- For MY's 1928-31 the single exhaust system consists of exhaust pipe, muffler and tailpipe. You will be asked to report the angle of your manifold in the check out process.
- For MY’s 1932-33 the single exhaust system consists of a front exhaust pipe, rear exhaust pipe, muffler, and tailpipe. Trimming may be required to fit exhaust pipe to the manifold. OE system was flanged connected between front and rear exhaust pipes but our system will be a “slip-fit” design. Waldron’s does not offer a gasket for this system.
- For MY's 1934-40 the single exhaust system consists of exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1938, 1939, and 1940 Cadillac's with the stock single exhaust stock with 1 muffler. Excludes Model 65. MY's 1936 & 1937 V8's are stock with muffler & resonator. Photo depicts the single exhaust system for 1932-33 Cadillac's with the stock V8 -
This listing covers model years 1960, 1961, 1962, 1963, and 1964 LeSabre, Invicta, Electra, and Wildcat's with a V8 and stock single exhaust. Photo depicts the system for 1962 Electra and Electra 225 stock with a single exhaust.- Single exhaust system includes Y pipe, center exhaust pipe, rear exhaust pipe, transverse muffler and tailpipe. Y pipe may be NORS. Metal-to-metal connection at the manifolds, no gaskets required.
-
Photo depicts the system for MY 1959 Invicta and LeSabre.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, LS/RS rear mufflers with tailspouts.
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, and 1946 Buick with the straight 8 and dual carburetors. This listing is for MY's 1941-46 with the dual carburetor set up. If your 1941-46 Buick was stock with a single carburetor set-up, refer to listing 568791. Photo depicts the system for a 1941 Buick Super with dual carb set up.- System consists of extension pipe, front exhaust pipe (AKA Y pipe), rear exhaust pipe, muffler, and tailpipe.
-
This dual exhaust system covers 1963 Avanti, only. Photo depicted is correct to the listing.- System consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes. Tips are not included.
-
This listing covers the model year 1953 Buick Specials with the straight 8. Photo depicted is correct to the listing.- Single exhaust system includes exhaust pipe, muffler and tailpipe. Due to muffler length, this muffler is built in 2 pcs. and will have a bead weld around the center of the muffler.
-
This listing covers model years 1976, 1977, 1978, 1979, & 1980 CJ5's and CJ7's stock from the factory with a converter. Photo depicts the stock single exhaust, including the catalytic converter, for 1977-78 CJ5's with the stock 258ci. (1976 takes a different tailpipe).- The single exhaust system consist of the exhaust pipe, muffler, & tailpipe.
- If the converter is needed, you may add it to the order for an additional $335.00.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material. -
For Packard MY's 1957 and 1958 Clippers, Hawks, Golden Hawks & Luxurys.- Dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS muffler assembly, and LS/RS tailpipes.
- Shipping full length is the only option under this listing.
-
This listing covers 1949, 1950, 1951, 1952. 1953 & 1954 Henry J's with the stock 4 cyl or 6 cyl engine. Photo depicts the stock single exhaust for 1951-54 Henry J's with the stock 6cyl.- This single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
This listing covers 1972, 1973 & 1974 Chrysler New Yorker's, Newport's & 300's stock with a dual exhaust system and the stock engine. Photo depicts the stock dual exhaust for all 1974 Chrysler Full Size with the stock V8.- This dual exhaust system consist of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
This listing covers 1966 & 1967 Pontiac Leman's & Tempest's stock with the OHC 230ci 6cyl and a 4BBL carburetor. If you would prefer to eliminate the resonator, refer to SKU 453213. Photo depicts the stock single exhaust for 1966-67 Leman's & Tempest's with the stock 230ci 6cyl and the 4bbl carb.- This single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, connector pipe, and resonator with tailspout.
-
This listing covers 1955 Cadillac models (except for S60 Fleetwood's which are stock with resonators, only) with the stock 331c V8 that were stock without resonators. Photo is correct to the listing.- This dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers MY's 1925, 1926, 1927, 1928, 1929, 1930, 1931, and 1932 Oldsmobile's with the stock 6 cyl. Photo depicts the stock single exhaust for 1931 Oldsmobile F31 with the stock 6cyl. engine.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Waldron's does not have the needed gasket available.
-
Covers MY's 1971, 1972, 1973, & 1974 Maverick's with the stock V8 single exhaust with muffler & resonator. Photo depicts the stock V8 single exhaust with resonator for 1971-73 Mavericks with 2 doors (4dr models require a different rear exhaust pipe).- System consists of the front exhaust pipe (AKA Y pipe), center exhaust pipe w/resonator, rear exhaust pipe, & muffler w/tail spout. Y pipe may be NORS.
-
This listing is for MY's 1940 and 1941 Graham Supercharged 6 cyl. engine. Photo is correct to the listing.- This single exhaust system consists of the exhaust pipes (1&5/8 OD), dual in/single out resonator (AKA mixing box), connector pipe (2" OD), transverse muffler, and tailpipe (1¾" OD).
- Waldron's Exhaust does not supply flanges with these exhaust pipes. Original flanges are cast iron. Keep and reuse your cast iron flanges.
-
At this time, we are not offering the stock resonator that completes the true stock single exhaust system for 1965-67 Barracuda's / Darts stock with the 273ci & 4bbl carb. Our former supplier lost our original tip that was previously used to provide the OE look on this resonator and our last shipment of these resonators was less then top notch work. These resonators (shown in photo) are being sold "as is". Photos shows the resonator with the protection film still covering the stainless steel tip.- The stock resonator was 4½" in diameter. These resonator are 4" in diameter with the inlet of 2¼" ID.
-
This system covers MY's 1929 and 1930 Essex's with the stock 6 cyl. engine. Photo is correct to the listing.- System consists of exhaust pipe, muffler, and tail pipe. Stock pipe diameter is 1¾" throughout. The exhaust pipe does not use a flange.
-
Waldron's Exhaust reproduces this OE correct front tailpipe hanger used on the driver side on all 1968-74 Javelin's and AMX's V8 stock with a dual exhaust. Hangers generally ship out within 1 wk. -
Waldron's Exhaust reproduces this OE correct front tailpipe hanger used on the passenger side on all 1968-70 Javelin's stock w/6cyl. along with 1968-70 Javelin's and AMX's V8 single exhaust. This front tailpipe hanger is also used on the passenger side for 1968-74 AMX's and Javelin's stock with a dual exhaust. Hangers generally ship out within 1 wk. -
Waldron's Exhaust reproduces these OE correct muffler hangers. These muffler hangers fit 1968-69 Ford Mustangs and Mercury Comets. Used in both single and dual exhaust systems. Order for single or dual exhaust below. Hangers generally will ship within 1 wk. -
This is a set of 4 OEM correct hangers for MY's 1959 and 1960. These hangers are used at the muffler outlets and on the frame rail prior to the rear axle. This set does not include the hangers needed at the rear. Hangers generally will ship within 1 wk. -
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- Select this option for a stock round muffler with a body length between 30"-38". The check out process will ask questions to determine what your vehicle is and the muffler will be built to the stock specifications.
-
This listing covers MY's 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Ford Broncos with their stock V8 289ci or 302ci. Photo depicts the stock single exhaust for 1970-74 Ford Bronco's with the stock V8 302ci.- Single exhaust system consists of the cross-over pipe, Y pipe (AKA 2 pc. Y pipe), muffler, and tailpipe.