- Ram Induction dual exhaust system consists of LS/RS front exhaust pipes (AKA preheater tubes), LS/RS center exhaust pipes, cross-over (these 5 pipes make up an "H" pipe), LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipe along with the 1&1/8" clamps needed at the preheater tubes.
-
Photo depicted is for a 1960-61 Chrysler and is posted here since these systems are very similar in configuration (but require different parts). -
This listing covers model years 1960, 1961, 1962, 1963, and 1964 Belvedere, Savoy, and Fury's with the stock V8 and dual exhaust. Excludes 1962's with a 413ci & 1963-64's with a 426 HP. Photo depicts the system for 1962 Belvedere, Savoy, and Fury's with the stock 383ci.- For MY's 1960-61 with a 383ci or 361ci this exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- For MY's 1960-61 with a 318ci, 1962-64 (all engines but 413ci or 426ci HP); this dual exhaust consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Savoy, Belvedere, Satellite, and Fury's with the stock V8 and single exhaust. For some applications this is a resonator eliminator option. Photo depicts the stock single exhaust for 1971 Satellites (w/4drs.) & 1972 Satellites (all models) with the stock 318ci.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1967 GTX, 1968, 1969, and 1970 GTX and Road Runners stock with a 440ci or a 426ci. Photo depicted is correct to the listing.- Dual exhaust consists of the H pipe (2 pc.), LS/RS mufflers, and LS/RS tailpipes.
- This system starts out at 2½" and reduces down to 2¼" at the outlet ends of the H pipe and stays 2¼" through out the tailpipes.
- MY's 1968-1970 will be asked to select the desire tailpipe exit; with turndowns or with straight exit to be used with tips.
-
This listing covers model years 1970, 1972, 1973, and 1974 Fury's that were stock with a dual exhaust. No dual exhaust available for a 318ci or a 360ci V8, stock single exhaust only. Photo depicts the stock dual exhaust for 1973 Plymouth Fury's with the stock 440ci.- On some models this dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes while other models have a LS/RS front exhaust pipe, LS/RS rear exhaust pipe, LS/RS mufflers, and LS/RS tailpipes.
-
Satellite's were stock with 318ci, 360ci or 400ci. Fury's were stock with 360ci, 400ci, and 440ci. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust system consists of the Y pipe, front muffler, connector pipe, rear muffler and tailpipe.
-
- This dual exhaust consists of the RS exhaust pipe, LS front and rear exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with tailpipes.
-
This listing is for 1975 and 1976 Gran Fury and Fury's that were stock without a catalytic converter. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- The single exhaust for a 1975/1976 Gran Fury consists of the Y pipe, rear exhaust pipe, muffler, over-axle pipe, and resonator with tailpipe.
- The single exhaust for a 1975/1976 Fury consists of the Y pipe, muffler, over-axle pipe, and resonator with tailpipe.
-
This listing covers model years 1975 with the stock 6 cyl engine, 1976, 1977, and 1978 Gran Fury, Fury, and Road Runners (including station wagon) stock with the 6 cyl or V8. 1975's stock with the V8, this is a resonator eliminator option. For the stock set up refer to listing 438526. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- For all but 1975 w/V8 this single cat back will consist of the rear exhaust pipe, muffler, and tailpipe.
- For 1975 w/V8 this single cat back will consist of the rear exhaust pipe, muffler, connector pipe, and resonator eliminator pipe.
- If pipes forward of converter and/or converter are needed, please contact us for pricing and availability.
-
This listing covers model years 1975, 1976, 1977, and 1978 Road Runner, Fury, and Gran Fury's with the stock V8 and single exhaust stock with muffler and resonator. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single cat-back exhaust consists of the rear exhaust pipe, muffler, over-axle pipe, and resonator with tailpipe.
-
- Dual cat-back exhaust consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. If pipes forward of converters and/or converters are needed please contact us for pricing and availability.
-
This listing is a stock set up for 1975 and 1976 Gran Fury's with the stock 400ci or 460ci that were stock from the factory without catalytic converters. For 1975 and 1976 Road Runner's or Fury's (stock without catalytic converter but stock with 4 mufflers) this is a resonator eliminator option. For the stock set refer to listing 438529. Photo depicts the stock dual exhaust for 1975 Plymouth Fury or Roadrunner's with the stock 400ci with stock resonators eliminated.- This dual exhaust consists of the LS front exhaust pipe, LS rear exhaust pipe, RS exhaust pipe, LS/RS mufflers, LS/RS connector pipes and LS/RS resonator eliminator pipes.
-
This listing is the stock set up for these models without converters and with the stock 440ci, 400ci, and 360ci. For the resonator eliminator option, refer to listing 438528.
- This dual exhaust consists of LS front and rear exhaust pipe, RS exhaust pipe, LS/RS mufflers, LS/RS over-axle pipes, LS/RS resonators, and short tailpipes.
-
- This single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, resonator w/long inlet pipe, and tailpipe.
-
This listing covers model years 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, and 1976 Signet, Barracuda, Duster, Scamp, and Valiant's with the stock 6 cyl engine and single exhaust with 1 muffler. Photo depicts the system for 1970 and 1971 Barracuda's with the stock 6 cyl. This system start off on the driver side and crossover to the passenger side. The exhaust pipe was built in 3 pcs. to reduce the cost of shipping.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, and 1971 Signet, Valiant, and Barracuda's with the stock V8 273ci or 318ci and single exhaust. Photo depicts the stock single exhaust for 1964-66 Plymouth Mid Size models with the stock 273ci or 318ci with a 2bbl carburetor.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- MY's 1964-69 do NOT require gaskets at the manifold.
- MY's 1970-71 DO require gaskets at the manifold.
-
Photo depicted is correct to the listing.- Dual exhaust system consists of the H pipe, LS/RS resonators, LS/RS connector pipes, LS/RS over-axle pipes, and LS/RS mufflers with tailspout or set up for tips. Let us know how you would like your system to exit in the check out process.
- This system starts out at 2½"OD and reduces to 2¼"OD as the H pipe goes into the resonators and stays at 2¼"OD until the muffler outlets where it reduces down to 2"ID.
- This system is a metal-to metal connection at the manifold and does not use gaskets.
-
This listing covers 1970-71 Barracuda's with the stock 318ci or 383ci and 1972, 1973, and 1974 Barracuda's with the stock 318ci. Photo depicts the stock single exhaust for 1970-71 Barracuda's with the stock 318ci.- Single exhaust system consists of the cross-over pipe, Y pipe, center exhaust pipe, rear exhaust pipe (over-axle), and muffler with short tailspout.
- Y will be NORS (will not be T409 stainless steel & T409 pricing has been set to reflect a NORS Y pipe).
- Systems with the 318ci do NOT require gaskets while the 383ci does.
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Barracuda's with the stock V8340ci, 383ci (1971 last yr.) , 340ci and 360ci and dual exhaust with resonators and mufflers. Excludes 1970-71 Barracuda's with a 426ci (stock w/H pipe), for that system refer to 438535. Photo depicts the stock dual exhaust for 1970-71 Barracuda Cuda's with the stock 383ci V8.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS over-axle pipe, LS/RS mufflers and LS/RS tips in the same material. We do not offer the stock chrome tips.
-
This listing covers model years 1970, 1971, 1972, 1973, and 1974 Duster's and Valiant's with the stock 340ci or 360ci V8 and dual exhaust. Photo depicts the stock dual exhaust system for 1971-73 Valiant's and/or Dusters with the stock 340ci V8.- Dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers model years 1972, 1973, and 1974 Valiant, Duster, and Scamp's with the stock 318ci engine. Refer to listing 438536 for Barracuda's.
- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1973, 1974, and 1975 (that were stock without a converter) Valiant, Duster, and Scamp's with the stock 318ci and single exhaust.
- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, connector pipe, and resonator with tailspout.
-
This listing covers model years 1973, 1974, 1975, and 1976 (stock without a catalytic converter) Valiant, Duster, and Scamp's with the stock 6 cyl. and single exhaust with 2 mufflers.
- Single exhaust consists of the exhaust pipe, muffler, over-axle pipe, and resonator with tailpipe.
-
Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- This single exhaust starts behind the catalytic converter and consists the rear exhaust pipe, muffler, over-axle pipe, and resonator with tailpipe. If Y pipe and/or converter are needed please contact us for availability and pricing.