-
Out of stock
This muffler hanger is used on most 1941-66 Chevy trucks and on 1959-66 GMC trucks & vans. The strap is made of stainless steel. Currently unavailable. -
This listing covers MY's 1966, 1967, 1968, & 1969 Pontiac Custom, GTO, Lemans, & Tempest with Ram Air or High Output, 1970 models with Ram Air, and 1971-72 models with High Output. If your MY 1966, 1967, or 1969 was stock with 4 mufflers, refer to listing 453477. For systems w/o RA or HO, refer to listing 453210. Photo depicts the stock dual exhaust system for 1967 Pontiac Lemans, Tempest, and Custom with RA or HO manifolds on the stock 400ci V8 & standard transmission (this is a resonator eliminator system for 1967 GTO's with RA or HO & STD trans).- This dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- This system starts out at 2¼"OD on the exhaust pipes which reduce to 2"OD at the muffler inlets and then increases to 2¼" OD at the tailpipes.
- For MY's 1970-72, this system does not include the chrome tips but will be designed to fit up to the stock tip design.
- If the cast iron flanges are needed, add them to your cart for an additional $45.00.
- Metal-to-metal connection at the manifolds. Gaskets are not required.
-
This listing covers MY's 1968, 1969, 1970, 1971, 1972, 1973 and 1974 Mercury Cougar's & GT's with their respective stock V8: 302ci, 390ci, 427ci, 428ci, 351ci, 429ci, or 460ci. Photo depicts the system for a 1969 Cougar with the stock 351W.- For MY's 1968-73: This dual exhaust system consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. H pipe may be NORS.
- For MY 1974: This dual exhaust consists of the H pipe, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers MY's 1962, 1963 Mercury Meteor's & 1963, 1964, & 1965 Comet (including Cyclone and Caliente's) with their respective stock V8; 221ci, 260ci, or 289ci. 1965 . Photo depicts the system for 1965 Comet's.- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailspout. Y pipe may be NORS.
- Comet's with the 4bbl carburetor were stock from the factory with a resonator built into the tailpipe. Waldron's does not have the needed pattern for the 4bbl set-up, so this listing is a resonator delete system.
-
This listing covers MY's 1965, 1966, 1967, 1968, 1969, and 1970 Mercury Monterey's, Commuter's, Colony Park's, & Montclair with their respective stock V8, 390ci, 427ci, 410ci, and 428ci. Excludes Station Wagons which are available with a single exhaust only. The 429ci is not listed due to lack of pattern on the H pipe. Aftermarket companies didn't reproduce. We can help you with mufflers and tailpipes, contact us for pricing. Photo depicts the system for 1968 Marquis', Monterey's, Montclair's, and Parklane's with the stock 428ci.- MY's 1965-68: System consists of the H pipe, LS/RS mufflers, and LS/RS tailpipes.
- MY 1965 Station Wagon: System consists of the H pipe, LS/RS mufflers, LS front, center & rear exhaust pipes, and RS front & rear (that connects to the LS) tailpipes.
- MY 1969: System consists of the H pipe, LS/RS mufflers, LS/RS front and rear tailpipes.
- H pipe may be NORS
-
Photo is correct to the listing.- 1962 & 1963 Olds Jetfire Turbo 2nd Design single exhaust system consists of the front exhaust pipe (AKA cross-over pipe), center exhaust pipe (AKA turbo outlet pipe), rear exhaust pipe, connector pipe (AKA over-axle pipe), single in/dual out transverse muffler, and LS/RS tailpipes.
- Waldron's Exhaust also has the turbo inlet pipe available for $60.00 or in T409 SS for $99.00. Simply add it to your cart, if needed.
-
This listing covers MY's 1960, 1961, 1962, 1963, 1964, 1965, and 1966 GMC ½T 1000, ¾T 1500, and 1T 2500's with the stock V6 305ci with 2WD. Excludes 4WD's. Photo depicts the stock single exhaust for 1963 GMC with the stock 305ci V6 & 2WD (except 7' panel truck & Suburban which require a different tailpipe).- Single exhaust system consists of cross-over pipe, Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, and 1959 GMC 1½T's with the stock 6 cyl. Photo depicts the single exhaust system for 1955-58 GMC truck models 100-24, 150-24, 250-24 & PM250-24 with the stock 6 cyl- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Flange is not included with this exhaust pipe. Reuse original cast iron flange (if possible).
-
This listing covers model years 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 GMC's with the stock 6 cyl 228ci or 248ci.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- This exhaust pipe will not come with the cast iron flange. You will need to reuse your flange. Nor do we have a gasket available.
- The OE muffler hanger, available in checkout, is for MY's 1941-53. It is not OE correct for MY's 1939-40. Currently NA
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, and 1949 Chevy trucks stock with the 6 cyl and single exhaust. The photo is correct to the listing.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- Please specify the vehicle series through the checkout process.
-
This listing covers model years 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, and 1975 International trucks with the stock V8. Excludes 1966-68 C1100-1300, D1100-130, & C110-130 with 4WD. Photo depicts the system for MY's 1966-69 International trucks with the stock 304ci and 2WD (the tailpipe for this system was built in 2 sections to reduce the cost of shipping).- This single exhaust system consists of the crossover pipe, Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
Listing covers MY's 1935, 1936, 1937, 1938, 1939, 1940, and 1941 Ford ½T Trucks with the stock flathead V8. Convert your flathead Ford to dual exhaust with Waldron's exclusive Dual Conversion kits! Complete kit bolts on to the stock manifolds. Not available for 1933-34, 1942-47 or 1953 MY's.- Dual conversion kit consists of the exhaust pipes, custom-built glasspacks, tailpipes, blocker plate, gaskets and clamps. Gaskets & steel clamps are included. After 1949, the RS exhaust requires blocking plate which will be included in the system. Universal hangers can be added to the cart, if needed. Period specific hangers are N/A.
- The system goes through existing holes in the crossmembers. LH exhaust pipe starts at 1 ½”OD and opens to 2”OD at the glasspack inlet. RH exhaust pipe 2” OD throughout. Tailpipes are either 1 5/8” or 1 ¾” depending on the material selected & MY.
- If you would prefer mufflers (over glasspacks), you may make that change to your order in the check out process. Additional cost of $115.00 for aluminized steel or $230.00 for T409 SS.
Questions? Call Us Today! (269) 467-7185 or (800) 503-9428
