- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- You will be asked report with or without hot air heater in the check out process.
- 1940-48 MY's with the hot air heater will need to report the OD at the manifold.
-
This listing covers model years 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Lincoln Continentals with the stock V12. Photo depicts the system for 1940-48 Continentals stock with the V12 and a Hot Air Heater -
Photo depicts the stock cat-back single exhaust for 1978-79 Olds Cutlass (including Hurst) with the stock 350ci 5.7L gas engine (diesel take different rear exhaust pipe).- This single cat-back system connects to the converter and consists of rear exhaust pipe, single in/dual out transverse muffler, and LS/RS tailpipe. Some parts may be NORS.
-
This listing covers model years 1967, 1968, and 1969 Firebird's with the OHC 6 cyl engine and 4 bbl carburetor. Photo depicts the system for MY 1968 Firebird with the stock 6 cyl. and 4bbl carb.- Single exhaust system consists of the Y pipe, center exhaust pipe, rear exhaust pipe (over-axle), transverse muffler, and tailpipe.
-
This listing is for 1940 & 1941 Hupmobile Skylark's with the stock 6 cyl. engine.- Single exhaust consists of the front exhaust pipe, rear exhaust pipe (AKA over-axle pipe), transverse muffler, and tailpipe. Waldron's does not offer this exhaust pipe with a flange. You will want to save the original cast iron flange and reuse.
-
This listing covers model years 1978-1979 with the stock 403ci or 400ci Special Performance V8's, 1980 301W & 301T High Performance V8's, & 1981's with the stock 301T High Performance Trans Am and Formula's. Excludes 1980-81 Trans Am/Formula's with the stock 305ci which did not come stock with split tips. For that system refer to SKU 453249 Photo depicts the stock single-into-dual exhaust for 1978-79 Pontiac Firebird Trans Am's with the stock 400ci with the stock split chrome tips which may be added to your order.- Single to dual cat-back system consists of rear Y pipe, LS/RS mufflers, LS/RS front tailpipe, and LS/RS rear tailpipes designed for you to slip on & weld the split chrome tips.
- You may add a set of the Split Chrome Tips to your order in the checkout process.
- Y pipe may be NORS.
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, and 1946 Buick with the straight 8 and dual carburetors. This listing is for MY's 1941-46 with the dual carburetor set up. If your 1941-46 Buick was stock with a single carburetor set-up, refer to listing 568791. Photo depicts the system for a 1941 Buick Super with dual carb set up.- System consists of extension pipe, front exhaust pipe (AKA Y pipe), rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1953, 1954 and 1955 Buick's. Excludes 1953 Buick Special which has a straight 8. Photo depicts the system for MY's 1954-55 Buick Roadmaster and Super's.- System consists of Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1956, 1957, and 1958 Century, Special and Super's. Photo depicts the system for a 1956 Buick Special Model 41 (with the tailpipe cut)- Single exhaust system consists of Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
Listing covers 1957 and 1958 Buick Roadmaster and Limited.- Single exhaust system consists of front exhaust pipe, rear exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1957 & 1958 Buick Special, Century and Super's. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1966, 1967, 1971, 1972, 1973, and 1974 LeSabre's with V8 stock single and 1 muffler. Photos depicts the system for a 1974 LeSabre with the 350ci V8.- System consists of front exhaust (Y) pipe, rear exhaust pipe, muffler and tailpipe. Metal-to-metal connection at the manifolds, no gaskets required.
-
This listing covers 1961, 1962 & 1963 Skylark's and Special's stock with the stock V8 & 2bbl (for MY 1963 the type of carburetor does not matter) carburetor along with 1962 & 1963 Special's stock with a V6. Refer to listing 568813 for the 1961-62 4bbl set-up. Photo depicts the single exhaust system for 1962 Buick Specials with the stock 215ci V8 and 2bbl carburetor.- System contains Y pipe, rear exhaust pipe (our pattern pipe is 2 pcs vs the original 1 pc. long pipe), transverse muffler, tailpipe. Metal-to-metal connection at the manifolds, no gaskets required. Y pipe may be NORS.
- Original flanges were a formed flange which are NA. If the Y pipe for your system is not an NORS part, Waldron's Exhaust will use universal flat flanges in reproducing the Y pipe. If you have the original flanges and would like us to reuse them on your system, you are welcome to ship them to us in advance of building your system.
-
This listing covers model years 1961 & 1962 Buick Skylarks and Specials with a stock V8 and 4bbl carburetor. Refer to listing 568812 for the 2BBL set-up. Photo depicts the stock single exhaust for1962 Buick Skylarks with the stock 215ci V8 and 4bbl carburetor.- System consists of Y pipe, rear exhaust pipe, transverse muffler, and tailpipe. Some Y pipes are NORS only.
- Original flanges were a formed flange which are NA. If the Y pipe for your system is not an NORS part, Waldron's Exhaust will use universal flat flanges in reproducing the Y pipe. If you have the original flanges and would like us to reuse them on your system, you are welcome to ship them to us in advance of building your system.
-
This listing covers model years 1964, 1965, 1966 & 1967 Buick Skylark & Special with a V6 or V8 and stock single exhaust. Excludes the Skylark Sport Wagon. Refer to listing 568814 for that exhaust system. This listing does cover all other station wagon single exhaust systems. Photo depicts the V6 single exhaust system for MY 1964.- This single system consists of the Y pipe, rear exhaust pipe, muffler, tailpipe. Metal-to-metal connection at the manifolds, no gaskets required.
- 1964 models do not require a flange between the Y pie and the rear exhaust pipe while 1965-67 models do require (and will have) a flange connection between the Y pipe and the rear exhaust pipe.
-
This listing covers model years 1975, 1976, 1977, 1978, and 1979 Buick LeSabre and Electra's with a 403ci or 455ci with single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Cat back system consists of the rear exhaust pipe, front muffler, connector pipe, rear muffler and tailpipe. If the Y pipe and/or catalytic converter are needed, please give us a call for pricing and availability.
-
This listing covers model years 1975, 1976, 1977, 1978 ,1979, 1980, 1981, 1982, 1983, 1984, and 1985 Buick Riviera's with a 2 muffler single exhaust. Photo depicts the cat-back system for MY's 1984-85 Riviera's
- Cat back system consists of the rear exhaust pipe, front muffler, connector pipe, rear muffler and tailpipe. If the Y pipe and/or catalytic converter are needed, please give us a call for pricing and availability.
-
This listing covers model years 1980, 1981, 1982, 1983, 1984, and 1985 Buick Riviera, LeSabre, and Electra's with a V6 or a V8 and a 2 muffler single exhaust. This listing does not cover models with diesel engines. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single cat-back system consists of the center exhaust pipe, rear exhaust pipe, muffler, connector pipe, rear muffler, and tailpipe.
-
This listing covers model years 1949, 1950, and 1951 Cadillac's with the stock V8. Photo depicts the system for 1949 Cadillac's.- Single exhaust system consists of the cross-over pipe (manifold to manifold), exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1986, 1987, 1988, and 1989 Seville's. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Cat-back system consists of rear exhaust pipe, connector pipe, muffler and tailpipe. If crossover pipe, Y pipe and/or converter are needed, please call for pricing and availability.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, and 1964 Bel Air, Impala, Biscayne, Delray, Nomad, 150 and 210's with a V8 and stock single exhaust.
- Single exhaust system consists of the front exhaust pipe (AKA Y pipe), exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1965, 1966, and 1967 Bel Air, Impala, Biscayne, Super Sport, and Caprice's with the stock V8. MY 1967; this is OE correct for all engines. MY's 65-66; this is OE correct for the 283ci and a resonator eliminator option for the 327ci & 396ci (which were stock with resonator). Photo depicts the stock single exhaust system for 1965-66 Chevy Full Size with the stock 283ci V8 (stock without a resonator).- Single exhaust system consists of the Y pipe, muffler, and tailpipe. Y pipe may be NORS.
- For MY's 1965-67 stock with the 283ci; we will need you to report the desired tailpipe exit in the check out process.
-
This listing covers MY's 1968, 1969, and 1970 Bel Air, Biscayne, Impala, Caprice, and Super Sports V8 with stock single exhaust. Photo depicts the stock single exhaust for all 1968 Chevy Full Size (except S.W.'s) with the stock 307ci V8 & the optional straight exit tailpipe.- Single exhaust system consists of the front exhaust (Y ) pipe, rear exhaust pipe, muffler, and tailpipe.
- 1968 Chevy's stock with a 307ci were offered 2 different tail pipe exits. If you have a 1968 with the 307ci, please report desired tail pipe in the check out process.
-
This listing covers model years 1971, 1972, 1973, and 1974 Bel Air, Impala, Caprice and Super Sports with V8 and 2bbl carburetors. Photo depicts the stock single exhaust for 1974 Bel Air, Impala, Caprice & Super Sport's with the stock V8 & 2bbl carb.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1960, 1961, 1962, 1963, and 1964 Dodge's with a V8 and stock with a single exhaust.
- Single exhaust system includes Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe NORS only.
-
This listing covers model years 1975 and 1976 Charger, Coronet, and Monaco's that were stock without a catalytic converter and is a resonator eliminator option. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Some systems have a Y pipe, rear exhaust pipe, muffler, connector pipe, and resonator with tailpipe, while others have Y pipe, muffler, connector pipe, and resonator eliminator pipe.
-
This listing covers MY's 1965 and 1966 Dodge Darts stock with the 273ci V8 and 4 BBL carburetor. Due to our manufacture loosing our pattern for the special tip, our last shipment of this part was not up to our standards and this listing no longer includes the special resonator. If you would like to see what we can offer regarding this resonator, please refer to SKU Arvin1212. Photo is correct to the listing.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, over-axle pipe, and resonator eliminator pipe (integral resonator with rectangular polished stainless steel outlet has been eliminated).
- Waldron's Exhaust does not offer over-sizing on this system. Y pipe starts off the manifolds at 1&7/8"OD and increases to 2½"OD where the Y pipe comes together, rear exhaust pipe is 2½"OD and reduces to 2¼"going into the muffler and stays 2¼" through remainder of system.
-
Listing covers model years 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Custom, LTD, and Galaxie's with stock V8 and single exhaust. Photo depicts the system for a 1972 Ford with the stock 429ci V8.- Some model years and body styles consist of the Y pipe, muffler, and tailpipe while other model years and body style consists of the Y pipe, muffler, front tailpipe and rear tailpipe. Y pipe may be NORS.
-
This listing covers model years 1968, 1969, 1970, 1971, 1972, 1973, and 1974 F-85's and Cutlass' with the stock V8 and single exhaust w/1 muffler. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust system consists of the front exhaust pipe (AKA cross-over pipe), rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Savoy, Belvedere, Satellite, and Fury's with the stock V8 and single exhaust. For some applications this is a resonator eliminator option. Photo depicts the stock single exhaust for 1971 Satellites (w/4drs.) & 1972 Satellites (all models) with the stock 318ci.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1965, 1966, and 1967 Barracuda's with the stock 273ci and 4bbl carburetor. Due to our manufacture loosing our pattern for the special tip, our last shipment of this part was not up to our standards and this listing no longer includes the special resonator. If you would like to see what we can offer regarding this resonator, please refer to SKU Arvin1212. Photo depicts the stock single exhaust for 1965-66 Barracuda's with the stock 273ci & 4bbl.
- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, over-axle pipe, and resonator eliminator pipe (integral resonator with rectangular polished stainless steel outlet has been eliminated).
- Waldron's Exhaust does not offer over-sizing on this system. Y pipe starts off the manifolds at 1&7/8"OD and increases to 2½"OD where the Y pipe comes together, rear exhaust pipe is 2½"OD and reduces to 2¼"going into the muffler and stays 2¼" through remainder of system.
-
This listing covers 1970-71 Barracuda's with the stock 318ci or 383ci and 1972, 1973, and 1974 Barracuda's with the stock 318ci. Photo depicts the stock single exhaust for 1970-71 Barracuda's with the stock 318ci.- Single exhaust system consists of the cross-over pipe, Y pipe, center exhaust pipe, rear exhaust pipe (over-axle), and muffler with short tailspout.
- Y will be NORS (will not be T409 stainless steel & T409 pricing has been set to reflect a NORS Y pipe).
- Systems with the 318ci do NOT require gaskets while the 383ci does.
-
This listing covers model years 1972, 1973, and 1974 Valiant, Duster, and Scamp's with the stock 318ci engine. Refer to listing 438536 for Barracuda's.
- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1961, 1962, 1963, and 1964 Bonneville, Catalina, Grand Prix, Star Chief, and Ventura's with the stock V8 and single exhaust. Photos depicts the exhaust system for 1963--64 Catalina's & Gran Prix's with the stock 389ci.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1981, 1983, 1984, and 1985 Bonneville, Catalina, and Parisienne's stock with the diesel engine, without converter and inline muffler.
- Single exhaust system consists of the crossover pipe, front exhaust pipe, rear exhaust pipe, muffler, and tailpipe. Some parts may be NORS.
-
This listing covers 1972, 1973, & 1974 Commando's, Wagoneer's, J10's, J20's, CJ5 and CJ6's with the stock V8. Photo depicts a 1972-73 Jeep Commando with standard transmission.- Single exhaust system consists of a crossover pipe, Y pipe, muffler, and tailpipe.
- System is a metal-to-metal connection at the manifold. No gaskets are required at 2 pc. Y pipe.
- If you have a 1972-73 CJ5 or CJ6 you will need to report the desired tailpipe diameter. These models were stock with either 1¾" or 2" OD tailpipe.
-
This listing model years 1966, 1967, 1968, 1969, 1970, 1971, and 1972 models J-262, J-264, J-362, J-364 Gladiator's, J-162, J-164 Station Wagon & Panel Delivery with the stock V8 304ci, 350ci, or 360ci. Photo depicts the system for a 1970 Jeep Wagoneer.- Single exhaust system consists of LS crossover pipe, Y pipe, muffler, and tailpipe. Y pipe may be NORS.