- 1974 Ford Torino single & dual exhausts front tail pipe hanger
- 1974 Thunderbird single & dual exhausts front muffler outlet hanger
- 1974 Mark IV single & dual exhausts front muffler outlet hanger
- 1974 Montego single & dual exhausts front tail pipe hanger
- 1974 Cougar single & dual exhausts front tail pipe hanger
-
Waldron's Exhaust reproduces these OE correct hangers: -
Waldron's Exhaust reproduces these OE correct muffler hangers used on 1968 Fairlane's and Comet's stock dual exhaust. Simply order the amount needed. Hangers generally ship out within 1 wk. -
Waldron's Exhaust reproduces these OEM correct rear tailpipe hanger for 1968,1969, and 1970 Javelin's stock with a 6cyl, 1968, 1969, and 1970 AMX's and Javelin's stock with a V8 single and/or dual exhaust. Hangers generally will ship within 1 wk. -
The Mustang Arvinode hanger kit includes the 4 OEM style hangers, 4 Ford clamps, and 2 clamps used at the resonator. Hangers generally will ship within 1 wk. -
Our mufflers are a double walled shell. The end caps are roll-seamed. The outer wrap is smooth with no exposed welds. The baffles and end caps are a heavy gauge material.- This round muffler is stock with a body length of 27", stock inlet ID of 2", with tailspout and bracket welded in stock location.
-
This listing covers MY's 1966, 1967, and 1969 Pontiac GTO, Tempest, and Lemans' stock with a dual exhaust system with mufflers and resonators. 1968 all mid-size's & 1969 GTO's with a 400ci & standard transmission were all stock with mufflers only, for the correct system refer to listing 453475 if you have a HO or Ram Air set-up or 453210 for non-HO or Ram Air. Photos depicts the system for a 1969 GTO stock w/automatic transmission.- Dual exhaust consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, and LS/RS resonators with turndowns.
- In the check out process you will be asked to report w/ or w/o Ram Air or HO. There is an additional cost of $50.00 in aluminized steel or $100.00 in T409 for RA or HO. You will also be asked whether you have the cast iron flanges or if you need them added to your cart. If you already have the needed cast iron, you will need to send them to Waldron's in advance.
- 1966 & 1967 resonators are bullet style while 1969 resonators are cannister style.
-
This listing is for 1988 Mercury Cougars stock with the 302ci. Photo depicted is correct to the listing.- This single-into-dual exhaust system starts behind the converter. This consists of the NORS Y pipe (sits like a wishbone), LS/RS mufflers, and LS/RS tailpipes.
-
This listing covers MY's 1961, 1962, 1963, and 1964 Mercury Monterey's, Commuter's, Colony Park's, and Montclair's with the stock V8 292ci, 352ci, 390ci, 406ci, & 427ci. For convertibles go to see listing 453451. Photo depicts the stock dual exhaust system for 1963 Mercury Monterey's & Colony Park's with the stock 390ci V8, except for convertibles.- System consists of the H pipe, LS/RS rear exhaust pipes, and LS/RS mufflers w/hanger bracket and tailspout welded into the proper position.
-
This listing covers MY's 1949, 1950, 1951, 1953, and 1954 Mercury's with the stock flathead V8. Photo depicts the system for MY's 1949-51 Mercury's with the stock engine.- This single exhaust system consists of the cross-over pipe, exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, and 1948 Mercury's with the stock flathead V8. Photo shown is the stock single exhaust for a 1937 Ford without the heat exchanger (with TP cut to reduce shipping) & is posted so that you might see the quality of our craftsmanship and the type of bending.- For MY's 1941-48 this single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe.
- For MY's 1939-40: If your 1939-40 Mercury has the heat exchanger & you intend to reuse it; the system will consist of a cross-over pipe, exhaust pipe, muffler & tailpipe. If your 1939-40 doesn't have the heat exchanger or if it does have it but it is not reusable; the system will consist the 2 pc. Y pipe (AKA cross-over & Y pipe), muffler & tailpipe. You will be asked to report which setup you require in the check out process.
-
This listing covers MY's 1975, 1976, 1977, and 1978 Chevy C10, K10, C20, K20, C30, K30 & Suburban's with the stock 350ci, 400ci, & 454ci. For 1975-78 Suburban's with the 454ci this is a resonator eliminator option since all were stock with resonators. Photo depicts the stock dual exhaust for 1975 Chevy C10's with the stock 454ci.- Dual exhaust system for the 2 WD C Series consists of LS/RS exhaust pipes, LS/RS mufflers, & LS/RS tailpipes.
- Dual exhaust system for the 4 WD K Series & Suburban's consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers & LS/RS tailpipes.
-
This listing covers MY's 1967, 1968, 1969, 1970, 1971, and 1972 Chevy C10, C20, and C30's with the stock small block V8 327ci, 307ci or 350ci engine and lets you convert your small block Chevy, with the stock 45° angle manifolds, to dual exhaust. Photo depicts the dual conversion system for 1971-72 Chevy C20's ¾T 2WD with the stock 350ci V8 and 127"WB with rear leaf springs.- Dual exhaust conversion kit consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS glasspacks, and LS/RS tailpipes, along with the gaskets and clamps needed. Universal hangers are additional and can be added to your cart.
- Exhaust system is 2" throughout.