- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators, and LS/RS rear tailpipes.
- Systems for the 283ci or 348ci engines require a 3 bolt formed flange, starts out at 2" and reduces to 1 and 7/8" at the muffler outlet. Systems for the 348HP engine require a 3 bolt flat flange, starts out at 2½" and reduces down to 2" at the muffler outlet. The will be an additional cost of $40.00 charged at the check out process for the 348HP systems.
- Our pattern exhaust pipes have the piece that some call an extension (we call an insert) incorporated into the exhaust pipes. If you would prefer to have this insert/AKA extension a separate part, you may choose so in the check out process.
-
This listing covers model years 1959 and 1960 Bel Air, Biscayne, and Impala's with the stock V8 283ci, 348ci or 348HP and a dual exhaust with 2 mufflers and 2 resonators. Photo depicts the stock dual exhaust system for 1960 9Passenger SW's with the stock non-HO 348ci. -
This listing covers 1959 & 1960 Edsel's (exc. 1960 convertible) with the stock 6 cyl. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- For MY 1959 the single exhaust consists of the exhaust pipe, muffler, and tailpipe. Listing covers all body styles.
- For MY 1960 the single exhaust consists of the front exhaust pipe, rear exhaust pipe, and muffler with tailpipe. Listing excludes Edsel convertibles.
-
This listing covers 1959 & 1960 Edsel Ranger, Corsair, & Villager Station Wagon's with the stock V8. Photo depicts the stock single exhaust for 1959 Edsel's with the stock V8 (this customer opted to cut the system).- For MY 1959 the single exhaust system consists of the Y pipe, muffler and tailpipe.
- For MY 1960 the single exhaust system consists of the Y pipe, rear exhaust pipe, and muffler with tailpipe.
-
- This single exhaust consists of the front exhaust pipe, rear exhaust pipe, front muffler, connector pipe, rear muffler, and tailpipe.
-
This is a set of 4 OEM correct hangers for MY's 1959 and 1960. These hangers are used at the muffler outlets and on the frame rail prior to the rear axle. This set does not include the hangers needed at the rear. Hangers generally will ship within 1 wk. -
This listing covers model years 1959, 1960, 1961, 1962 4bbl, 1964, 1965, and 1966 Thunderbird's. For MY 1962 with a 6bbl and 1963 T-birds, refer to 518724. Photo depicts the system for all 1961 Ford Thunderbirds.- For 1959-63 models this dual exhaust system consists of H pipe, LS/RS rear exhaust pipes with resonators, and LS/RS mufflers w/tailspouts.
- For 1964-66 models this dual exhaust system consists of H pipe, LS/RS rear exhaust pipes with resonators, and LS/RS mufflers built into the tailpipes.
-
This listing covers MY's 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 for Rebel, Ambassador, Classic, Marlin, American, Gremlin, Hornet, Javelin and AMX's with V8 and single exhaust. Photo depicts the system for a 1965 AMC Rambler Ambassador with the stock 327ci.- For MY's 1959-62 this single exhaust system consists of 2 pc. Y (cross-over & Y pipe), muffler and tailpipe.
- For MY's 1963-64 3 Seat Station Wagons this single exhaust system consists of 2 pc. Y (cross-over & Y pipe), rear exhaust pipe, muffler and tailpipe.
- For MY's 1963-74 (except the 3 Seat SW) this single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- Some Y pipes may be NORS.
-
This listing covers 1960 Edsel's with the stock V8 332ci & 361ci. The 292ci V8 was stock with a single exhaust (only). Listing excludes Ranger convertibles. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Dual exhaust consists of H pipe, LS/RS mufflers, and LS/RS tailpipes.
-
This listing is currently for a 1960 Edsel convertible with a 352ci. We do not have the exhaust pipe patterns needed for the 292ci.
- Dual exhaust consists of LS has front exhaust pipe, resonator, connector pipe, and muffler with tailpipe while RS has front exhaust pipe, rear exhaust pipe and muffler with tailpipe. No resonator on the RS.
-
This listing covers model years 1960 and 1961 Fairlane's (for 1962 & up refer to Ford Mid Size), 1960, 1962, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Galaxie, Starliner, and Custom's with a stock 6 cyl. Photo depicts the stock single exhaust for 1968 Full Size Ford's with the stock 240ci 6 cyl, except SW's.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1960 and 1961 Buick LeSabre, Invicta, Electra and Electra 225 with V8 dual exhaust and a transverse muffler. Photo depicts the stock dual exhaust for 1961 Buick Invicta's & LeSabre's with the stock V8.- The dual exhaust consists of the LS/RS front exhaust pipes (flange connected to the rear exhaust pipes), LS/RS rear exhaust pipes (flange connected to the transverse muffler inlets), dual in/dual out transverse muffler, and LS/RS tailpipes. Metal-to-metal connection at the manifolds, no gasket required.
-
Listing covers MY's 1960 and 1961 Chryslers stock with the Ram Induction setup. Photo is correct to the listing.- Ram Induction dual exhaust system consists of LS/RS front exhaust pipes (AKA preheater tubes), LS/RS center exhaust pipes, cross-over (these 5 pipes make up an "H" pipe), LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes along with the 1&1/8" clamps needed at the preheater tubes.
- The tailpipes are short on the 300; they end in front of the bumper and they are tucked up tightly under the trunk pan. You can’t see the tailpipe tips from the side of the vehicle.
- The tailpipe hangers attach at the radius of the turndown, not on a straight section of pipe. This is a Waldron's exclusive design.