- 1939-41; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1 5/8".
- 1942-48; LS front & rear exhaust pipes start out at 1½" then bump up to 1 7/8" at the muffler, RS exhaust pipe is 1 7/8" with LS/RS tailpipes at 1¾".
- 1949-53; LS front & rear exhaust pipes start out at 1½" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
- 1949-51 with rear exit DS manifold; LS exhaust pipe starts out at 1 5/8" then bump up to 2" at the muffler, RS exhaust pipe is 2" with LS/RS tailpipes at 1¾".
-
This listing covers MY's 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952 1953, and 1954 Mercury's with the stock flathead V8. Convert your flathead Mercury to a dual exhaust with Waldron's Dual Conversion Kits! This dual conversion kit bolts directly to the stock manifolds (only). Conversion kit consists exhaust pipes, glasspacks, and tailpipes, along with gaskets and clamps. 1949-53 model years will also receive a blocker plate. Hangers are not included. You may opt to change your system from glasspacks to mufflers (for an additional cost) in the check out process.
-
This listing is for 1955, 1956 and 1957 GMC's with the stock Pontiac V8. Photo depicts the system for 1956 GMC 100 ½T's with the stock V8 and 114"WB
- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- MY 1955 will be asked to report the manifold ID during the check out process.
-
This listing covers model years 1955, 1956, 1957, 1959, and 1960 Chieftain, Star Chief, Super Chief, Bonneville, Catalina, and Ventura's with the stock V8 and dual exhaust. Exclude 1958 models which were stock with mufflers and resonators. Photo depicts the dual exhaust system for MY 1957 Pontiac full size (except fuel injection). We do not have patterns for 1957 's with fuel injection.
- For MY 1955 this is a dual conversion exhaust and consists of LS front, center and rear exhaust pipes, RS exhaust pipe, LS/RS mufflers, and LS/RS tailpipes.
- For MY's 1956-57 the system requires a cast iron extension pipe on the LS. If you are in need of this part, please contact Fab Craft Metal Works at 800-208-8242. This dual exhaust system consists of LS front and rear exhaust pipe, RS exhaust pipe, LS/RS mufflers and LS/RS tailpipes.
- For MY's 1959-60 this dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers MY's 1955, 1956, 1957, 1958, and 1959 Belvedere, Savoy, Plaza and Fury's with the stock V8 and dual exhaust. For MY 1958 with fuel injection, please give us a call. MY 1957-59 Convertibles & 1957 Fury's which were stock with resonators, this is a resonator eliminator option, for the stock set-up refer to 438513 Photo depicts the system for MY's 1957 and 1958 Savoy's, Belvedere's, and Plaza's (except convertibles) with the stock 318ci.
- For MY's 1955-56 this dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
- For MY's 1957-59 this dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
This listing covers model years 1946-1947 Models 2123 Super Clipper, 2126 Custom Super, 2103 Super Clipper Eight, 2106 Custom Super Clipper Eight, 2101 Clipper Eight, 2111 Deluxe Clipper Eight, 2100 Clipper Six, & 2130 Clipper Taxicab/ 1948-1949 Models 2240 Taxi, 2201 Standard Eight, 2202 Super Eight, 2211 Deluxe Eight, 2232 Super Eight,2232 Super Eight Convertible, 2222 Super Eight, 2206 & 2233 Custom Eight, / 1949- 1950 Models 2301, 2302, 2322, 2332 Super Eight's, 2301, 2302, & 2332 Super Eight's / 1951 Model 200 Series 2401, Model 250 Series 2401 Sport Coupe & Convertible, Model 300 Series 2402 & Model 400 Series 2406 / 1952 Model 200 Series 2501, Model 250 Series 2531 Sport Coupe & Conv., Model 300 Series 2502 & Model 400 Series 2506/ 1953 2601 Clipper Standard, 2602, 2606, 300, 400 Sedan, 2611 Clipper Deluxe, 2631, & 300 HT & Conv. / 1954, 1955 and 1956 Clipper, Patrician, Cavalier and Caribbean's with the stock 6 or 8 cyl engine. Photo depicts the system for a 1947 Packard model 2101.
- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
Listing covers model years 1969, 1970, and 1971 Mark III with the stock V8 and dual exhaust. Photo depicts exhaust system for 1969-71 Lincoln Mark III.
- Dual exhaust system consists of the H pipe, LS/RS mufflers, LS/RS connector pipe, and LS/RS resonator w/tailspout.
- This stock system starts out at 2¼"OD and reduces down to 1¾"OD at the muffler outlets.
-
This listing covers model years 1967 (289ci, 390ci) 1968 (428ci, 427ci, 390ci), 1969 (428ci, 429ci, 390ci, 351ci, 302ci), and 1970 (429ci only) Mustangs with their respective stock V8 and dual exhaust. For MY 1970 Mustangs with a 351ci or 428ci; refer to listing 518741. If you would prefer a dual exhaust that eliminates the transverse muffler, refer to listing 518748. Photo depicts the system for a 1969 Mach 1.
- Dual exhaust system consist of the H pipe, LS/RS rear exhaust pipes with resonators, dual in/dual out transverse muffler, and LS/RS tailpipes.
- Excludes the chrome tips.
- Tell us how your would like your tailpipes to exit in the check out form below.
-
This listing covers model years 1959, 1960, 1961, 1962 4bbl, 1964, 1965, and 1966 Thunderbird's. For MY 1962 with a 6bbl and 1963 T-birds, refer to 518724. Photo depicts the system for all 1961 Ford Thunderbirds.
- For 1959-63 models this dual exhaust system consists of H pipe, LS/RS rear exhaust pipes with resonators, and LS/RS mufflers w/tailspouts.
- For 1964-66 models this dual exhaust system consists of H pipe, LS/RS rear exhaust pipes with resonators, and LS/RS mufflers built into the tailpipes.
-
This listing covers MY's 1962, 1963 and 1964 Ford Sunliner, Galaxie, 300 & Custom convertibles. Photo depicts the dual exhaust system for 1964 Ford Full Size Convertibles with the stock 390ci and log style manifolds.
- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS muffler with tailpipes.
-
This listing is for all 1958 Pacers, Rangers, Citations, Corsairs, Round Up, Bermuda, and Villager's with the stock V8 and dual exhaust. Photo depicts the system for 1958 Edsel Corsair & Citation HT's.
- Dual exhaust systems for 1958 Pacer or Ranger Station Wagon's consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailspout. All others body styles with dual exhaust consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with 5" round resonator's built in, and LS/RS rear tailpipe. These systems are stock at 2"OD through out.
- Dual exhaust systems for 1958 Corsair or Citation consists of LS/RS exhaust pipes, balance tube, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailspout.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, and 1961 Dodge Coronet, Royal, Custom Royal, D500, Matador, and Polara's with a V8 and stock dual exhaust system. Excludes 1957-59 Dodge convertibles which were stock with 2 mufflers and 2 resonators. Photo depicts the dual exhaust system for 1958 Dodge's (except D500, convertibles, or station wagons) with the stock V8
- For MY's 1955-56 this dual exhaust consists of LS exhaust pipe, RS front exhaust pipe, RS rear exhaust pipe, LS/RS mufflers and LS/RS tailpipes. 1956 models were stock with a Y pipe off the RS however we build it as a straight exhaust pipe.
- For MY's 1957-61 this dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.