1961-79 Olds F-85 / Cutlass

  • This listing covers model years 1961, 1962, and 1963 F85 and Cutlass's with the stock 215ci and single exhaust. Photo depicts the stock single exhaust for 1963 F85 with the stock 215ci V8.
    • This system is a metal-to-metal connection at the manifold and no gaskets are required there. However, some of these Y pipes do require a gasket at the outlet end and unfortunately Waldron's does not have these gaskets available.
    • Single exhaust system consists of the Y pipe (flange connection to), rear exhaust pipe, single in/single out same end transverse muffler, and tailpipe. Y pipe may be NORS.
    • Original flanges were a formed flange which are NA. If the Y pipe for your system is not an NORS part, Waldron’s Exhaust will use universal flat flanges in reproducing the Y pipe. If you have the original flanges and would like us to reuse them on your system, you are welcome to ship them to us in advance of building your system. 
    MY 1962 is unique & we will need to know what barrel carburetor was stock and whether your 1962 is a 1st, 2nd, or 3rd design. You will need to report your set-up to us in the check out process. If you are unsure which design you have, this information should help you make a determination:
    1. 1st Design: The propeller shaft center bearing support is mounted to the floor pan.
    2. 2nd Design: The propeller shaft center bearing support is mounted to the cross member. Rear exhaust pipe will have a flat area 34" from the outlet end.
    3. 3rd Design: The propeller shaft center bearing support is mounted to the cross member. Rear exhaust pipe is round through out (no flattened area).
    • This turbo single exhaust is unique and consists of the front exhaust pipe (AKA crossover pipe), center exhaust pipe (AKA turbo outlet pipe), rear exhaust pipe, resonator, over-axle pipe, single in/dual out transverse muffler, and LS/RS tailpipes.
    • Waldron's Exhaust also has the turbo inlet pipe available for $60.00 or in T409 SS for $99.00. Simply add it to your cart, if needed.
     
  • Photo is correct to the listing. 
    • 1962 & 1963 Olds Jetfire Turbo 2nd Design single exhaust system consists of the front exhaust pipe (AKA cross-over pipe), center exhaust pipe (AKA turbo outlet pipe), rear exhaust pipe, connector pipe (AKA over-axle pipe), single in/dual out transverse muffler, and LS/RS tailpipes.
    • Waldron's Exhaust also has the turbo inlet pipe available for $60.00 or in T409 SS for $99.00. Simply add it to your cart, if needed.
     
  • This listing is for MY's 1964 & 1965 F85's that were stock with the Buick 225ci V6. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. MY 1965 Y pipe may be NORS.
  • This listing covers model years 1964, 1965, 1966, and 1967 Olds Cutlass & F85 stock with a V8 and single exhaust with muffler and resonator. Photo depicts the stock single exhaust for 1965-67 Olds F85's (except Vista Cruiser) with the stock 330ci V8 & 4bbl carburetor 
    • Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear single in/single out transverse muffler, and tailpipe.
     
  • This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Olds F85 and Cutlass' with the stock V8 stock dual exhaust or for MY's 1965-74 you may convert your single exhaust to a dual exhaust. We will supply you with the needed blocker plate. For MY 1964 this dual exhaust is for 1964 F85's /4-4-2 STOCK with a dual exhaust. We do NOT offer a single-to-dual conversion. If your 1964 Cutlass/F85 was stock with a single than we can help you out with a single exhaust (only).  Photo depicts the system for a 1971 Cutlass 4-4-2 with the stock 455ci engine. 
    • This dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
    • You will be asked to report the stock set-up in the the check out process. 
  • This listing covers model years 1967, 1968, 1969, 1970, and 1971 F-85 and Cutlass' with a stock 6 cyl 250ci and single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • For MY 1967 this single exhaust consists of the exhaust pipe, muffler, front tailpipe, and rear tailpipe.
    • For MY's 1968-71 this single exhaust consists of the exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1968, 1969, 1970, 1971, and 1972 Olds F85 (including station wagon), and Vista Cruiser's with the stock V8 and single exhaust. This single exhaust system consists of the crossover pipe (Vista Cruiser's in 1968-69 w/400ci & 1971 w/455ci this is a NORS Y pipe), exhaust pipe, front muffler, connector pipe, transverse resonator with tailpipe.  
  • This listing covers model years 1968, 1969, 1970, 1971, 1972, 1973, and 1974 F-85's and Cutlass' with the stock V8 and single exhaust w/1 muffler. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Single exhaust system consists of the front exhaust pipe (AKA cross-over pipe), rear exhaust pipe, muffler, and tailpipe.
  • This listing is for 1975, 1976, and 1977 Cutlass' with the stock 6 cyl or V8 and begins behind the catalytic converter. Photo depicts all but the catalytic converter for a 1976 Olds Cutlass 2 dr. with the stock 350ci w/4bbl carb. 
    • Single cat-back exhaust consists of the rear exhaust pipe, muffler, and tailpipe.
    • If the converter and/or pipes forward of the converter are needed, please contact us for pricing and availability.
    • This single exhaust cat-back system connects to the converter and consists of the rear exhaust pipe, single in/single out transverse muffler, and RS tailpipe.
     
    • This single cat-back system connects to the converter and consists of rear exhaust pipe, single in/dual out transverse muffler, and LS/RS tailpipe.
     

Title

Go to Top