- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, dual in/dual out transverse muffler, and LS/RS tailpipes.
- If the chrome split tips are desired (stock for a 1974 Ventura GTO), you may add them to your cart below.
-
This listing covers model years 1973 and 1974 Ventura's stock with the V8 and dual exhaust. Photo depicts the stock dual exhaust for 1974 Ventura GTO's with the stock V8 and stock split chrome tips. The 1973 Ventura's take the same front and rear exhaust pipes as 1974 models, the difference between the 2 model years comes at the transverse muffler and tailpipes.
-
This listing covers model years 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, and 1971 models CJ-2, CJ-2A, 2WD Trk, 4WD Trk, CJ-3A, CJ-3B, DJ-3A, DJ-3A Dispatcher, 4x4-63, 4x4-73, 4x4-75 SW, F134, 4x2-581 Maverick, C101 Jeepster, CJ-5 Universal Jeep, CJ-6 Universal Jeep, FC150, CJ-3B Universal Jeep, DJ-5, and DJ-6 Universal Jeep's with the stock 4 cylinder engine. Photo depicts the stock single exhaust system for 1950-54 Willy's Jeep PU with the stock 4 cyl.
- For some MY's this single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe while other systems consists of an exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1965,1966, 1967, 1968, 1969, 1970, 1971 and 1972 models J-162, J-164, J-262, J-264, J-362, and J-364 Gladiator's stock with the 327ci V8. Photo depicts the stock single exhaust for 1966-72 Jeep Wagoneer & Gladiators with the stock 327ci V8 except the SW & Sedan Deliveries which are stock with a longer tailpipe.
- Single exhaust system consists of a LS exhaust pipe, Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, and 1975 International trucks with the stock V8. Excludes 1966-68 C1100-1300, D1100-130, & C110-130 with 4WD. Photo depicts the system for MY's 1966-69 International trucks with the stock 304ci and 2WD (the tailpipe for this system was built in 2 sections to reduce the cost of shipping).
- This single exhaust system consists of the crossover pipe, Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
Convert your 1957, 1958, or 1959 Chevy ½T, ¾T, or 1T with a small block 283ci V8 to dual's with Waldron's exclusive dual conversion kits that bolt onto your original manifolds that dump straight down with 3blt connection. Photo depicts the system for MY's 1957-59 Chevy ½T's with a long wheel base and the stock 283ci.
- Dual conversion kit consists of gaskets, clamps, LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS custom-built glasspacks, and LS/RS tailpipes. The 4 universal hangers are not included but can be added to your cart.
- System is 2" throughout.
-
This listing covers MY's 1967, 1968, 1969, 1970, 1971, and 1972 Chevy C10, C20, and C30's with the stock small block V8 327ci, 307ci or 350ci engine and lets you convert your small block Chevy, with the stock 45° angle manifolds, to dual exhaust. Photo depicts the dual conversion system for 1971-72 Chevy C20's ¾T 2WD with the stock 350ci V8 and 127"WB with rear leaf springs.
- Dual exhaust conversion kit consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS glasspacks, and LS/RS tailpipes, along with the gaskets and clamps needed. Universal hangers are additional and can be added to your cart.
- Exhaust system is 2" throughout.
-
This listing covers MY's 1975, 1976, 1977, and 1978 Chevy C10, K10, C20, K20, C30, K30 & Suburban's with the stock 350ci, 400ci, & 454ci. For 1975-78 Suburban's with the 454ci this is a resonator eliminator option since all were stock with resonators. Photo depicts the stock dual exhaust for 1975 Chevy C10's with the stock 454ci.
- Dual exhaust system for the 2 WD C Series consists of LS/RS exhaust pipes, LS/RS mufflers, & LS/RS tailpipes.
- Dual exhaust system for the 4 WD K Series & Suburban's consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers & LS/RS tailpipes.
-
This listing covers MY's 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Mercury's with the stock flathead V8. Photo shown is the stock single exhaust for a 1937 Ford without the heat exchanger (with TP cut to reduce shipping) & is posted so that you might see the quality of our craftsmanship and the type of bending.
- For MY's 1941-48 this single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe.
- For MY's 1939-40: If your 1939-40 Mercury has the heat exchanger & you intend to reuse it; the system will consist of a cross-over pipe, exhaust pipe, muffler & tailpipe. If your 1939-40 doesn't have the heat exchanger or if it does have it but it is not reusable; the system will consist the 2 pc. Y pipe (AKA cross-over & Y pipe), muffler & tailpipe. You will be asked to report which setup you require in the check out process.
-
This listing covers MY's 1961, 1962, 1963, and 1964 Mercury Monterey's, Commuter's, Colony Park's, and Montclair's with the stock V8 292ci, 352ci, 390ci, 406ci, & 427ci. For convertibles go to see listing 453451. Photo depicts the stock dual exhaust system for 1963 Mercury Monterey's & Colony Park's with the stock 390ci V8, except for convertibles.
- System consists of the H pipe, LS/RS rear exhaust pipes, and LS/RS mufflers w/hanger bracket and tailspout welded into the proper position.
-
This listing covers MY's 1966, 1967, and 1969 Pontiac GTO, Tempest, and Lemans' stock with a dual exhaust system with mufflers and resonators. 1968 all mid-size's & 1969 GTO's with a 400ci & standard transmission were all stock with mufflers only, for the correct system refer to listing 453475 if you have a HO or Ram Air set-up or 453210 for non-HO or Ram Air. Photos depicts the system for a 1969 GTO stock w/automatic transmission.
- Dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with turndowns.
- In the check out process you will be asked to report w/ or w/o Ram Air or HO. There is an additional cost of $50.00 in aluminized steel or $100.00 in T409 for RA or HO. You will also be asked whether you have the cast iron flanges or if you need them added to your cart. If you already have the needed cast iron, you will need to send them to Waldron's in advance.
- 1966 & 1967 resonators are bullet style while 1969 resonators are cannister style.