Shop

  • This listing covers model years 1957,1958, 1959, and 1960 Olds 88 and 98, all body styles including SW, stock with a V8 and dual exhaust. 1958 models need to report type of suspension in the check out process.  Photo depicts the system for a 1957 Olds 98.
    • MY 1957 consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonator, LS front & rear tail pipes, and RS tailpipe.
    • MY 1958 W/O Air Suspension consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonator, LS front & rear tail pipes, and RS tailpipe.
    • MY 1958 W/Air Suspension consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonator, and LS/RS tailpipes.
    • MY's 1959-60 consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonator, and LS/RS tailpipes.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • This listing covers model years 1966, and 1967 all Toronado's, 1968, 1969, and 1970 Toronado's stock with the high performance engine. Photo depicted is correct to the listing. 
    • Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, dual in/dual out transverse muffler, LS/RS connector pipes, and LS/RS resonators with tailpipe.
    • MY's 1966, 67, 68, and 70 have straight exit tailpipes that except the chrome tips. For the chrome tips, contact USA Parts Supply at 800-872-2013.
    • MY 1969 has turn-downs.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • This listing covers model years 1965, 1966, and 1967 Barracuda's with the stock 273ci and 4bbl carburetor. Due to our manufacture loosing our pattern for the special tip, our last shipment of this part was not up to our standards and this listing no longer includes the special resonator. If you would like to see what we can offer regarding this resonator, please refer to SKU Arvin1212.  Photo depicts the stock single exhaust for 1965-66 Barracuda's with the stock 273ci & 4bbl. 
    • Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, over-axle pipe, and resonator eliminator pipe (integral resonator with rectangular polished stainless steel outlet has been eliminated).
    • Waldron's Exhaust does not offer over-sizing on this system. Y pipe starts off the manifolds at 1&7/8"OD and increases to 2½"OD where the Y pipe comes together, rear exhaust pipe is 2½"OD and reduces to 2¼"going into the muffler and stays 2¼" through remainder of system. 
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Tempest (up through 1970), Lemans, Grand Prix, Grand Am (beginning in 1972) and GTO's with the stock V8 and dual exhaust stock with 2 mufflers. Excludes MY's 1966-72 with Ram Air or High Output, for those systems please refer to listing 453475. Photo depicts the system for a 1974 Pontiac Grand Prix with a 455ci V8. 
    • Dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
    • 1964 & 1965 models have options regarding the tailpipes. In the check out process you will be asked to report your desired exit; out the back (toward the bumper) or exit out behind the rear wheels (designed to fit up to the split chrome tips that we do not offer).
    • For MY's 1970-74; this system does not include the chrome tips. We suggest you contact Ames Performance Engineering.
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • This listing covers model years 1972, 1973, 1974, 1975, 1976, 1977 and 1978 D100, D200, W100, W200, and in 1978 W150. For MY's 1975-78 this is for exhaust systems without catalytic converters. Photo depicts the stock single exhaust for 1974 Dodge D200 ¾T with 2WD, 131"WB & the stock 360ci V8. 
    • For MY's 1972-75 W100 & W200, 1972 D100 & D200, 1975 D100 & D200 single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
    • For MY's 1973-74 D100 & D200 single exhaust consists of the Y pipe, rear exhaust pipe, muffler, front tailpipe, and rear tailpipe.
    •  For MY's 1976-78 D100, D100 Club Cab, D200 & 1978 D200 Crew Cab single exhaust consists of the Y pipe, center exhaust pipe, rear exhaust pipe, muffler, front tailpipe, center tailpipe, and rear tailpipe.
    • For MY's 1976-78 W100 & W200, 1976-77 W100 Club Cab & D200 Club Cab, and 1978 W150, W200 Club Camper, and D200 Club Camper single exhaust consists of the Y pipe, rear exhaust pipe, muffler, front tailpipe, center tailpipe, and rear tailpipe.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • This listing covers model years 1968, 1969 , 1970, 1971, and 1972 Chevy C10, C20, and C30's with the stock V8 396ci or 402ci engines and a wheel base of 127". If you have a 115" or 133"WB, we cannot help you out with the exhaust pipes (no patterns at this time). We can help you out with muffler and tailpipes (only). For pricing, please give us a call.   Photo depicted fits 1969-72 Chevy C10/C20/C30 w/396ci w/127" with rear leaf springs.
    • This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes. These exhaust pipes are 2½" and system then reduces to 2" at the tailpipes.
    • During the check out process be sure to specify if truck has rear coil or leaf springs.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Custom Built Round Muffler

    $135.00$520.00
    Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.
    • Inlet & outlet nipples cannot be any longer than 7"
    • Regarding 4" round mufflers with an offset in/offset out position; the nipples cannot be any larger than 1½"ID
    • Regarding 4" round mufflers with a center in/center out position: the nipples cannot be any larger than 2¼"ID
    Use this listing to build your own custom round muffler (within our above parameter's) . You tell us what you need and we will get it built for you. Select . There will be no returns on custom built mufflers so be sure you triple check your measurements.  
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Waldron's Exhaust reproduces this OE correct muffler hanger which was stock on multiple systems. Order the amount needed. This hanger fits:
    • 1967-68 Ford 6 cyl, 8 cyl single exhaust & LS/RS dual exhaust at the muffler outlet.
    • 1967-71 Ford Thunderbird LS/RS dual at the muffler outlet.
    • 1969-71 Lincoln Mark III LS/RS dual at the muffler outlet.
    • 1967-68 Mercury 8 cyl single & LS/RS dual at the muffler outlet.
    Hangers generally will ship within 1 wk.   
  • This listing covers model years 1953, 1954 and 1955 Buick's. Excludes 1953 Buick Special which has a straight 8. Photo depicts the system for MY's 1954-55 Buick Roadmaster and  Super's.
    • System consists of Y pipe, rear exhaust pipe, muffler, and tailpipe.
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • This listing covers model years 1957 and 1958 full size Buick's with dual exhaust. Photo depicts the system for a 1958 Buick Roadmaster. 
    • This system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with short tailpipes. This system is a metal-to-metal connection at the manifold and no gaskets are required.
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Photo depicts the dual exhaust system with resonator eliminator pipes (vs with the stock resonators). For the stock system with resonators refer to SKU 568787. 
    • Stock Dual exhaust system includes LS/RS exhaust pipes, LS/RS resonators eliminator pipes, LS/RS connector pipes, dual in/dual out transverse muffler and LS/RS tailpipes.
    • Stock pipe diameter is 2¼"OD through out.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • This listing covers model years 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Buick Riviera with V8 and allows you to delete the stock resonators. Photo depicts the system for a 1966 Buick Riviera with the stock V8 (with rear exhaust pipes cut to reduce shipping). MY's 1967-70 Riviera's take different exhaust pipes at 2¼"OD with flat spots but all other parts shown in the photo are correct. 
    • 1966-70 Riviera exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front connector pipes, LS/RS rear connector pipes, LS/RS resonators w/tailpipes.
    • 1971-74 Riviera exhaust system consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonators w/tailpipes.
    Select options This product has multiple variants. The options may be chosen on the product page Details
Go to Top