- Complete dual cat-back exhaust system begins behind the catalytic converter and consists of the Y pipe, LS/RS mufflers, and LS/RS tailpipes. Y pipe may be NORS. If parts forward of this cat-back system are needed, please contact us for price and availability.
-
This listing covers model years 1977, 1978, 1979, 1980, and 1981 Z28's stock with a dual exhaust. Photo depicts the cat-back system for 1977-79 Z28's with the stock V8. -
Listing covers model years 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 Fords passenger cars with the stock flathead V8 with stock manifolds. This listing is not for Ford trucks. See listing 453292 for 1935-41 Ford ½T's & 453293 for 1948-52 F1-F3's dual conversion kits. Convert your flathead Ford to a dual exhaust with Waldron's Dual Conversion Kits! This dual conversion kit bolts directly to the stock manifolds (only). Conversion kit consists exhaust pipes, glasspacks, and tailpipes, along with gaskets and clamps. 1949-53 model years will also receive a blocker plate. Hangers are not included. Photos depicts the system for MY's 1949-53.- 1935-38; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the glasspacks, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1½".
- 1939-41; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the glasspacks, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1 5/8".
- 1942-48; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the glasspacks, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1¾".
- 1949-53; LS front & rear exhaust pipes start out at 1½" then bump up to 2" at the glasspacks, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
- 1949-51 with rear exit DS manifold; LS exhaust pipe starts out at 1 5/8" then bump up to 2" at the glasspacks, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
-
This listing covers model years 1965, 1966, 1967, 1968, and 1969 Mustangs with a V8 and allows owners of A Code's & some K Code's to update their Mustang's to the unique sound of the Arvinode dual exhaust. For 1965-66 K Code's this is close in appearance and sound to the stock set up. If you would like to have the stock set up for your 1965-66 K Code, which has the factory correct chamber tube tied into the muffler/resonators, please refer to listing 518737. The Base Model does not have the chamber tube that runs along the top of the muffler/resonators which gives the Concours the OEM correct look for 1965-66 K Code models. Photo depicted is correct to the listing.- The Base model Arvinode dual system starts behind the stock H pipe and includes LS/RS connector (AKA rear exhaust pipes), LS/RS wave-tuned front mufflers WITHOUT externally mounted rectangular tubes, LS/RS over-axle pipes, LS/RS resonators with turndowns or GT exit.
- These parts were welded into LS and RS assembly's from the factory and connected with clamps to the outlet end of the H pipe.
- If the H pipe is needed, add it to your cart in the check out process.
- Let us know if you need the GT exit or turndowns in the check out process.
-
- This single exhaust consists of the front exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler, and tailpipe.
-
Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Single to dual cat-back exhaust system consists of the rear Y pipe, LS/RS mufflers, LS/RS front tailpipes, and LS/RS rear tailpipes. This application did not come stock with chrome tips.
- If pipes forward of converter and/or converter are needed, please contact us for availability and pricing.
-
This cat-back listing covers model years 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, and 1992 Firebird's with either a 4, 6, or 8 cyl engine and stock with 2 tailpipes. Photo depicts the cat-back single exhaust system for 1990-92 Firebirds with the stock 189T or 191ci 6cyl. All parts shown are NORS .- For MY's 1983-84 with a 6 cyl & MY's 1983-86 with a 4 cyl; single cat-back system consists of the rear exhaust pipe, single in/dual out same side transverse muffler, and tailpipes.
- For all 8 cyls & all other MY's for the 6 & 4 cyl; single cat-back system consists of the rear exhaust pipe, single in/dual out opposing sides transverse muffler, and LS/RS tailpipes.
- Some or all parts may be NORS
-
This listing covers 1927, 1928, 1929, 1930, 1931, 1932, and 1933 Willys-Knight with the stock 6 cyl. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
Listing covers MY's 1935, 1936, 1937, 1938, 1939, 1940, and 1941 Ford ½T Trucks with the stock flathead V8. Convert your flathead Ford to dual exhaust with Waldron's exclusive Dual Conversion kits! Complete kit bolts on to the stock manifolds. Not available for 1933-34, 1942-47 or 1953 MY's.
- Dual conversion kit consists of the exhaust pipes, custom-built glasspacks, tailpipes, blocker plate, gaskets and clamps. Gaskets & steel clamps are included. After 1949, the RS exhaust requires blocking plate which will be included in the system. Universal hangers can be added to the cart, if needed. Period specific hangers are N/A.
- The system goes through existing holes in the crossmembers. LH exhaust pipe starts at 1 ½”OD and opens to 2”OD at the glasspack inlet. RH exhaust pipe 2” OD throughout. Tailpipes are either 1 5/8” or 1 ¾” depending on the material selected & MY.
- If you would prefer mufflers (over glasspacks), you may make that change to your order in the check out process. Additional cost of $115.00 for aluminized steel or $230.00 for T409 SS.
-
This listing covers model years 1948, 1949, 1950, 1951, and 1952 Ford ½T, ¾T & 1T trucks with the stock flathead V8. Convert your flathead Ford to dual's with Waldron's exclusive Dual Conversion kits! Complete kits bolt on to the original manifolds. Photo depicts the dual conversion for 1948-52 Ford F1 with the stock V8- Dual conversion kit consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS glasspacks, LS/RS tailpipes, gaskets, and clamps.
- Period specific hangers are N/A. Universal hangers only. Hangers are not included in the kit but may be added to your cart.
- Exhaust pipes start out at 1&5/8" OD and increase to 2"OD immediately after the flange. Tail pipes are 1¾"OD.
- If you would prefer mufflers (over glasspacks), you may make that change to your order in the check out process.
-
If you have an Inline 6 cylinder engine in your 1950, 1951, 1952, 1953, 1954, or 1955 Chevy ½T, ¾T or 1T and have always wanted a dual exhaust system then this listing is for you! This system is a direct fit to your cast iron Fenton Chevy 6 cyl headers. This system does not include the cast iron Fenton headers.- This dual conversion kit consists of inboard & outboard exhaust pipes, dual in/dual out muffler and inboard/outboard tailpipes.
- During the check out process, let us know how you would like your tailpipes to exit; out the sides along the quarter panel or straight out the back.
-
Convert your 1957, 1958, or 1959 Chevy ½T, ¾T, or 1T with a small block 283ci V8 to dual's with Waldron's exclusive dual conversion kits that bolt onto your original manifolds that dump straight down with 3blt connection. Photo depicts the system for MY's 1957-59 Chevy ½T's with a long wheel base and the stock 283ci.- Dual conversion kit consists of gaskets, clamps, LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS custom-built glasspacks, and LS/RS tailpipes. The 4 universal hangers are not included but can be added to your cart.
- System is 2" throughout.
-
This listing covers MY's 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952 1953, and 1954 Mercury's with the stock flathead V8. Convert your flathead Mercury to a dual exhaust with Waldron's Dual Conversion Kits! This dual conversion kit bolts directly to the stock manifolds (only). Conversion kit consists exhaust pipes, glasspacks, and tailpipes, along with gaskets and clamps. 1949-53 model years will also receive a blocker plate. Hangers are not included. You may opt to change your system from glasspacks to mufflers (for an additional cost) in the check out process.
- 1939-41; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1 5/8".
- 1942-48; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1¾".
- 1949-53; LS front & rear exhaust pipes start out at 1½" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
- 1949-51 with rear exit DS manifold; LS exhaust pipe starts out at 1 5/8" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".