process will ask questions regarding your application and muffler will be built to those specifications.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material. -
This listing covers MY's 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Mercury Montego's, Cyclone's, Cyclone GT's with their respective stock V8; 390ci 302ci, 428CJ, 351ci, 429ci, 429CJ or 429SCJ. Photo depicts the stock dual exhaust for 1969 Mercury Montego's & Cyclones with the stock 390ci.- This dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
-
This listing covers MY's 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952 1953, and 1954 Mercury's with the stock flathead V8. Convert your flathead Mercury to a dual exhaust with Waldron's Dual Conversion Kits! This dual conversion kit bolts directly to the stock manifolds (only). Conversion kit consists exhaust pipes, glasspacks, and tailpipes, along with gaskets and clamps. 1949-53 model years will also receive a blocker plate. Hangers are not included. You may opt to change your system from glasspacks to mufflers (for an additional cost) in the check out process.- 1939-41; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1 5/8".
- 1942-48; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1¾".
- 1949-53; LS front & rear exhaust pipes start out at 1½" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
- 1949-51 with rear exit DS manifold; LS exhaust pipe starts out at 1 5/8" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
-
If you have an Inline 6 cylinder engine in your 1950, 1951, 1952, 1953, 1954, or 1955 Chevy ½T, ¾T or 1T and have always wanted a dual exhaust system then this listing is for you! This system is a direct fit to your cast iron Fenton Chevy 6 cyl headers. This system does not include the cast iron Fenton headers.- This dual conversion kit consists of inboard & outboard exhaust pipes, dual in/dual out muffler and inboard/outboard tailpipes.
- During the check out process, let us know how you would like your tailpipes to exit; out the sides along the quarter panel or straight out the back.
-
This listing covers model years 1955, 1956, 1957, 1959, and 1960 Chieftain, Star Chief, Super Chief, Bonneville, Catalina, and Ventura's with the stock V8 and dual exhaust. Exclude 1958 models which were stock with mufflers and resonators. Photo depicts the dual exhaust system for MY 1957 Pontiac full size (except fuel injection). We do not have patterns for 1957 's with fuel injection.- For MY 1955 this is a dual conversion exhaust and consists of LS front, center and rear exhaust pipes, RS exhaust pipe, LS/RS mufflers, and LS/RS tailpipes.
- For MY's 1956-57 the system requires a cast iron extension pipe on the LS. If you are in need of this part, please contact Fab Craft Metal Works at 800-208-8242. This dual exhaust system consists of LS front and rear exhaust pipe, RS exhaust pipe, LS/RS mufflers and LS/RS tailpipes.
- For MY's 1959-60 this dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers MY's 1955, 1956, 1957, 1958, and 1959 Belvedere, Savoy, Plaza and Fury's with the stock V8 and dual exhaust. For MY 1958 with fuel injection, please give us a call. MY 1957-59 Convertibles & 1957 Fury's which were stock with resonators, this is a resonator eliminator option, for the stock set-up refer to 438513 Photo depicts the system for MY's 1957 and 1958 Savoy's, Belvedere's, and Plaza's (except convertibles) with the stock 318ci.- For MY's 1955-56 this dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
- For MY's 1957-59 this dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
Listing covers model years 1969, 1970, and 1971 Mark III with the stock V8 and dual exhaust. Photo depicts exhaust system for 1969-71 Lincoln Mark III.- Dual exhaust system consists of the H pipe, LS/RS mufflers, LS/RS connector pipe, and LS/RS resonator w/tailspout.
- This stock system starts out at 2¼"OD and reduces down to 1¾"OD at the muffler outlets.
-
This listing covers model years 1967 (289ci, 390ci) 1968 (428ci, 427ci, 390ci), 1969 (428ci, 429ci, 390ci, 351ci, 302ci), and 1970 (429ci only) Mustangs with their respective stock V8 and dual exhaust. For MY 1970 Mustangs with a 351ci or 428ci; refer to listing 518741. If you would prefer a dual exhaust that eliminates the transverse muffler, refer to listing 518748. Photo depicts the system for a 1969 Mach 1.- Dual exhaust system consist of the H pipe, LS/RS rear exhaust pipes with resonators, dual in/dual out transverse muffler, and LS/RS tailpipes.
- Excludes the chrome tips.
- Tell us how your would like your tailpipes to exit in the check out form below.
-
This listing covers model years 1959, 1960, 1961, 1962 4bbl, 1964, 1965, and 1966 Thunderbird's. For MY 1962 with a 6bbl and 1963 T-birds, refer to 518724. Photo depicts the system for all 1961 Ford Thunderbirds.- For 1959-63 models this dual exhaust system consists of H pipe, LS/RS rear exhaust pipes with resonators, and LS/RS mufflers w/tailspouts.
- For 1964-66 models this dual exhaust system consists of H pipe, LS/RS rear exhaust pipes with resonators, and LS/RS mufflers built into the tailpipes.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, and 1961 Dodge Coronet, Royal, Custom Royal, D500, Matador, and Polara's with a V8 and stock dual exhaust system. Excludes 1957-59 Dodge convertibles which were stock with 2 mufflers and 2 resonators. Photo depicts the dual exhaust system for 1958 Dodge's (except D500, convertibles, or station wagons) with the stock V8- For MY's 1955-56 this dual exhaust consists of LS exhaust pipe, RS front exhaust pipe, RS rear exhaust pipe, LS/RS mufflers and LS/RS tailpipes. 1956 models were stock with a Y pipe off the RS however we build it as a straight exhaust pipe.
- For MY's 1957-61 this dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
This listing covers model years 1960 & 1961 (without Ram Induction), 1962, 1963, and 1964 300's with dual exhaust and mufflers only (no resonators). If your 1960-61 Chrysler 300 was stock with Ram Induction refer to SKU 5987697. If your 1962-64 Chrysler 300 is stock with the Cross Ram engine, refer to listing 598702. Photo depicts the system for 1963-64 Chrysler 300's.- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- We received many inquiries regarding this system fitting 1963-64 New Yorker's. It will NOT due to the fact that the engine on the New Yorker's sits 1" higher to the manifold.
-
This listing covers model years 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, and 1975 New Yorker, Newport, Windsor, and 300's with stock V8 and single exhaust with 1 muffler (no resonator). This is a stock system to all 1960 models. For MY 1961-64 New Yorkers & from 1965 & up all models were stock with a resonator. Listing is a resonator eliminator option. MY 1975; this listing is for models that were not stock with a catalytic converter and eliminates the resonator. Photos depicts the system for 1965 Chrysler 300's or Newport's with the stock 383ci single exhaust with the stock resonator eliminated (except SW).- Single exhaust system consists of Y pipe, rear exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1967, 1968, 1969, 1970, 1971, 1972,, 1973, and 1974 Camaro's stock with the 6 cyl. Photo depicts the stock single exhaust for 1968 Chevy Camaro's with the stock 6cyl.- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, transverse muffler, and short tailpipe.
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Skylark, Special, Gran Sport, Century, and Regal's with a V8 and stock dual exhaust. Photos depicts the system for MY's 1970-71 Skylarks (exc. Gran Sports)- Dual System consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes. Metal-to-metal connection at the manifolds, no gaskets required.
-
This listing covers MY's 1957, 1958, 1959, 1960 ,1961, 1962/ 1963, 1964, 1965, and 1966 Chrysler Imperials. MY 1959 - we will need to know your VIN due to mid-year change. MY's 1959-61 - we will need to know type of suspension. Photo depicts the system for 1962-66 Chrysler Imperials.- Dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS mufflers, and LS/RS tailpipes.
- When installing the system for 1957 and 1958 Imperial's (except convertibles and 4 dr. hardtops) the transmission crossmember will need to be removed in order to install the resonators.
-
Waldron's Exhaust reproduces these OE correct tailpipe hangers. Hangers generally ship out within 1 wk. : Ford Fairlane & Torino For MY's 1967, 1968 & 1969 these tail pipe hangers were used on all set-ups with the LS hanger being used on all single exhaust systems. For MY 1970 stock with a single this fits all 6 cyl. systems and 302ci & 351ci V8's (only) EXCLUDES S.W., Ranchero, the 429ci Std. engine, GT Hardtops, convertibles, Cobra Hardtop & those stock with a standard transmission built after 11-10-69. For MY 1970 stock with a dual exhaust this TP hanger set EXCLUDES S.W., Ranchero's, the 429ci Std engine, GT Hardtops, convertibles, Cobra Hardtop & those stock with a standard transmission built after 11-10-69. For MY 1971 stock with a single this fits all 6 cyl. systems and 302ci & 351ci V8's (only) EXCLUDES S.W. & Ranchero w/351ci. For MY 1971 this TP hanger set EXCLUDES S.W., Ranchero & Cobra HT's w/429ci., GT Hardtop & conv., & Cobra HT. Hangers will generally ship within 1 wk. -
Waldron's Exhaust reproduces this OE correct muffler hanger. This muffler hanger was used on 1970 and 1971 Ford Torino's / Fairlane's and Mercury Montego's. All engines. Both single and dual exhaust systems. Simply order the amount needed. Hangers generally will ship within 1 wk. -
Waldron's Exhaust reproduces these OE correct muffler hangers. Hangers generally will ship within 1 wk. -
This listing is for 1955, 1956 and 1957 GMC's with the stock Pontiac V8. Photo depicts the system for 1956 GMC 100 ½T's with the stock V8 and 114"WB- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- MY 1955 will be asked to report the manifold ID during the check out process.
-
This listing covers model years 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, and 1949 International C1, D1, D2, C5, C15, D15, K1, K2, KB1, KB2, KB3's stock with the 6 cyl. Photos depicts the system for 1947, 1948 & 1949 International ½T-2T trucks.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Exhaust pipe will come with a universal flange, reuse the original cast iron flange (if possible).
-
This listing covers MY's 1972-73 CJ5, CJ6, DJ5, & DJ6, 1974-75 CJ5 & CJ6, 1976-78 CJ5 & CJ7. Photo depicts the stock single exhaust for 1972-73 CJ5's and DJ5's with the stock 232ci 6cyl. and 2" tailpipe.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- MY''s 1972-73 will need to tell us what size tailpipe your CJ was stock with in the check out process.
- MY 1975 will need to be specific about 3 or 4 speed transmission in the check out process.
- MY 1978 will need to report with or without Power Take Off in the check out process
-
This listing covers model years 1961, 1962, and 1963 Lemans and Tempest's stock with a 4 cyl engine. Photo depicts the stock single exhaust for 1962 Pontiac Lemans & Tempest with the stock 4 cyl engine and 4bbl carburetor.- Single exhaust consists of the crossover pipe, exhaust pipe, muffler, and tailpipe. Crossover pipe will be mild steel due to unique pipe diameter of 1&1/8"OD.
- Waldron's Exhaust does not have the needed gaskets available.
- 1962 and 1963 models will be asked to report the stock carburetor set-up in the check out process.
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Road Runner, Belvedere, and Satellite's with the stock 383ci, 340ci or 400ci V8 & dual exhaust. 1970-74 Plymouth Fury's refer to SKU 438521. This listing excludes 1971-74 models with the 440ci. The OE exhaust pipes for the 440ci were never reproduced in the after-market world. We can help you out with mufflers and tailpipes (only). If you have original exhaust pipe for the 440ci, contact us at 800-503-9428. The 318ci V8 was stock with a single exhaust only. Photo depicts the stock dual exhaust for 1970 Plymouth Belvedere's, Satellite's & Road Runners with the stock 383ci & 4BBl carburetor where customer selected tailpipes to exit for chrome tips.- Dual exhaust varies between model names, body styles and engines. Some systems consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes while others have LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, and 1942 Plymouth's with the stock 6 cyl engine. Photo depicts system for 1936 Plymouth Business Coupe.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.