- System consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes. Tips are not included.
-
This listing covers 1994, 1995 & 1996 Buick Roadmaster's & Roadmaster Estate Station Wagons with the stock 5.7L 350P V8 and starts behind the converters. If the converters are needed, please call us at 1-800-503-9428 for availability and pricing. Photo is correct to this listing.
- This cat-back dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with tailspout.
-
This listing covers 1972, 1973 & 1974 Chrysler New Yorker's, Newport's & 300's stock with a dual exhaust system and the stock engine. Photo depicts the stock dual exhaust for all 1974 Chrysler Full Size with the stock V8.
- This dual exhaust system consist of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
This listing covers MY's 1925, 1926, 1927, 1928, 1929, 1930, 1931, and 1932 Oldsmobile's with the stock 6 cyl. Photo depicts the stock single exhaust for 1931 Oldsmobile F31 with the stock 6cyl. engine.
- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Waldron's does not have the needed gasket available.
-
Covers MY's 1971, 1972, 1973, & 1974 Maverick's with the stock V8 single exhaust with muffler & resonator. Photo depicts the stock V8 single exhaust with resonator for 1971-73 Mavericks with 2 doors (4dr models require a different rear exhaust pipe).
- System consists of the front exhaust pipe (AKA Y pipe), center exhaust pipe w/resonator, rear exhaust pipe, & muffler w/tail spout. Y pipe may be NORS.
-
This listing is for MY's 1940 and 1941 Graham Supercharged 6 cyl. engine. Photo is correct to the listing.
- This single exhaust system consists of the exhaust pipes (1&5/8 OD), dual in/single out resonator (AKA mixing box), connector pipe (2" OD), transverse muffler, and tailpipe (1¾" OD).
- Waldron's Exhaust does not supply flanges with these exhaust pipes. Original flanges are cast iron. Keep and reuse your cast iron flanges.
-
At this time, we are not offering the stock resonator that completes the true stock single exhaust system for 1965-67 Barracuda's / Darts stock with the 273ci & 4bbl carb. Our former supplier lost our original tip that was previously used to provide the OE look on this resonator and our last shipment of these resonators was less then top notch work. These resonators (shown in photo) are being sold "as is". Photos shows the resonator with the protection film still covering the stainless steel tip.
- The stock resonator was 4½" in diameter. These resonator are 4" in diameter with the inlet of 2¼" ID.
-
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.
- Select this option for a stock round muffler with a body length between 30"-38". The check out process will ask questions to determine what your vehicle is and the muffler will be built to the stock specifications.
-
This listing covers MY's 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Ford Broncos with their stock V8 289ci or 302ci. Photo depicts the stock single exhaust for 1970-74 Ford Bronco's with the stock V8 302ci.
- Single exhaust system consists of the cross-over pipe, Y pipe (AKA 2 pc. Y pipe), muffler, and tailpipe.
-
This listing covers MY's 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988 & 1989 Dodge D100's, D150's and D250's with the stock 6 cyl and starts behind the catalytic converter. If the pipes forward of the converter and/or the converter are needed, please contact us for availability and pricing. Photo depicts the stock cat-back single exhaust for 1980-87 Dodge D100's, D150's, D200's & D250's with the stock slant 6 225ci and 131" WB (also shown in photo is the rear section of the stock catalytic converter built for this customer).
- For MY's 1980-87 D100's w/225ci this single exhaust consists of muffler, front tailpipe and rear tailpipe.
- For MY's 1982-83 D150's & 1982-86 D250's w/225ci this single cat-back exhaust consists of the muffler, front tailpipe and rear tailpipe.
- For MY's 1984-87 D150's & 1987 D250's w/225ci this single cat-back exhaust consists of the rear exhaust pipe, muffler, front tailpipe and rear tailpipe.
- For MY's 1988-89 D150's & D250's w/3.9L this single cat-back exhaust consists of the muffler, front tailpipe, center tailpipe, and rear tailpipe.
-
This listing covers MY's 1968, 1969, 1970, and 1971 Mercury Montego's stock with their respective V8: 390ci, 302ci, 289ci or 351ci. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- This single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers MY's 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Cougar's with their respective stock V8: 289ci, 302ci or 351ci. Photo depicts the stock single exhaust for 1969 & 1970 Cougar's with the stock 351ci.
- For MY's 1968-73: This single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
- For MY 1974: This single exhaust consists of the Y pipe, muffler, and tailpipe.
-
This listing covers MY's 1975, 1976, and 1977 Mercury Comet's, Comet GT's, Cyclone's, and Monarchs with a 6 cyl. or V8 and starts behind the catalytic converter. MY 1977 will need to report converter length in the check out process. Photo depicts the stock single cat-back system for 1976 Comet 4dr's with the stock 6cyl (2dr models require a different rear exhaust pipe).
- Starting behind the converter, this system consists the rear exhaust pipe, front muffler, connector pipe, and rear muffler w/tailspout.