- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear (over-axle) exhaust pipes, dual in/dual out transverse muffler, and LS/RS tailpipes. Designed to fit with the stock chrome tips which are not included with the system.
- The standard engines take a system that starts out at 2"OD on the front exhaust pipes (with 2blt flanges), then increases to 2¼"OD on the rear exhaust pipes, and reduces back to 2"OD on the tailpipes.
- The Ram Air or HO systems are 2¼"OD up to the muffler inlets and then reduces to 2"OD on the tailpipes.
- You will be asked to report with or without RA or HO manifolds along with bolt pattern needed for RA/HO systems in the check out process. There will be an additional cost of $89.00 for the Ram Air / HO systems. If you need the cast iron flanges, you may add them to your order in the check out process. If you already have the need set, you will need to mail them to us in advance (address is shown in the check out form).
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Firebird, Firebird Trans Am, and Firebird Formula's stock with the V8 (except 455ci Super Duty) and dual exhaust. Photo depicts the system for 1970-72 Firebirds (Non HO or Ram Air).
-
This listing covers model years 1973 and 1974 Ventura's stock with the V8 and dual exhaust. Photo depicts the stock dual exhaust for 1974 Ventura GTO's with the stock V8 and stock split chrome tips. The 1973 Ventura's take the same front and rear exhaust pipes as 1974 models, the difference between the 2 model years comes at the transverse muffler and tailpipes.
- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, dual in/dual out transverse muffler, and LS/RS tailpipes.
- If the chrome split tips are desired (stock for a 1974 Ventura GTO), you may add them to your cart below.
-
This listing covers model years 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Camaro's with the stock V8. This is not a stock set up and OEM hangers will not fit. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- This alternative dual exhaust eliminates the transverse muffler and replaces resonators with mufflers; consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1954, 1955, and 1956 New Yorker, 300 and Windsor's stock with a V8 and dual exhaust. Photo depicts the stock dual exhaust for 1954 New Yorker's.
- For 1954-55 model years the dual exhaust system consists of LS/RS front exhaust pipe, LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
- Model year 1956 consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
This listing covers model years 1954 Custom Imperial's, 1955, and 1956 Imperial's & Crown Imperial's stock with a V8 and dual exhaust. Photo depicts the stock dual exhaust for 1956 Chrysler Imperial's (the Crown Imperial requires different tailpipes).
- For 1954 Models; this dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- For 1955-56 Imperials; this dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- For 1955-56 Crown Imperials with longer body's; this dual exhaust system consists of LS/RS exhaust front exhaust pipes. LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS front tailpipe section & LS/RS rear tailpipe section (tailpipe was originally 1 long pc. but cannot be built full length in the aftermarket world).
- In the check out process, you will be asked to report your model. Crown Imperial aluminized steel systems will receive an additional cost of $232.50 while the T409 stainless steel systems will receive an additional cost of $467.50.
-
This listing covers model years 1975 and 1976 Coronet, Charger and Monaco's with a 360ci or 400ci and stock single exhaust with muffler and resonator. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Single exhaust consist of the Y pipe, rear exhaust pipe, muffler, connector pipe, and resonator with tailpipe while other consist of the Y pipe, muffler, connector pipe, and resonator with tailpipe.
-
This listing covers model 1960, 1961, and 1962 Dart, Phoenix, Pioneer, and Seneca stock with a dual exhaust. 1960 MY covers 361ci and 383ci engines, only. No dual's available for 1960 with a 318ci. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 GTS, Swinger, and Dart's V8 (except 273ci or 318ci) stock with a dual exhaust with 2 mufflers. Photo depicts the system for a 1968 Dart with the stock 340ci.
- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing is for all body styles 1959 Pacer, Ranger, Citation, and Corsair's with the stock V8 and dual exhaust. Photo depicts the exhaust system for 1959 Edsel's, except convertibles and station wagons.
- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes. From the factory, these tailpipes were all in 1 piece but are so long that they must be reproduced in 2 sections.