- Single exhaust system consists of the exhaust pipe, muffler and tailpipe. Please specify model name through the check out process.
- 1929-31 Series 65 & Series 66 systems will come with a loose 2blt universal flange. If you have the original flange, keep it and reuse on your new exhaust pipe.
-
This listing covers model years 1924, 1925, 1926, 1927, 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949 and 1950 Chrysler's 4 cyl and 6 cyl. Photo depicts the stock single exhaust for 1942-48 Chrysler C34's, C38 Royal's, Windsor convertibles with the stock 6cyl.
-
This listing covers model years 1975, 1976, 1977, 1978, and 1979 Calais, Deville and Fleetwood's with a V8 and stock single exhaust. Excludes diesel engines. Photo depicts the system for 1975-76 Calais' and Deville's. Photo does not show the catalytic converter which is located between the Y (AKA front exhaust) pipe and rear exhaust pipe and must be in place for system to fit properly.
- This single exhaust system consists of front (Y) exhaust pipe, rear exhaust pipe, front muffler, connector pipe, and resonator w/tailspout.
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Skylark, Special, Gran Sport, Century, and Regal's with a V8 and stock dual exhaust. Photos depicts the system for MY's 1970-71 Skylarks (exc. Gran Sports)
- Dual System consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes. Metal-to-metal connection at the manifolds, no gaskets required.
-
This listing covers model years 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, and 1979 AMC Rebel, Ambassador, Marlin, Javelin, Hornet, Gremlin, Pacer, and Matador with the stock 6cyl. For American & Ramblers, refer to SKU 558616. Photo depicts the system for MY's 1976-77 AMC Gremlin's with the stock 6 cyl. 1 bbl carb. and stock without a converter.
- System consists of the front exhaust pipe, rear exhaust pipe, muffler and tailpipe.
- 1975-79 For some in these model years the system will require a catalytic converter. Please give us a call for pricing and availability.
-
This listing covers MY's 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Mercury Meteor (MY's 1962-63 only) & Comet's, including the Cyclone, Caliente and GT's, with their respective stock 144ci, 170ci, 200ci, and in 1969, the 250ci 6 cyl engine. Photo depicts the system for MY's 1963-65 Comet's with the stock 200ci.
- MY's 1960-65: system consists of the front exhaust pipe, rear exhaust pipe, and muffler w/tailspout.
- MY 1966: system consists of the front exhaust pipe, rear exhaust pipe (turns in board), and transverse muffler w/tailspout.
- MY's 1967 & 1969-70: system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
- MY 1968: system consists of the front exhaust pipe, rear exhaust pipe w/muffler, and tailpipe.
- MY's 1971-74: system consists of the front exhaust pipe, center exhaust pipe, rear exhaust pipe, and muffler w/tailspout.
-
This listing covers MY's 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952 1953, and 1954 Mercury's with the stock flathead V8. Convert your flathead Mercury to a dual exhaust with Waldron's Dual Conversion Kits! This dual conversion kit bolts directly to the stock manifolds (only). Conversion kit consists exhaust pipes, glasspacks, and tailpipes, along with gaskets and clamps. 1949-53 model years will also receive a blocker plate. Hangers are not included. You may opt to change your system from glasspacks to mufflers (for an additional cost) in the check out process.
- 1939-41; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1 5/8".
- 1942-48; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1¾".
- 1949-53; LS front & rear exhaust pipes start out at 1½" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
- 1949-51 with rear exit DS manifold; LS exhaust pipe starts out at 1 5/8" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
-
This listing covers model years 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, and 1949 International C1, D1, D2, C5, C15, D15, K1, K2, KB1, KB2, KB3's stock with the 6 cyl. Photos depicts the system for 1947, 1948 & 1949 International ½T-2T trucks.
- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Exhaust pipe will come with a universal flange, reuse the original cast iron flange (if possible).
-
This listing covers model years 1955, 1956, 1957, 1959, and 1960 Chieftain, Star Chief, Super Chief, Bonneville, Catalina, and Ventura's with the stock V8 and dual exhaust. Exclude 1958 models which were stock with mufflers and resonators. Photo depicts the dual exhaust system for MY 1957 Pontiac full size (except fuel injection). We do not have patterns for 1957 's with fuel injection.
- For MY 1955 this is a dual conversion exhaust and consists of LS front, center and rear exhaust pipes, RS exhaust pipe, LS/RS mufflers, and LS/RS tailpipes.
- For MY's 1956-57 the system requires a cast iron extension pipe on the LS. If you are in need of this part, please contact Fab Craft Metal Works at 800-208-8242. This dual exhaust system consists of LS front and rear exhaust pipe, RS exhaust pipe, LS/RS mufflers and LS/RS tailpipes.
- For MY's 1959-60 this dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1955, 1956, 1957 (excluding vehicles with fuel injection), 1958, 1959, and 1960 Chieftain, Star Chief, Super Chief, Bonneville, Catalina, and Ventura's with the stock V8. Photo depicts the single exhaust for a 1955 Chieftain with the stock V8 (shown with tailpipe cut to reduce shipping cost).
- MY's 1955-56 single exhaust system consists of the Y pipe (with flange connection to the rear exhaust pipe), rear exhaust pipe, muffler and tailpipe. This system requires 2 gaskets.
- MY's 1957-60 single exhaust system consists of the crossover pipe, exhaust pipe, muffler and tailpipe. This system requires 3 gaskets.