- For the SW or Ranchero; single exhaust consist of the Y pipe, muffler, front tailpipe, and rear tailpipe. Y pipe may be NORS.
- For all other body styles: single exhaust system consists of Y pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1972, 1973, and 1974 Fairlane, Torino, and Ranchero's with a V8 and single exhaust. Photo depicts the stock single exhaust for a 1972 Ford Torino stock with a 400ci V8. -
Waldron's Exhaust is excited to announce we are now reproducing the Fairlane K Code Arvinode dual exhaust system. Convert your 1963, 1964, or 1965 Ford Fairlane A code with 260ci, standard 289ci, or HiPo 289ci (even if it was stock with a single exhaust) to this dual exhaust system with the sought after Arvinode tone. Photo is correct to the listing.- This system consists of the LS/RS muffler/resonator assembly. If the H pipe is needed, please add it to your cart in the check out process. We will build the correct H pipe to the engine reported on your order.
- There is not an option for tips on the Fairlane Arvinode system.
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, and 1951 Fords stock with a 4 cyl or 6 cyl. Photo depicts the stock single exhaust for 1942-46 Ford models 2GA & 6 GA (Special Deluxe & Super Deluxe) with the stock 90HP 6cyl.- Single exhaust consists of exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1945, 1947, 1948, and 1949 Dodge's with the stock 6 cyl engine. Photo depicts the system for a 1936 Dodge Coupe convertible.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
Listing covers MY 1960, and 1961 Desoto's stock with the stock V8 and single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust system consists of a Y pipe (which comes in 3 sections), muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers MY's 1967, 1968, 1969, 1970, 1971, 1972, 1972, 1973, and 1974 Imperials with the stock V8 and a single exhaust. Photo depicts the single exhaust system for 1971-73 Imperials with the stock V8- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, connector pipe (AKA over-axle pipe), and resonator with tailpipe.
-
This listing covers MY's 1966, 1967, 1968, 1969, 1970, and 1971 Jeep CJ-6, CJ-6A, & DJ6 with the stock V6 225ci engine. Photo depicts the system for 1966-71 CJ-5, CJ-5A, & DJ-5's with the stock V6 225ci. The rear exhaust pipe is longer on the CJ-6's.- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing is for 1975 CJ-5's and CJ-6's with the stock V8 without a converter (not for CJ's that were stock with converter). Photo depicts the single exhaust system offered stock without a catalytic converter for 1975 CJ5's with the stock V8 304ci.- This system consist of the Y pipe, rear exhaust pipe, muffler, and tail pipe.
-
This listing covers MY's 1976, 1977, 1978, 1979 & 1980 Jeep CJ-5's and CJ-7's with stock 304ci. This system was stock with a catalytic converter and the converter must in place for system to fit. If you are in need of a new direct fit catalytic converter, you may add it to your cart (for an additional $335.00) in the check out process. Photo depicts the system for 1977-78 CJ-7's with the stock 304ci (shown with the converter that we supply in place).- Single exhaust will consist of the Y pipe, muffler, and tail pipe. Stock converter sits between the Y pipe and muffler.
-
These chrome tip run straight out with a 45 degree angle cut and designed to slip over your tail pipe and be welded in place. Tips are approximately 9" in length. Available in 1½"ID, 1¾" ID, 2" ID, & 2¼" ID for $15.00 (per). Available in 2½"ID for $20.00 (per). Tips generally will ship within 1 wk. -
This chrome turndown tip is cut parallel to the ground and is approximately 9" in length. Designed to fit over your tailpipe and weld in place. Available in 1½"ID, 1¾" ID, 2" ID & 2¼" ID for $20.00 (per), 2½" ID for $30.00 (per), and 3" ID for $50.00 (per). Tips generally will ship within 1 wk. -
These chrome Pencil Tips are designed to be welded on and are approximately 9" in length. They are available in 1½" ID, 1¾" ID, 2" ID, 2¼" ID & 2½"ID for $15.00 (per). Available with 3" for $30.00 (per). Tips generally will ship within 1 wk.