Shop

  • This listing covers model years 1967, 1968, and 1969 Firebird's stock with the V8 and single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Single exhaust system consists of the Y pipe, rear exhaust pipe, transverse muffler, and tailpipe.
  • This listing covers model years 1967, 1968, and 1969 Firebird's with the OHC 6 cyl engine and 4 bbl carburetor. Photo depicts the system for MY 1968 Firebird with the stock 6 cyl. and 4bbl carb. 
    • Single exhaust system consists of the Y pipe, center exhaust pipe, rear exhaust pipe (over-axle), transverse muffler, and tailpipe.
  • This listing covers model years 1967, 1968, and 1969 Firebird's stock with the 6 cyl and 1 bbl carburetor. Photo depicted is correct to the listing.
    • Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1967, 1968, and 1969 Signet, Valiant, and Barracuda's with the stock 383ci or 340ci V8 and dual exhaust. Photo depicts the stock dual exhaust system for 1968 Barracuda's, Valiant's & Signet's with the stock 340ci or 383ci. 
    • Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. The chrome tip for model years 1968 & 1969 are not part of this system. Please, check out our chrome tips and add to your cart if desired.
  • This listing covers MY's 1967, 1968, and 1969 GMC ½T 1500, ¾T 2500, and 1T 3500's with the stock V8.
    • Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
     
  • This dual exhaust listing is an alternative design which eliminates the stock transverse muffler and puts mufflers up where stock resonators would sit. Listing covers model years 1967, 1968, and 1969 Mustangs with their respective stock V8; 289ci, 302ci, 390ci, 427ci, 428ci, or 429ci. For the OE correct dual exhaust system, refer to listing 518740. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Dual alternative design exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. This is not an OE correct system and OEM hangers may not work.
  • Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.
    • Simply fill out the form below to let us know exactly what mufflers specifications are needed for your application.
  • This listing covers model years 1967, 1968, and 1969 Camaro's with a V8 and stock single exhaust. Photo depicts the system for MY 1967.
    • Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
  • This listing covers model years 1967, 1968, and 1969 AMC American/Rambler's with a straight 6 cyl. Photo depicts the stock single exhaust for 1967-68 AMC Rambler American's HT's & Sedan's with the 199ci 6cyl. Convertibles & SW require a different system, as does the 232ci 6cyl.  
    • The single exhaust system consists of front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
       
  • Waldron's Exhaust reproduces this OE correct muffler hanger. This muffler hanger is correct to:
    • 1967 Ford Fairlane's (except 289ci & Junior Jewel)
    • 1968 Ford Falcon (except for S.W.)
    • 1967 Mercury Comet's (except Junior Jewel)
    This muffler hanger is correct to both stock single and dual exhaust systems. Simply order the amount needed for your system. Hangers generally ship out within 1 wk. 
  • This listing covers MY's 1967 and 1968 Imperials with the stock V8. Photo depicted is correct to the listing.
    • Dual exhaust system consists of LS/RS front exhaust pipe with flange connection to the LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
  • This listing covers MY's 1967 and 1968 Chevy Camaro with the stock V8 and a dual system that was stock with transverse muffler and resonators. Photo depicted is correct to the listing however exhaust pipes vary per stock V8.
    • This dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS over-axle pipes, dual in/dual out transverse muffler, and LS/RS tailpipes.
    • This dual exhaust consists of the H pipe, LS/RS glasspack design mufflers, and tailpipes w/glasspack design resonators.
  • This listing is for MY 1967 Cougars with the stock 289ci and single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • This single exhaust system consists of an NORS Y pipe, rear exhaust pipe w/resonator, transverse muffler, and tailpipe.
  • This listing is for MY 1967 Cougar's with the stock 390ci and a dual exhaust.
    • This dual exhaust consists of the H pipe, LS/RS rear exhaust pipes w/resonators, dual in/dual out transverse muffler, and LS/RS tailpipes. Resonators are conventional style on non-GT's and glasspack style on GT's. 
     
  • This listing is for folks who want to keep their 1967 Comet, stock with a 390ci or 427ci V8, true to stock with the resonator. For a resonator eliminator option, refer to listing 453470. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS tailpipes, and transverse muffler (sits between tailpipes).
  • Photo depicted is correct to the listing. 
    • This single exhaust consists of the front exhaust pipe, rear exhaust pipe with resonator, transverse muffler, and tailpipe. It is 2"OD throughout.
  • Photo depicted is correct to the listing. 
    • This dual exhaust in unique and consists of the H pipe, LS/RS rear exhaust pipe, LS/RS mufflers, LS/RS tailpipes, and transverse resonator.
     
  • AFTERMARKET NOS PARTS FROM WALDRON'S EXHAUST; These are components that we have acquired over the years. The parts were manufactured by Walker, Maremont, International Parts Corp (IPC), Arvin or other exhaust component manufacturers as service replacement parts for OEM components. They will be cleaned to remove any surface corrosion and coated with a corrosion-resistant coating unless you ask us to leave them untreated. This pipe fits 1967 Buick Skylark Sport Wagon V8 with Super Turbine 400 trans. This part will generally ship within 1 wk. 
  • This listing covers model years 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, and 1975 International trucks with the stock V8. Excludes 1966-68 C1100-1300, D1100-130, & C110-130 with 4WD. Photo depicts the system for MY's 1966-69 International trucks with the stock 304ci and 2WD (the tailpipe for this system was built in 2 sections to reduce the cost of shipping).
    • This single exhaust system consists of the crossover pipe, Y pipe, rear exhaust pipe, muffler, and tailpipe.
  • This listing covers MY's 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973 and 1974 Mercury Monterey, Montclair, Parklane, Commuter, Colony Park, Station Wagon, Marquis and Marauder's with the stock 390ci, 410ci, 428ci ,429ci, 351ci, 400ci & 460ci  V8 and single exhaust. Photo depicts the single exhaust for a 1972 Mercury full size with the stock 429ci or 460ci V8
    • Single exhaust consists of the Y pipe, muffler and tail pipe. Some systems (depending on engine and/or body style) will have a front and rear tail pipe. MY 1967 with a 410ci or 428ci & MY 1973 with a 429ci or 460ci were stock with a resonator. If you would like to include the resonator, please give us a call at 800-503-9428.
  • This listing covers model years 1966, 1967, 1968, 169, 1970, 1971, 1972, 1973, and 1974 Ford Bronco's with the stock 6 cyl.
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
     
  • This listing covers model years 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Buick Riviera with V8 and allows you to delete the stock resonators. Photo depicts the system for a 1966 Buick Riviera with the stock V8 (with rear exhaust pipes cut to reduce shipping). MY's 1967-70 Riviera's take different exhaust pipes at 2¼"OD with flat spots but all other parts shown in the photo are correct. 
    • 1966-70 Riviera exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front connector pipes, LS/RS rear connector pipes, LS/RS resonators w/tailpipes.
    • 1971-74 Riviera exhaust system consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonators w/tailpipes.
  • This listing covers MY's 1966, 1967, 1968, & 1969 Pontiac Custom, GTO, Lemans, & Tempest with Ram Air or High Output, 1970 models with Ram Air, and 1971-72 models with High Output. If your MY 1966, 1967, or 1969 was stock with 4 mufflers, refer to listing 453477. For systems w/o RA or HO, refer to listing 453210. Photo depicts the stock dual exhaust system for 1967 Pontiac Lemans, Tempest, and Custom with RA or HO manifolds on the stock 400ci V8 & standard transmission (this is a resonator eliminator system for 1967 GTO's with RA or HO & STD trans). 
    • This dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
    • This system starts out at 2¼"OD on the exhaust pipes which reduce to 2"OD at the muffler inlets and then increases to 2¼" OD at the tailpipes.
    • For MY's 1970-72, this system does not include the chrome tips but will be designed to fit up to the stock tip design.
    •  If the cast iron flanges are needed, add them to your cart for an additional $45.00.
    • Metal-to-metal connection at the manifolds. Gaskets are not required.
  • This listing model years 1966, 1967, 1968, 1969, 1970, 1971, and 1972 models J-262, J-264, J-362, J-364 Gladiator's, J-162, J-164 Station Wagon & Panel Delivery with the stock V8 304ci, 350ci, or 360ci. Photo depicts the system for a 1970 Jeep Wagoneer. 
    • Single exhaust system consists of LS crossover pipe, Y pipe, muffler, and tailpipe. Y pipe may be NORS. 
  • This listing covers MY's 1966, 1967, 1968, 1969, 1970, and 1971 Jeep CJ-6, CJ-6A, & DJ6 with the stock V6 225ci engine. Photo depicts the system for 1966-71 CJ-5, CJ-5A, & DJ-5's with the stock V6 225ci. The rear exhaust pipe is longer on the CJ-6's.
    • Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
     
  • This listing covers model years 1966, 1967, 1968, 1969, 1970, and 1971 CJ-5, CJ-5A, and D-J5 with the stock Dauntless V6 225ci. The photo depicts the exhaust system for 1966-71 CJ5, CJ5A and DJ5 with gas tank forward of the rear axle.
    • 1966-Early 1971 with the gas tank sitting forward of the rear axle, this single exhaust system consists of a Y pipe, rear exhaust pipe, transverse muffler and tailpipe exiting on the PS.
    • Later 1971 models with the gas tank sitting aft of the rear axle; this single exhaust pipe consists of a cross-over pipe, Y pipe, inline muffler and tailpipe exiting on the DS.
    • You will need to report which system is needed in the check out process.
     
  • This listing covers model years 1966, 1967, 1968, 1969, 1970, and 1971 Fairlane & Torino's, 1970-71 Ranchero's with the stock V8 and stock dual exhaust. Excludes 1966-69 Ranchero's & SW's which were stock with a single exhaust only. For 1967 Fairlane & Torino models, this is a resonator eliminator option. For the stock set up, refer 518765. Photo depicts the system for a 1970 Torino SCJ 
    • Dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
     
  • This listing covers model years 1966, and 1967 all Toronado's, 1968, 1969, and 1970 Toronado's stock with the high performance engine. Photo depicted is correct to the listing. 
    • Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, dual in/dual out transverse muffler, LS/RS connector pipes, and LS/RS resonators with tailpipe.
    • MY's 1966, 67, 68, and 70 have straight exit tailpipes that except the chrome tips. For the chrome tips, contact USA Parts Supply at 800-872-2013.
    • MY 1969 has turn-downs.
  • This listing covers MY's 1966, 1967, 1968, 1969, and 1970 Mercury Comets with their respective stock V8: 390ci, 427ci, 302ci, 428CJ, 351ci, 429ci, 429CJ & 429SCJ. For MY 1967 this is a resonator eliminator option as this model year was stock with a transverse resonator between tailpipes. For that listing, refer to 453471. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
  • This listing covers model years 1966, 1967 1968, 1969, and 1970 Coronet R/T, Charger R/T's and Super Bee's stock with a 426ci or 440ci. MY 1971 we can help with mufflers and tailpipes only. The exhaust pipes were not reproduced by any of the after-market companies. If you have the original exhaust pipes on your 1971 with the 440ci, give us a call at 800-503-9428. Photo depicts the dual exhaust for the 440ci. 
    • Dual exhaust system for the 440ci consists of 2 pc. H pipe (LS/RS pipes join at the balance tube), LS/RS mufflers, and LS/RS tailpipes.
    • Dual exhaust system for the 426ci consists of 1 pc. H pipe, LS/RS muffler, and LS/RS tailpipes.
    • System starts out at 2½"OD with the H pipe reducing down to 2¼"OD as it goes into the mufflers & stays 2¼"OD through the tailpipes.
    • MY's 1968-70 will be asked to report desired tailpipe exit: designed to accept stock chrome tips or with turndowns.
  • This listing covers model years 1966, 1967, 1968, and 1969 Lemans and Tempest with the stock OHC 6 cyl and 4 bbl carburetor. For MY's 1966-67 this is a resonator delete system. If you would like the stock system with the resonator refer to SKU 453200. Photo depicts the system for MY's 1966-67 with the resonator eliminated.
    • Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
  • These OEM correct resonator hangers will fit MY's 1966, 1967, 1968, and 1969 Lincoln Continentals. Hangers generally will ship within 1 wk. 
  • This listing covers model years 1966, 1967, 1968, and 1969 Continentals with the stock V8.
    • Dual exhaust consists of the LS/RS exhaust pipes, LS/RS front mufflers assembly, LS/RS rear muffler assembly. Waldron's Exhaust also supplies you with 1 clamp (used to connect resonator balance tube) and 4 gaskets (used at flanges on inlet/outlet of resonators). System does not include any hangers or bolts. To bolt the system together, use ½-16x1½ Grade 8 bolts (½" diameter / 16 coarse thread / 1½" length).
    • Waldron's does not offer any sound level options on these systems. OEM sound level only.
  • This listing covers 1966 & 1967 Pontiac Leman's & Tempest's stock with the OHC 230ci 6cyl and a 4BBL carburetor. If you would prefer to eliminate the resonator, refer to SKU 453213. Photo depicts the stock single exhaust for 1966-67 Leman's & Tempest's with the stock 230ci 6cyl and the 4bbl carb. 
    • This single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, connector pipe, and resonator with tailspout.
  • This listing covers MY's 1966 and 1967 Ford 7-Liter's stock with the 428ci V8. If you have a 1966 427ci or a 1967 427ci in your Ford 7-Litre (instead of the stock 428ci) we can help you put a 7-Litre system on your Ford. Photo depicts the system for MY 1966 7 Litre.
    • Ford 7-Liter exhaust system consists of the H pipe, LS/RS front glasspacks, and LS/RS rear tailpipes w/glasspacks. Tailpipes include welded hanger attachment brackets and angle-cut turn-downs as shown.
    • Pipe diameter of the stock 428ci is 2"OD through out. The 427ci H pipe starts out at 2½" OD but quickly reduces to 2" and remains 2" through out.
    • The body diameter of all 4 glasspacks will be 3½" OD if order an aluminized steel system and 3" OD if ordering a T409 stainless steel system.

Title

Go to Top