- This cat-back single exhaust consists of the rear exhaust pipe, single in/single out transverse muffler, and tailpipe.
-
This listing covers MY's 1975, 1976, 1977, 1978, & 1979 Omega's with the stock V8 260ci or 6 cyl and starts behind the catalytic converter. If pipes forward of the converter and/or converter are needed, give us a call for availability & pricing. -
This listing covers MY's 1975, 1977, 1978, & 1979 Omega's with the stock 350ci and starts behind the catalytic converter. Excludes 1976 models as those were stock with a single tailpipe (only). For that system, refer to SKU 428568.
- This cat-back single exhaust consists of the rear exhaust pipe, single in/dual out transverse muffler, and LS/RS tailpipes.
- If pipes forward of the converter and/or converter are needed, give us a call for availability & pricing.
-
This listing is for 1973 & 1974 Maverick's with the stock 6 cyl.
- Consists of the front exhaust pipe, rear exhaust pipe, transverse muffler, and tailpipe.
-
This listing is for 1973 & 1974 Maverick's with the stock V8 and a 1 muffler single exhaust.
- Consists of the cross-over pipe, front exhaust pipe, rear exhaust pipe, transverse muffler, and tailpipe.
-
- Single Exhaust consists of the cross-over pipe, exhaust pipe, resonator, connector pipe, transverse muffler, and tail pipe.
-
- System consists of the front exhaust pipe, rear exhaust pipe, resonator, connector pipe, and muffler w/tailspout.
-
- System consists of the 2 pc. Y pipe (cross-over and Y pipe), rear exhaust pipe, resonator, connector pipe, and muffler w/tailspout. 2 pc. Y pipe may be NORS.
-
Listing covers 1973 & 1974 Ford Maverick's with the stock 6 cyl. with muffler & resonator.
- System consists of the front exhaust pipe, center exhaust pipe w/resonator, rear exhaust pipe, and muffler w/ tail spout.
-
This listing is for 1940 & 1941 Hupmobile Skylark's with the stock 6 cyl. engine.
- Single exhaust consists of the front exhaust pipe, rear exhaust pipe (AKA over-axle pipe), transverse muffler, and tailpipe. Waldron's does not offer this exhaust pipe with a flange. You will want to save the original cast iron flange and reuse.
-
- This single exhaust system consists of the exhaust pipe (w/2 bolt flange), front muffler, connector pipe, and tailpipe with rear muffler built into the inlet end.
-
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension This muffler is designed to sit transverse under the vehicle. The body is round with a 6" diameter. The BL is 25¾" with an OA of 31". There is a single inlet at 2"ID and dual outlets at 1¾"ID. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
- Single exhaust system consists of the exhaust pipe, muffler, connector pipe (trim to fit), resonator, and tailpipe.
-
This listing covers MY's 1930, 1931, & 1932 Models DC & DG stock with the 8 cyl. and 1 muffler.
- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers 1963 Ford Thunderbirds with the stock V8 and a single exhaust.
- This single exhaust consists of the Y pipe (flange connected to the), rear exhaust pipe (flange connected to the), transverse muffler w/long outlet nipple, and short tailpipe.
- Systems starts out at 2" OD, increases to 2¼" OD where the 2 pipes connect on the Y and remains 2¼" through the rest of the system.
-
This listing covers model years 1932 and 1933 Franklin's with the stock 12 cyl. engine. For 1933 Olympics', models 18 or 18B, refer to listing 453478.- Single exhaust consists of the cross-over pipe, exhaust pipe, muffler and tailpipe.
-
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
This listing covers MY's 1975, 1976, 1977 & 1978 Suburban's stock with the 454ci. This dual exhaust system was stock with resonators.
- Dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailspout.
-
This listing covers MY's 1947, 1948, 1949, 1950, & 1951 Frazer's F47, F485, F486, F495, F496, F505, F506, F515 & F516 with the stock 6 cyl. Photo depicts the system for a 1948 Frazer with the stock 6 cyl. with a 1bbl carb.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe
- 1948 F486 will need to report 1bbl or 2bbl carburetor
- 1947-48 will need to report if built before or after SN27000
- If you opt to cut the system, know that both the exhaust pipe and tail pipe will be cut.
-
This listing covers MY's 1957, 1958, 1959, 1960, 1961, 19621, 1963 and 1964 Studebaker trucks with the stock 6 cyl.
- Complete system consists of exhaust, muffler and tailpipe.
-
Listing covers MY 1960, and 1961 Desoto's stock with the stock V8 and single exhaust. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust system consists of a Y pipe (which comes in 3 sections), muffler, and tailpipe. Y pipe may be NORS.
