- Single exhaust system consists of front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1929, 1930, 1931, 192, 1933, 1934, 1935, 1936, 1937, 1940, and 1941 Grahams. Excludes 1938-39 Standard 6 since we do not have the needed patterns for this system. For 1938-39 Supercharged 6, see listing 518778 for a Supercharged 6 system. Photo depicts the system for a 1930 Graham Paige. -
This listing covers model years 1962, 1963, 1964, and 1965 Fairlane's stock with the V8 and single exhaust. If your 1963 or 1964 Fairlane was stock with a 4bbl carburetor, refer to SKU 518897. Photo is correct to the listing & reflects a system where the customer opted to save on shipping and had the rear exhaust pipe cut. Parts vary between MY's, engine, and carburetor set up.- Single exhaust system consists of the Y pipe, rear exhaust pipe, and muffler with turndown. Y pipe may be NORS.
- MY 1962 with the 221ci will need to report whether the system was stock at 1¾" (Y pipe is flared to 2" at the manifold and runs 1¾" throughout) or 2" (throughout) in the check out process. 1963-65 models are all 2" throughout.
- MY 1963 will need to report Early or Late model; early MY '63 took a muffler with a 25" body length while the late model year system took a muffler with a 27" body length.
-
This listing covers model years 1975 and 1976 Mustangs with the stock 4 cyl and starts behind the catalytic converter.- Single exhaust consists of rear exhaust pipe, front muffler, over-axle pipe, rear muffler, and tailpipe. If front exhaust w/converter is needed, please contact us for pricing and availability.
-
Covers 1975 and 1976 Coronet and Charger with a 440ci and dual exhaust. LS/RS exhaust pipes with catalytic converters are not available. This listing allows you to eliminate the stock resonators.
- We offer the LS/RS mufflers, LS/RS over-axle pipes, and LS/RS resonator eliminator pipes.
-
Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- This single cat-back system consist of the rear exhaust pipe, single in/dual out transverse muffler and LS/RS tailpipes. If parts forward of this cat-back system are needed, please contact us for price and availability.
-
This listing covers model years 1985, 1986, 1987, 1988, and 1989 Camaro's stock with the 6 cyl and 2 tailpipes. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Single cat-back consists of the rear exhaust pipe, single in/dual out transverse muffler, and LS/RS tailpipes. If parts forward of this cat-back system are needed, please contact us for price and availability.
-
This listing covers model years 1982, 1983, 1984, 1985, 1986, 1987, 1988, and 1989 Camaro's with stock V8 single exhaust with 2 tailpipes. This listing includes 1985 Z28. Photo depicts the cat-back single exhaust with 2 tailpipes for 1984 Camaro's (except Z28) with the stock 305H 5.L V8.- Single cat-back exhaust system begins behind the catalytic converter and consists of the rear exhaust pipe, single in/dual out transverse muffler, and LS/RS tailpipe. If parts forward of this cat-back system are needed, please contact us for price and availability.
-
This listing covers model years 1975, 1976, 1977, 1978, and 1979 Nova V8 with the transverse muffler and 2 tailpipes. Photo depicts the stock cat-back single exhaust for 1975-79 Chevy Nova's with the stock V8 and dual tailpipes.- Cat Back exhaust system begins behind the catalytic converter and consists of the rear exhaust pipe, single in/dual out transverse muffler, and LS/RS tailpipes.
-
This listing covers model years 1986, 1987, 1988, 1989, 1990, and 1991 Eldorado's. Excludes the Sport Exhaust which has tailpipes. Photo depicts the stock cat-back single exhaust for 1988-89 Eldorado's.- Cat-back single exhaust system consists of rear exhaust pipe, connector pipe, single in/out transverse muffler, tailpipe. If front exhaust, center exhaust and/or converter are needed, please call for pricing and availability.
-
This listing covers model years 1986, 1987, 1988, 1989, 1990, 1991, 1992, and 1993 Deville's and Fleetwood Brougham's with V8 and single exhaust. Photo depicts the stock cat-back single exhaust for 1993 Fleetwood Broughams with the stock 5.7L with all parts being NORS.- Single exhaust cat-back system consists of rear exhaust pipe, muffler, connector pipe, resonator and tailpipe.
- All or some parts may be NORS.
-
This listing covers model years 1982, 1983, 1984, 1985, 1986, 1987, 1988 and 1989 Lincoln Town Car's and 1982 & 1983 Lincoln Continental Mark VI's with the stock V8 302ci and dual exhaust with mufflers and resonators. 2dr. models only. Photo depicts the stock dual cat-back system for 1982-88 Lincoln Town Car's & Mark VI's 2drs. with the stock 302ci. All parts in photo are NORS.- This dual exhaust system starts behind the catalytic LS/RS converters and consists of the H pipe, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonator w/tail spout.
- All or some parts may be NORS.
- System is 2" OD throughout.
- H pipe is NA for 4 dr. systems. Contact us if you have an OE H pipe on your 4dr. system and let's see what we can do for you.
-
Photo depicts the system for this listing.- The single exhaust for the Super 6 consists of exhaust pipe, muffler and tailpipe. The exhaust pipe is 2"OD and reduces to 1¾"OD at the tailpipe.
- Exhaust pipe will come with a steel 3blt flange. The original was cast iron. If you have the original cast iron flange and would like to reuse it, you will need to send it to us in advance of the system being built.
-
This listing covers MY's 1975, 1976, 1977, 1978, & 1979 Omega's with the stock V8 260ci or 6 cyl and starts behind the catalytic converter. If pipes forward of the converter and/or converter are needed, give us a call for availability & pricing.- This cat-back single exhaust consists of the rear exhaust pipe, single in/single out transverse muffler, and tailpipe.
-
This listing covers model years 1986, 1987, 1988, and 1989 Toronado's except the Toronado Trofeo.
- Single cat-back exhaust consists of the center exhaust pipe, rear exhaust pipe, single in/single out transverse muffler and tailpipe. If the converter and/or pipes forward of cat are needed please contact us for pricing and availability.
-
This listing covers model years 1986, 1987, 1988, and 1989 Delta 88's and 98 Royale's with the stock V8 and single exhaust with no resonator.
- Single cat-back exhaust consists of the center exhaust pipe, rear exhaust pipe, muffler, and tailpipe. If the converter and/or pipes forward of cat are needed please contact us for pricing and availability.
-
This listing is for 1975, 1976, and 1977 Cutlass' with the stock 6 cyl or V8 and begins behind the catalytic converter. Photo depicts all but the catalytic converter for a 1976 Olds Cutlass 2 dr. with the stock 350ci w/4bbl carb.- Single cat-back exhaust consists of the rear exhaust pipe, muffler, and tailpipe.
- If the converter and/or pipes forward of the converter are needed, please contact us for pricing and availability.
-
This listing covers model years 1952, 1953, 1954, and 1955 Hudson 6B Commodore, Jet, 7B, 7C, 7D Hornet, 4C, 4D Wasp, 5B Wasp, 5D, 5D Super Wasp, 1C, 2C, 2D, 3D, (1955) Wasp and Hornet's stock with the 6 cyl single exhaust with muffler and resonator. Photo depicts the system (except rear exhaust pipe varies between models) for 1952-54 Hudson's.- For MY's 1952-54, this single exhaust system consists of the exhaust pipe, front muffler, connector pipe, rear muffler, and tailpipe.
- For a 1955 Hornet, this single exhaust consists of the exhaust pipe, front muffler, over-axle pipe, and resonator with tailpipe.
- For 1955 Wasp, this single exhaust consists of the exhaust pipe, front muffler, rear muffler with long inlet pipe, and tailpipe.
-
- Single exhaust consists of the exhaust pipe, front muffler, connector pipe, rear muffler, and tailpipe.
-
This listing covers model years 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, and 1989 Buick Century and Regal's with 4 cyl., V6 or V8.
- This cat-back system consists of rear exhaust pipe, muffler and tailpipe. Metal-to-metal connection at the converter, no gaskets required. If the Y pipe and/or the converter are needed, please call us for pricing and availability.
-
This listing covers model years 1949, 1950, 1951, and 1952 Buick's 8 cyl. Photo depicts the stock exhaust for 1949 Series 70 Roadmaster's.- MY 1949 this single exhaust consists of the front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
- MY's 1950-52 this single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers the model year 1953 Buick Specials with the straight 8. Photo depicted is correct to the listing.- Single exhaust system includes exhaust pipe, muffler and tailpipe. Due to muffler length, this muffler is built in 2 pcs. and will have a bead weld around the center of the muffler.
-
- Stock single exhaust consists of the exhaust pipe, resonator, connector pipe, and muffler w/tailspout.
-
Photo is correct to the listing and fits 1929, 1930, 1931 & 1932 Jordan Model G 90 Series with the stock straight 8.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
- This model has the 125"WB
- This system starts out at 2¼"OD and reduces down to 1¾"OD at the tailpipes.
-
This listing covers model years 1935, 1936, 1937, 1938, 1939, 1940, and 1941 Ford ½T's with the stock flathead V8. Photo depicts the stock single exhaust for 1940 Ford ½T trucks with the stock 239ci flathead V8.- Single exhaust consists of the crossover pipe, Y pipe, muffler, and tailpipe.