- The system consists of the exhaust pipe, muffler and tailpipe. The system does NOT come with the "clam shaped" clamp needed at the manifold. If needed, give American Parts Depot a call.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, 1961, and 1962 Metropolitan's with a 4cyl engine. Photo shown is correct to this listing. -
This listing covers model years 1950, 1951, 1952, 1953, and 1954 Nash with the L Head 6 cyl. Excludes the 1950-54 Nash-Healey which is NA. Photos depicts the single exhaust system for 1950-51 Nash Statesman's with the stock L-Head 6cyl.- This single exhaust consists of exhaust pipe, muffler, and tailpipe. Exhaust pipe may be NORS.
- The exhaust pipe serves as the manifold and clamps directly to the cylinder head. Waldron's does not carry the needed clamps.
-
This listing covers model years 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Nash Ambassador & 600 Series with an L head. This application does not have an exhaust manifold. The exhaust pipe serves as the manifold and clamps directly to the cylinder head. Waldron's does not carry the needed clamps. Photo depicts the stock single exhaust system (tailpipe varies between MY's) for 1941-48 Nash Ambassador's with the stock L-head 6 cyl.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1936, 1937,1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, and 1949 Nash Ambassador's with an OHV 6 engine. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- This single exhaust system consists of the exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1936, 1937, 1938, 1939 & 1940 Nash Lafayette with a L-HE flathead 6. Photo depicts the single exhaust for 1940 Nash Lafayette with the stock L-Head 6cyl engine.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- This application does not have an exhaust manifold. The exhaust pipe serves as the manifold and clamps directly to the cylinder head. Waldron's Exhaust does not carry the needed clamps.
-
This listing covers model years 1948, 1949, 1950 & 1951 Ford F4's, F5's, & F6's with the stock 6cyl engine. Photo depicts the stock single exhaust for 1948-51 Ford F4-F6's with the stock 6cyl engine.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers 1924, 1925, 1926, and 1929 Franklins with the stock 6 cyl. Photo depicts the stock single exhaust for 1924-26 Franklins with the stock 6 cyl.- This single exhaust system consists of a cross-over pipe, exhaust pipe, muffler and tailpipe.
- For 1927, 1928, & 1930-33 Franklin's, refer to listing 518776.
- For 1933 Olympics', models 18 or 18B, refer to listing 453478.
-
Photo is correct to the listing and fits 1929, 1930, 1931 & 1932 Jordan Model G 90 Series with the stock straight 8.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
- This model has the 125"WB
- This system starts out at 2¼"OD and reduces down to 1¾"OD at the tailpipes.
-
This listing covers 1940, 1941, & 1942 Willys Americar with the stock 4cyl engine. Photo is correct to the listing.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers 1994, 1995 & 1996 Chevy Caprice Sedan's, Classic Wagon's, Impala SS' & Police Car with the stock 5.7L 350P V8 and starts behind the converters. If the converters are needed, please call us at 1-800-503-9428 for availability and pricing. Photo is correct to this listing.- This cat-back dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with tailspout.
-
This listing covers 1994, 1995 & 1996 Chevy Caprice Sedan's, Classic Wagon's, Impala SS' & Police Car with the stock 5.7L 350 V8 and starts behind the converters. If the converters are needed, please call us at 1-800-503-9428 for availability and pricing. Photo is correct to this listing.
- This cat-back dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with tailspout.
-
This listing covers 1994,1995 & 1996 Cadillac Fleetwood Brougham's with the stock 5.7L 350 V8 including Commercial Chassis and starts behind the converters. If the converters are needed, please call us at 1-800-503-9428 for availability and pricing. Photo is correct to the listing.
- This cat-back dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with tailspout.
-
This listing covers model years 1929, 1930, and 1931 Model A's. Photo depicted is correct to the listing.- This is a one piece unit and consists of the exhaust pipe, tapered muffler and tailpipe. Available in aluminized steel, only.
- Exhaust pipes does not take a flange, it has a flare that uses a special nut which is not provided.
-
This listing covers 1968, 1969, 1970, 1971 & 1972 Buick Skylark & Special's with the introduction of the Century & Regal's in 1973 & 1974 stock with a V8 and single exhaust.- Stock single exhaust system consists of the Y pipe, rear exhaust pipe, muffler & tailpipe. Metal-to-metal connection at the manifolds, no gaskets required.
-
Photo depicts the system for this listing.- The single exhaust for the Super 6 consists of exhaust pipe, muffler and tailpipe. The exhaust pipe is 2"OD and reduces to 1¾"OD at the tailpipe.
- Exhaust pipe will come with a steel 3blt flange. The original was cast iron. If you have the original cast iron flange and would like to reuse it, you will need to send it to us in advance of the system being built.
-
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe. The exhaust pipe will come with a universal flange. If you have the original cast iron flange, keep and reuse it.
-
This listing covers MY's 1948, 1949, 1950 & 1951 Ford F7's and F8's with the stock V8.
- Single exhaust system consists of the cross-over pipe, Y pipe, muffler and short tailpipe.
-
This listing covers MY's 1975 & 1976 Ford Bronco's with the stock V8. This single exhaust was stock without a catalytic converter. Photo depicted is correct to the listing.- Single exhaust system consists of the Y pipe, muffler, and tailpipe. Ford offered this system with either 2" OD or 2¼" OD tailpipes. You will be asked to tell us which you would like your system to be built with in the check out process.
-
This listing covers model years 1963 and 1964 Fairlane's stock with the V8 4bbl carburetor single exhaust.
- Single exhaust system consists of the Y pipe, rear exhaust pipe, and muffler with turndown. Y pipe may be NORS.
- System starts out at 2" and increased to 2½" (and stays 2½") where the Y pipe joins together.
-
This listing covers MY's 1975, 1976, 1977, 1978, & 1979 Omega's with the stock V8 260ci or 6 cyl and starts behind the catalytic converter. If pipes forward of the converter and/or converter are needed, give us a call for availability & pricing.
- This cat-back single exhaust consists of the rear exhaust pipe, single in/single out transverse muffler, and tailpipe.
-
This listing covers MY's 1975, 1977, 1978, & 1979 Omega's with the stock 350ci and starts behind the catalytic converter. Excludes 1976 models as those were stock with a single tailpipe (only). For that system, refer to SKU 428568.
- This cat-back single exhaust consists of the rear exhaust pipe, single in/dual out transverse muffler, and LS/RS tailpipes.
- If pipes forward of the converter and/or converter are needed, give us a call for availability & pricing.