- System consists of the exhaust pipe, muffler & tailpipe.
- For MY's 1960-62, please specify whether your vehicle has a short side exit tailpipe or a longer rear exit tailpipe during the check out process.
-
This listing covers model years 1960, 1961, 1962, 1963 with the stock 6 cyl., 1964, 1965, and 1966, stock with the 4 cyl. or the 6 cyl., 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, and 1979 Chevy C10, K10, C20, K20, C30, and K30's stock with the 6 cyl engine. Photo depicts the stock single exhaust for 1962 Chevy C10's Series 14 2WD with the stock 6cyl . -
This listing covers model years 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, and 1975 International trucks with the stock V8. Excludes 1966-68 C1100-1300, D1100-130, & C110-130 with 4WD. Photo depicts the system for MY's 1966-69 International trucks with the stock 304ci and 2WD (the tailpipe for this system was built in 2 sections to reduce the cost of shipping).- This single exhaust system consists of the crossover pipe, Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, and 1956 Ford F1, F2 & F3's stock with a 6 cyl. Photo depicts a 1950 Ford F1 6 cyl.- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, and 1966 Commander, President, Golden Hawk, Hawk, and Lark's with the stock V8 and single exhaust. Photo depicts the stock single exhaust for 1964 Commander Lark Station Wagon w/spin-on oil filter, w/o a sliding roof and the stock 289ci V8. Single exhaust consists of the crossover pipe, Y pipe, rear exhaust pipe, muffler, and from here it varies, some models have a tailpipe while others have a front and a rear tailpipe.- 1958 Sedans will need to report whether it is a “long wheel base sedan” or “except long wheel base sedan”.
- 1963 & 1964 Larks will need to report which type of filter is stock; spin-on filter or cartridge filter.
- 1964-66 Lark Station Wagons will need to report whether your SW has a sliding roof or not.
-
This listing covers model years 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, and 1946 President, Commander, and Dictator with the stock straight 8 and single exhaust. Photo depicts the stock single exhaust for 1938 Lincoln Presidents with the stock Straight 8- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Firebird, Firebird Trans Am, and Firebird Formula's stock with the V8 (except 455ci Super Duty) and dual exhaust. Photo depicts the system for 1970-72 Firebirds (Non HO or Ram Air).- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear (over-axle) exhaust pipes, dual in/dual out transverse muffler, and LS/RS tailpipes. Designed to fit with the stock chrome tips which are not included with the system.
- The standard engines take a system that starts out at 2"OD on the front exhaust pipes (with 2blt flanges), then increases to 2¼"OD on the rear exhaust pipes, and reduces back to 2"OD on the tailpipes.
- The Ram Air or HO systems are 2¼"OD up to the muffler inlets and then reduces to 2"OD on the tailpipes.
- You will be asked to report with or without RA or HO manifolds along with bolt pattern needed for RA/HO systems in the check out process. There will be an additional cost of $89.00 for the Ram Air / HO systems. If you need the cast iron flanges, you may add them to your order in the check out process. If you already have the need set, you will need to mail them to us in advance (address is shown in the check out form).
-
This listing covers model years 1961, 1962, 1963, and 1964 Bonneville, Catalina, Grand Prix, Star Chief, and Ventura's with the stock V8 and single exhaust. Photos depicts the exhaust system for 1963--64 Catalina's & Gran Prix's with the stock 389ci.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Barracuda's with the stock V8340ci, 383ci (1971 last yr.) , 340ci and 360ci and dual exhaust with resonators and mufflers. Excludes 1970-71 Barracuda's with a 426ci (stock w/H pipe), for that system refer to 438535. Photo depicts the stock dual exhaust for 1970-71 Barracuda Cuda's with the stock 383ci V8.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS over-axle pipe, LS/RS mufflers and LS/RS tips in the same material. We do not offer the stock chrome tips.
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, and 1971 Signet, Valiant, and Barracuda's with the stock V8 273ci or 318ci and single exhaust. Photo depicts the stock single exhaust for 1964-66 Plymouth Mid Size models with the stock 273ci or 318ci with a 2bbl carburetor.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- MY's 1964-69 do NOT require gaskets at the manifold.
- MY's 1970-71 DO require gaskets at the manifold.
-
This listing covers model years 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, and 1976 Signet, Barracuda, Duster, Scamp, and Valiant's with the stock 6 cyl engine and single exhaust with 1 muffler. Photo depicts the system for 1970 and 1971 Barracuda's with the stock 6 cyl. This system start off on the driver side and crossover to the passenger side. The exhaust pipe was built in 3 pcs. to reduce the cost of shipping.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
For Packard MY's 1955 and 1956 Patrician, Caribbean's, Executive, 400, Clipper Super & Custom's, this is a resonator eliminator option (for the stock system refer to listing 454498). Photo depicts the dual system for 1956 Executive, Clipper Super, & Custom's with a 352ci, torsion bar suspension and the stock resonator eliminated.- Dual exhaust system consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS muffler assembly, and LS/RS tailpipes.
- Our patterns for MY 1956 Clipper Super's, Custom's & Executive's are for models with torsion bar suspension.
- Shipping full length is the only option under this listing.
-
This listing covers model years 1954, 1955, and 1956 Olds 88 and 98 with the stock V8. Photo depicts the system for MY 1956 Olds Super 88.- Single exhaust system consists of the crossover pipe, exhaust pipe, muffler, and tailpipe.
- Regarding 1954 & 1955 models; if ordering the system in T409 SS, the cross-over pipe will be built in 2 pcs. If ordering an aluminized steel system, the cross-over pipe will be NORS.
