- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
Listing covers model years 1918, 1919, 1920, 1921, 1922, 1923, 1924, 1925, 1926, 1927, 1928 w/6 cyl., 1929, 1930, 1931, 1932, 1933, 1934, 1935 and 1936 Packard's. Waldron's does not have the patterns for a 1928 Packard with an 8 cyl. Photo depicts system for a 1935 Packard. -
This listing covers model years 1965 and 1967 Barracuda's with the stock 273ci and 4bbl carburetor. Due to our manufacture loosing our pattern for the special tip, our last shipment of this part was not up to our standards and this listing no longer includes the special resonator. If you would like to see what we can offer regarding this resonator, please refer to SKU Arvin1212. Photo depicts the stock single exhaust for 1965 Barracuda's with the stock 273ci & 4bbl.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, over-axle pipe, and resonator eliminator pipe (integral resonator with rectangular polished stainless steel outlet has been eliminated).
- Waldron's Exhaust does not offer over-sizing on this system. Y pipe starts off the manifolds at 1&7/8"OD and increases to 2½"OD where the Y pipe comes together, rear exhaust pipe is 2½"OD and reduces to 2¼"going into the muffler and stays 2¼" through remainder of system.
-
This listing covers model years 1950, 1951, 1952, 1953, 1954, 1956, 1957, 1958, 1957, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, and 1969 International ½T, ¾T, and 1T's L110, L111, L112, L120, L121, L122, L130, R100, R102, R110, R111, R120, R121, R122, S100, S110, S112, S130, A110, A120, A130, B100, B110, B120, B130, C110, C120, C130, 1100A, 1200A, 1300A, C1000, D1000, C1100, D1100, C1200, D1200, C1300, D1300's stock with 2WD (excludes 4WD). Photo depicts the exhaust system for 1956 International ½T-2T with the stock BD220ci 6 cyl engine and with the spare tire carrier mounted on the left side, front of the bed on the outside.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- For MY's 1950-61: Exhaust pipe will not come with a flange (replacement is NA). You will need to keep the original cast-iron flange and reuse it.
- For MY's 1962-69: Exhaust pipe will come with a flange however if you have an original cast iron flange, keep and reuse it
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Select this option for a stock 5" or 6" round muffler with a body length less than 30". The checkout process will ask questions regarding your application and muffler will be built to those specifications.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Use this listing to build your own custom oval muffler. You tell us what you need and we will get it built for you. There will be no returns on custom built mufflers so be sure you triple check your measurements.
-
This listing covers model years 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Buick's with a straight 8. This listing is for MY's 1941-46 Buick's stock with a single carburetor set up. If your 1941-46 Buick was stock with a dual carburetor set-up refer to listing 568792. Photo depicts the system for a 1938 Buick 40 Series Special.- For MY's 1936-39 this single exhaust system consists of exhaust pipe, muffler, and tailpipe.
- For MY's 1940-48 this single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1957 and 1958 full size Buick's with dual exhaust. Photo depicts the system for a 1958 Buick Roadmaster.- This system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with short tailpipes. This system is a metal-to-metal connection at the manifold and no gaskets are required.
-
Waldron's Exhaust reproduces this set of 4 OE correct hangers for 1968,1969and 1970 AMC Javelin's and AMX's. This set consists of the LS/RS front and rear tail pipe hangers. This part will generally ship within 1 wk. -
Waldron's Exhaust reproduces this OE correct muffler hanger. This muffler hanger is correct to:- 1967 Ford Fairlane's (except 289ci & Junior Jewel)
- 1968 Ford Falcon (except for S.W.)
- 1967 Mercury Comet's (except Junior Jewel)
-
This listing allows you to order as many universal hangers as you may need. Let us know where on your system you will be using them and we will get you the best type for that position. Hangers generally ship out within 1 wk. -
This listing covers model years 1955, 1956, 1957, 1958, and 1959 Ford V8's stock with a dual exhaust. Excludes 1957-59 Convertibles & Retractable Hard Tops, for these systems refer to SKU: 518710. Photo depicts the system for MY's 1955-56 Ford Sunliner convertibles with the stock V8.- For 1955-56 MY's this dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- For 1957 S.W.'s, Ranchero's & Sedan Deliveries this dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. For all other body styles, this dual exhaust will consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes.
- For 1958 & 1959 MY's this dual exhaust will consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes.
-
This listing covers model years 1952, 1953, 1954, 1955, and 1956 Cadillac's (all series and all body styles) with stock dual exhaust with 4 mufflers. Photo depicts the system for 1952-53 Cadillac coupes and convertibles.- Dual exhaust system includes - LS/RS exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, LS/RS rear mufflers, LS/RS tailpipes. Tailpipes will fit into the factory tips located in the bumper. These tips are not part of the package.
- For Late MY 1953's with the Buick Dynaflow transmission, this system will NOT be a direct fit and modifications will be needed on the LS & RS exhaust pipes. If you would prefer to get all but the exhaust pipes, give us a call for pricing.
- For Series 75 and Commercial Chassis, this will not be a direct fit. We do not have all the patterns needed (in these model years) for Commercial Chassis or Series 75. If you have a 1952-56 Series 75 or Commercial Chassis we will supply you with a couple pieces of straight tubing (to be used between the mufflers and the resonators). You will then need to modify the system to fit.
- If you have original pipes still on your 1952-56 Cadillac Series 75 or Commercial Chassis, please give us a call at 800-503-9428.