-
Waldron's Exhaust reproduces this OE correct muffler hanger used at the outlet end of the resonator. Used in 1972 & 1973 by Ford on the Thunderbird and by Lincoln on the Mark IV. This hanger is 5¾"Lx2"W and are $12.00 per hanger. Order the amount needed. Hangers generally ship out within 1 wk. -
Listing covers MY's 1970. 1971, 1972, 1973, & 1974 Maverick's with the stock 6 cyl. and 1 muffler. If your 1973-74 Maverick was stock with 2 mufflers, refer to 518892. Photo depicts the stock single exhaust for 1971-72 Ford Maverick 2dr. models with the stock 170ci or 200ci 6cyl.- System consists of the front exhaust pipe, center exhaust pipe, rear exhaust pipe, and muffler w/tail spout.
-
Covers MY's 1971, 1972, 1973, & 1974 Maverick's with the stock V8 single exhaust with muffler & resonator. Photo depicts the stock V8 single exhaust with resonator for 1971-73 Mavericks with 2 doors (4dr models require a different rear exhaust pipe).- System consists of the front exhaust pipe (AKA Y pipe), center exhaust pipe w/resonator, rear exhaust pipe, & muffler w/tail spout. Y pipe may be NORS.
-
This listing covers MY's 1932, 1933, 1934 & 1935 Lincoln K Series stock with the V12. Photo depicts the stock single exhaust for 1932-33 Lincoln K Series with the stock V12- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Original exhaust pipe was 2¾"OD. In reproduction it will be 2"OD flared to 2¾"OD with a flat flare. We do not have the needed gasket available or the proper flange for this connection. If you have the original cast iron flange, you will want to reuse it.
-
Photo is correct to this stock dual exhaust listing.- Stock Dual exhaust system includes LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, dual in/dual out transverse muffler and LS/RS tailpipes.
- Stock pipe diameter is 2¼"OD through out.
-
Photo is correct to listing.- Single exhaust system consists of Y pipe, catalytic converter, muffler, and tailpipe.
- Pricing of $593.75 in aluminized steel or $1040.00 in T409 Stainless steel. You may add the catalytic converter to your order for an additional $335.00.
-
This listing covers model years 1957, 1958, 1959, 1960 Rambler American, 1961, 1962, 1963, 1964 Rambler, American & Classic, 1965 & 1966 American, Classic along with Nash Marlin & Ambassador stock with the OHV 6 cyl. Photo depicts the stock single exhaust for 1964 AMC American's stock with the OHV 6cyl 196ci (except convertibles & station wagons).- For MY's 1957-63 (exc. 1962-63 convertibles) this single exhaust system consists of the exhaust pipe, muffler, and tailpipe. 1962-63 convertibles take a front exhaust pipe, rear exhaust pipe, muffler, and tail pipe.
- For MY's 1964-66 these single exhaust systems vary between models and body styles, with some set-ups having a transverse muffler.
- MY's 1957-60 all body styles except station wagon's need to report whether the car was stock with or without a wheel carrier.
-
This listing covers MY's 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 for Rebel, Ambassador, Classic, Marlin, American, Gremlin, Hornet, Javelin and AMX's with V8 and single exhaust. Photo depicts the system for a 1965 AMC Rambler Ambassador with the stock 327ci.- For MY's 1959-62 this single exhaust system consists of 2 pc. Y (cross-over & Y pipe), muffler and tailpipe.
- For MY's 1963-64 3 Seat Station Wagons this single exhaust system consists of 2 pc. Y (cross-over & Y pipe), rear exhaust pipe, muffler and tailpipe.
- For MY's 1963-74 (except the 3 Seat SW) this single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- Some Y pipes may be NORS.
-
This listing covers model years 1967, 1968, and 1969 AMC American/Rambler's with a straight 6 cyl. Photo depicts the stock single exhaust for 1967-68 AMC Rambler American's HT's & Sedan's with the 199ci 6cyl. Convertibles & SW require a different system, as does the 232ci 6cyl.- The single exhaust system consists of front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1956, 1957, and 1958 Century, Special and Super's. Photo depicts the system for a 1956 Buick Special Model 41 (with the tailpipe cut)- Single exhaust system consists of Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1960 and 1961 Buick LeSabre, Invicta, Electra and Electra 225 with V8 dual exhaust and a transverse muffler. Photo depicts the stock dual exhaust for 1961 Buick Invicta's & LeSabre's with the stock V8.- The dual exhaust consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, dual in/dual out transverse muffler, and LS/RS tailpipes.
- Metal-to-metal connection at the manifolds, no gasket required.
- 1960 models are flanged connected between the front and rear exhaust pipes but then clamped the remainder of the system.
- 1961 models are flanged connected until the tailpipes, which are clamped on. Gaskets are required between rear exhaust pipes and muffler inlets.
-
This listing covers 1961, 1962 & 1963 Skylark's and Special's stock with the stock V8 & 2bbl (for MY 1963 the type of carburetor does not matter) carburetor along with 1962 & 1963 Special's stock with a V6. Refer to listing 568813 for the 1961-62 4bbl set-up. Photo depicts the single exhaust system for 1962 Buick Specials with the stock 215ci V8 and 2bbl carburetor.- System contains Y pipe, rear exhaust pipe (our pattern pipe is 2 pcs vs the original 1 pc. long pipe), transverse muffler, tailpipe. Metal-to-metal connection at the manifolds, no gaskets required. Y pipe may be NORS.
- Original flanges were a formed flange which are NA. If the Y pipe for your system is not an NORS part, Waldron's Exhaust will use universal flat flanges in reproducing the Y pipe. If you have the original flanges and would like us to reuse them on your system, you are welcome to ship them to us in advance of building your system.
Questions? Call Us Today! (269) 467-7185 or (800) 503-9428
