- For MY 1955 this is a dual conversion exhaust and consists of LS front, center and rear exhaust pipes, RS exhaust pipe, LS/RS mufflers, and LS/RS tailpipes.
- For MY's 1956-57 the system requires a cast iron extension pipe on the LS. If you are in need of this part, please contact Fab Craft Metal Works at 800-208-8242. This dual exhaust system consists of LS front and rear exhaust pipe, RS exhaust pipe, LS/RS mufflers and LS/RS tailpipes.
- For MY's 1959-60 this dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1955, 1956, 1957, 1959, and 1960 Chieftain, Star Chief, Super Chief, Bonneville, Catalina, and Ventura's with the stock V8 and dual exhaust. Exclude 1958 models which were stock with mufflers and resonators. Photo depicts the dual exhaust system for MY 1957 Pontiac full size (except fuel injection). We do not have patterns for 1957 's with fuel injection. -
This listing covers model years 1961, 1962, and 1963 Lemans and Tempest's stock with a 4 cyl engine. Photo depicts the stock single exhaust for 1962 Pontiac Lemans & Tempest with the stock 4 cyl engine and 4bbl carburetor.- Single exhaust consists of the crossover pipe, exhaust pipe, muffler, and tailpipe. Crossover pipe will be mild steel due to unique pipe diameter of 1&1/8"OD.
- Waldron's Exhaust does not have the needed gaskets available.
- 1962 and 1963 models will be asked to report the stock carburetor set-up in the check out process.
-
This listing covers model years 1972, 1973, 1974, 1975, 1976, 1977 and 1978 D100, D200, W100, W200, and in 1978 W150. For MY's 1975-78 this is for exhaust systems without catalytic converters. Photo depicts the stock single exhaust for 1974 Dodge D200 ¾T with 2WD, 131"WB & the stock 360ci V8.- For MY's 1972-75 W100 & W200, 1972 D100 & D200, 1975 D100 & D200 single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- For MY's 1973-74 D100 & D200 single exhaust consists of the Y pipe, rear exhaust pipe, muffler, front tailpipe, and rear tailpipe.
- For MY's 1976-78 D100, D100 Club Cab, D200 & 1978 D200 Crew Cab single exhaust consists of the Y pipe, center exhaust pipe, rear exhaust pipe, muffler, front tailpipe, center tailpipe, and rear tailpipe.
- For MY's 1976-78 W100 & W200, 1976-77 W100 Club Cab & D200 Club Cab, and 1978 W150, W200 Club Camper, and D200 Club Camper single exhaust consists of the Y pipe, rear exhaust pipe, muffler, front tailpipe, center tailpipe, and rear tailpipe.
-
If you have an Inline 6 cylinder engine in your 1950, 1951, 1952, 1953, 1954, or 1955 Chevy ½T, ¾T or 1T and have always wanted a dual exhaust system then this listing is for you! This system is a direct fit to your cast iron Fenton Chevy 6 cyl headers. This system does not include the cast iron Fenton headers.- This dual conversion kit consists of inboard & outboard exhaust pipes, dual in/dual out muffler and inboard/outboard tailpipes.
- During the check out process, let us know how you would like your tailpipes to exit; out the sides along the quarter panel or straight out the back.
-
This listing covers MY's 1954, 1955, and 1956 Dodge ½T's with the stock V8. Photo is correct to the listing.- Single exhaust system consists of cross-over pipe, Y pipe (AKA 2 pc. Y pipe), rear exhaust pipe, muffler, and tailpipe.
-
These OEM correct resonator hangers will fit MY's 1966, 1967, 1968, and 1969 Lincoln Continentals. Hangers generally will ship within 1 wk. -
This listing allows you to order as many universal hangers as you may need. Let us know where on your system you will be using them and we will get you the best type for that position. Hangers generally ship out within 1 wk. -
This chrome turndown tip is cut parallel to the ground and is approximately 9" in length. Designed to fit over your tailpipe and weld in place. Available in 1½"ID, 1¾" ID, 2" ID & 2¼" ID for $20.00 (per), 2½" ID for $30.00 (per), and 3" ID for $50.00 (per). Tips generally will ship within 1 wk. -
This listing covers MY's 1967, 1968, 1969, 1970, 1971, 1972, 1972, 1973, and 1974 Imperials with the stock V8 and a single exhaust. Photo depicts the single exhaust system for 1971-73 Imperials with the stock V8- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, connector pipe (AKA over-axle pipe), and resonator with tailpipe.
-
This listing covers MY's 1935, 1936, and 1937 Ford 1½T's trucks with the stock V8. Photo depicts the stock single exhaust for 1936 Ford 1½T trucks with the stock 221ci V8 4WD 157"WB where customer selected option 2 on the flange rotation.- Single exhaust system consists of the crossover pipe, exhaust pipe, muffler, and tailpipe. You will be ask to report the flange rotation in the check out process.
-
This listing covers model years 1929, 1930, 1931, 1932, 1933, and 1934 American Austin's and 1938, 1939, and 1940 American Bantam's. Photo depicts system for MY's 1938-40 Bantam.- The single exhaust consists of the exhaust pipe, muffler and tailpipe.
- Exhaust pipes is 1½" OD with a 4blt flange.
- Gaskets are NA
- Please note that these tailpipes are 1" OD and will be Mild Steel (1" OD tubing is not available in either aluminized or T409 stainless steel) no matter which material you choose for the system. Also 1" clamps are not available in stainless steel so clamps needed at the tailpipe will be steel (only).
-
This listing covers model years 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Buick Riviera with V8 and allows you to delete the stock resonators. Photo depicts the system for a 1966 Buick Riviera with the stock V8 (with rear exhaust pipes cut to reduce shipping). MY's 1967-70 Riviera's take different exhaust pipes at 2¼"OD with flat spots but all other parts shown in the photo are correct.- 1966-70 Riviera exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front connector pipes, LS/RS rear connector pipes, LS/RS resonators w/tailpipes.
- 1971-74 Riviera exhaust system consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonators w/tailpipes.