-
Waldron's Exhaust reproduces this set of 4 OE styled muffler and tail pipe hangers (very close to OE in looks, hangs like OE) for 1956 and 1957 Pontiac full size vehicles stock with a dual exhaust system. This hanger set is incomplete as it does not include the hanger used on the driver side rear exhaust pipe. Hangers generally ship out within 1 wk. -
Photo is correct to the listing.- This single exhaust system consist of the exhaust pipe, muffler, connector pipe (that you will trim to fit), resonator, and tailpipe.
-
This listing covers MY's 1933 & 1934, models 1005, 1006, 1107, 1108, 1935 models 1207 & 1208 & 1936 models 1407 & 1408 Packard's with the stock V12 and a 1 muffler single exhaust.- Waldron's Exhaust offers the muffler (long body length) and tailpipe. You will need to make the connection from the manifold to the muffler inlet.
-
These split chrome tips have a 2.25" ID and are designed to slip over your 2.25" tailpipe and are to be welded on. These are the tips to purchase for your Firebird. Tips generally will ship within 1 wk. -
This listing covers MY's 1966, 1967, 1968, 1969, 1970, and 1971 Jeep CJ-6, CJ-6A, & DJ6 with the stock V6 225ci engine. Photo depicts the system for 1966-71 CJ-5, CJ-5A, & DJ-5's with the stock V6 225ci. The rear exhaust pipe is longer on the CJ-6's.- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
Listing covers MY 1960, and 1961 Desoto's stock with the stock V8 and single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust system consists of a Y pipe (which comes in 3 sections), muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers MY's 1957, 1958, 1959, 1960, 1961, 19621, 1963 and 1964 Studebaker trucks with the stock 6 cyl.
- Complete system consists of exhaust, muffler and tailpipe.
-
This listing covers MY's 1947, 1948, 1949, 1950, & 1951 Frazer's F47, F485, F486, F495, F496, F505, F506, F515 & F516 with the stock 6 cyl. Photo depicts the system for a 1948 Frazer with the stock 6 cyl. with a 1bbl carb.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe
- 1948 F486 will need to report 1bbl or 2bbl carburetor
- 1947-48 will need to report if built before or after SN27000
- If you opt to cut the system, know that both the exhaust pipe and tail pipe will be cut.
-
This listing covers MY's 1975, 1976, 1977 & 1978 Suburban's stock with the 454ci. This dual exhaust system was stock with resonators.- Dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailspout.
-
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
This listing covers model years 1932 and 1933 Franklin's with the stock 12 cyl. engine. For 1933 Olympics', models 18 or 18B, refer to listing 453478.
- Single exhaust consists of the cross-over pipe, exhaust pipe, muffler and tailpipe.
-
This listing covers 1963 Ford Thunderbirds with the stock V8 and a single exhaust.
- This single exhaust consists of the Y pipe (flange connected to the), rear exhaust pipe (flange connected to the), transverse muffler w/long outlet nipple, and short tailpipe.
- Systems starts out at 2" OD, increases to 2¼" OD where the 2 pipes connect on the Y and remains 2¼" through the rest of the system.
-
This listing covers MY's 1930, 1931, & 1932 Models DC & DG stock with the 8 cyl. and 1 muffler.
- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
- Single exhaust system consists of the exhaust pipe, muffler, connector pipe (trim to fit), resonator, and tailpipe.
-
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
- This single exhaust system consists of the exhaust pipe (w/2 bolt flange), front muffler, connector pipe, and tailpipe with rear muffler built into the inlet end.
-
This listing is for 1940 & 1941 Hupmobile Skylark's with the stock 6 cyl. engine.
- Single exhaust consists of the front exhaust pipe, rear exhaust pipe (AKA over-axle pipe), transverse muffler, and tailpipe. Waldron's does not offer this exhaust pipe with a flange. You will want to save the original cast iron flange and reuse.
-
Listing covers 1973 & 1974 Ford Maverick's with the stock 6 cyl. with muffler & resonator.
- System consists of the front exhaust pipe, center exhaust pipe w/resonator, rear exhaust pipe, and muffler w/ tail spout.
-
- System consists of the 2 pc. Y pipe (cross-over and Y pipe), rear exhaust pipe, resonator, connector pipe, and muffler w/tailspout. 2 pc. Y pipe may be NORS.
Questions? Call Us Today! (269) 467-7185 or (800) 503-9428
