Shop

  • For Packard MY's 1957 and 1958  Clippers, Hawks, Golden Hawks & Luxurys.
    • Dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS muffler assembly, and LS/RS tailpipes.
    • Shipping full length is the only option under this listing.
  • This listing covers 1949, 1950, 1951, 1952. 1953 & 1954 Henry J's with the stock 4 cyl or 6 cyl engine. Photo depicts the stock single exhaust for 1951-54 Henry J's with the stock 6cyl. 
    • This single exhaust system consists of the exhaust pipe, muffler and tailpipe.
  • This listing covers 1972, 1973 & 1974 Chrysler New Yorker's, Newport's & 300's stock with a dual exhaust system and the stock engine. Photo depicts the stock dual exhaust for all 1974 Chrysler Full Size with the stock V8. 
    • This dual exhaust system consist of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
     
  • This listing covers 1966 & 1967 Pontiac Leman's & Tempest's stock with the OHC 230ci 6cyl and a 4BBL carburetor. If you would prefer to eliminate the resonator, refer to SKU 453213. Photo depicts the stock single exhaust for 1966-67 Leman's & Tempest's with the stock 230ci 6cyl and the 4bbl carb. 
    • This single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, connector pipe, and resonator with tailspout.
  • This listing covers 1955 Cadillac models (except for S60 Fleetwood's which are stock with resonators, only) with the stock 331c V8 that were stock without resonators. Photo is correct to the listing.
    • This dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
  • This listing covers MY's 1925, 1926, 1927, 1928, 1929, 1930, 1931, and 1932 Oldsmobile's with the stock 6 cyl. Photo depicts the stock single exhaust for 1931 Oldsmobile F31 with the stock 6cyl. engine.
    • Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Waldron's does not have the needed gasket available. 
  • Covers MY's 1971, 1972, 1973, & 1974 Maverick's with the stock V8 single exhaust with muffler & resonator. Photo depicts the stock V8 single exhaust with resonator for 1971-73 Mavericks with 2 doors (4dr models require a different rear exhaust pipe). 
    • System consists of the front exhaust pipe (AKA Y pipe), center exhaust pipe w/resonator, rear exhaust pipe, & muffler w/tail spout. Y pipe may be NORS. 
  • This listing covers MY's 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973 and 1974 Mercury Monterey, Montclair, Parklane, Commuter, Colony Park, Station Wagon, Marquis and Marauder's with the stock 390ci, 410ci, 428ci ,429ci, 351ci, 400ci & 460ci  V8 and single exhaust. Photo depicts the single exhaust for a 1972 Mercury full size with the stock 429ci or 460ci V8
    • Single exhaust consists of the Y pipe, muffler and tail pipe. Some systems (depending on engine and/or body style) will have a front and rear tail pipe. MY 1967 with a 410ci or 428ci & MY 1973 with a 429ci or 460ci were stock with a resonator. If you would like to include the resonator, please give us a call at 800-503-9428.
  • This listing is for MY's 1940 and 1941 Graham Supercharged 6 cyl. engine. Photo is correct to the listing. 
    • This single exhaust system consists of the exhaust pipes (1&5/8 OD), dual in/single out resonator (AKA mixing box), connector pipe (2" OD), transverse muffler, and tailpipe (1¾" OD).
    • Waldron's Exhaust does not supply flanges with these exhaust pipes. Original flanges are cast iron. Keep and reuse your cast iron flanges.
  • At this time, we are not offering the stock resonator that completes the true stock single exhaust system for 1965-67 Barracuda's / Darts stock with the 273ci & 4bbl carb. Our former supplier lost our original tip that was previously used to provide the OE look on this resonator and our last shipment of these resonators was less then top notch work. These resonators (shown in photo) are being sold "as is". Photos shows the resonator with the protection film still covering the stainless steel tip.
    • The stock resonator was 4½" in diameter. These resonator are 4" in diameter with the inlet of 2¼" ID.
    This part will generally ship within 1 wk.   
  • This system covers MY's 1929 and 1930 Essex's with the stock 6 cyl. engine. Photo is correct to the listing.
    • System consists of exhaust pipe, muffler, and tail pipe.  Stock pipe diameter is 1¾" throughout. The exhaust pipe does not use a flange. 
  • Waldron's Exhaust reproduces this OE correct front tailpipe hanger used on the driver side on all 1968-74 Javelin's and AMX's V8 stock with a dual exhaust. Hangers generally ship out within 1 wk. 
  • Waldron's Exhaust reproduces this OE correct front tailpipe hanger used on the passenger side on all 1968-70 Javelin's stock w/6cyl. along with 1968-70 Javelin's and AMX's V8 single exhaust. This front tailpipe hanger is also used on the passenger side for 1968-74 AMX's and Javelin's stock with a dual exhaust. Hangers generally ship out within 1 wk. 
  • Waldron's Exhaust reproduces these OEM correct rear tailpipe hanger for 1968,1969, and 1970 Javelin's stock with a 6cyl, 1968, 1969, and 1970 AMX's and Javelin's stock with a V8 single and/or dual exhaust. Hangers generally will ship within 1 wk. 
  • Waldron's Exhaust reproduces these OE correct muffler hangers. These muffler hangers fit 1968-69 Ford Mustangs and Mercury Comets. Used in both single and dual exhaust systems. Order for single or dual exhaust below. Hangers generally will ship within 1 wk. 
  • This is a set of 4 OEM correct hangers for MY's 1959 and 1960. These hangers are used at the muffler outlets and on the frame rail prior to the rear axle. This set does not include the hangers needed at the rear. Hangers generally will ship within 1 wk. 
  • Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.
    • Select this option for a stock round muffler with a body length between 30"-38".  The check out process will ask questions to determine what your vehicle is and the muffler will be built to the stock specifications.
  • This listing covers MY's 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Ford Broncos with their stock V8 289ci or 302ci. Photo depicts the stock single exhaust for 1970-74 Ford Bronco's with the stock V8 302ci.
    • Single exhaust system consists of the cross-over pipe, Y pipe (AKA 2 pc. Y pipe), muffler, and tailpipe.
     
  • This listing covers MY's 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988 & 1989 Dodge D100's, D150's and D250's with the stock 6 cyl and starts behind the catalytic converter. If the pipes forward of the converter and/or the converter are needed, please contact us for availability and pricing. Photo depicts the stock cat-back single exhaust for 1980-87 Dodge D100's, D150's, D200's & D250's with the stock slant 6 225ci and 131" WB (also shown in photo is the rear section of the stock catalytic converter built for this customer).
    • For MY's 1980-87 D100's w/225ci this single exhaust consists of muffler, front tailpipe and rear tailpipe.
    • For MY's 1982-83 D150's & 1982-86 D250's w/225ci this single cat-back exhaust consists of the muffler, front tailpipe and rear tailpipe.
    • For MY's 1984-87 D150's & 1987 D250's w/225ci this single cat-back exhaust consists of the rear exhaust pipe, muffler, front tailpipe and rear tailpipe.
    • For MY's 1988-89 D150's & D250's w/3.9L this single cat-back exhaust consists of the muffler, front tailpipe, center tailpipe, and rear tailpipe.
     
  • This listing covers MY's 1968, 1969, 1970, and 1971 Mercury Montego's stock with their respective V8: 390ci, 302ci, 289ci or 351ci. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • This single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
  • This listing covers MY's 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Cougar's with their respective stock V8: 289ci, 302ci or 351ci. Photo depicts the stock single exhaust for 1969 & 1970 Cougar's with the stock 351ci. 
    • For MY's 1968-73: This single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS. 
    • For MY 1974: This single exhaust consists of the Y pipe, muffler, and tailpipe.
  • This listing is for MY 1967 Cougars with the stock 289ci and single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • This single exhaust system consists of an NORS Y pipe, rear exhaust pipe w/resonator, transverse muffler, and tailpipe.
  • This listing covers MY's 1975, 1976,  and 1977 Mercury Comet's, Comet GT's, Cyclone's, and Monarchs with a 6 cyl. or  V8 and starts behind the catalytic converter. MY 1977 will need to report converter length in the check out process.  Photo depicts the stock single cat-back system for 1976 Comet 4dr's with the stock 6cyl (2dr models require a different rear exhaust pipe). 
    • Starting behind the converter, this system consists the rear exhaust pipe, front muffler, connector pipe, and rear muffler w/tailspout.
  • This listing covers MY's 1966, 1967, 1968, 1969, and 1970 Mercury Comets with their respective stock V8: 390ci, 427ci, 302ci, 428CJ, 351ci, 429ci, 429CJ & 429SCJ. For MY 1967 this is a resonator eliminator option as this model year was stock with a transverse resonator between tailpipes. For that listing, refer to 453471. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending. 
    • Dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.

Title

Go to Top