- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1973, 1974, 1975, 1976, 1977, and 1978 Wagoneer, Trucks, and Cherokee's stock with either a 232ci or 258ci 6 cyl engine. Photo depicts the system for a 1974 Jeep J10 w/119"WB (tailpipes vary between Cherokee, 119"WB & 131"WB). -
This listing covers MY's 1972-73 CJ5, CJ6, DJ5, & DJ6, 1974-75 CJ5 & CJ6, 1976-78 CJ5 & CJ7. Photo depicts the stock single exhaust for 1972-73 CJ5's and DJ5's with the stock 232ci 6cyl. and 2" tailpipe.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- MY''s 1972-73 will need to tell us what size tailpipe your CJ was stock with in the check out process.
- MY 1975 will need to be specific about 3 or 4 speed transmission in the check out process.
- MY 1978 will need to report with or without Power Take Off in the check out process
-
This listing covers model years 1914, 1915, 1916, 1917, 1918, 1919, 1920, 1921, 1922, 1923, 1924, 1925, 1926, 1927, 1928, 1929, 1930, 1931, 1932, 1933, 1934, 1935, 1936, 1937, and 1938 Dodge ½T, ¾T, and 1T trucks with either the stock 4 cyl or 6 cyl. Photo depicts the stock single exhaust for a 1935 Dodge ½T KC or HC with the stock 6cyl.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955 and 1956 Dodge ½T, ¾T and 1T trucks with the stock 6 cyl. Photo depicts the system for a 1939 Dodge ½T with the stock 6 cyl.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, and 1971 D100, D200 or D300 with the stock 6 cyl engine and 2WD. This listing excludes Dodge trucks with 4WD. Photo depicts the stock single exhaust for 1970-71 Dodge D100's with the stock Slant 6 225ci.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1961, 1962, and 1963 Dodge W100, W200, W300 and 1964 W100 and W200. Excludes 1964 W300. Photo depicts a system for 1961-64 Dodge W100, W200 and W300 with 4WD except for 1964 W300.- This single exhaust system consists of an exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, and 1969 Dodge D100, W100, D200, W200, D300, & W300's, 1970 & 1971 D100, D200, D300 & W300's stock with the V8 except the 383ci as the Y pipe for the 383ci has never been reproduced for this MY's. Give us a call to see what we can do for you at 800-503-9428. Photo depicts the stock single exhaust for 1967-68 D100 ½T's & D200 ¾T's Regular Cab with 127" WB and the stock 318ci V8- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
- For 1961-64 models, this system is for conventional cabs only.
- 1965-68 models will be asked to report the serial number. We will need to know if it falls before or after SN 166800. The difference being that early models require flat gaskets at the manifold while the later models are a metal-to-metal connection at the manifold.
- 1969-71 models will be asked to report whether the truck is stock with or without a cowl.
-
This listing covers model years 1972 D100 (excludes 1973 W100; no patterns available), 1973 and 1974 Dodge D100 & W100's, 1975, 1976, and 1977 Dodge D100 & W100's, and 1978 D100, W100, D150 & W150's stock without a catalytic converter and the 6 cyl engine.- MY's 1972-74 D100's this single exhaust consists of a front exhaust pipe, rear exhaust pipe, muffler, front tailpipe, and rear tailpipe.
- MY 1973 W100 single exhaust consists of front exhaust pipe, rear exhaust pipe, muffler, and tailpipe. MY 1975 both D100 & W100 system consists of a front exhaust pipe, rear exhaust pipe, muffler, and tailpipe.
- MY's 1976-77 both D100 & W100 systems consists of the front exhaust pipe, rear exhaust pipe, muffler, front tailpipe, and rear tailpipe.
- MY 1978 D100 & D150 system consists of a front exhaust pipe, center exhaust pipe, rear exhaust pipe, muffler, front tailpipe, and rear tailpipe while the W100 & W150 system consists of a front exhaust pipe, rear exhaust pipe, muffler, front tailpipe, and rear tailpipe.
-
This listing covers model years 1972, 1973, 1974, 1975, 1976, 1977 and 1978 D100, D200, W100, W200, and in 1978 W150. For MY's 1975-78 this is for exhaust systems without catalytic converters. Photo depicts the stock single exhaust for 1974 Dodge D200 ¾T with 2WD, 131"WB & the stock 360ci V8.- For MY's 1972-75 W100 & W200, 1972 D100 & D200, 1975 D100 & D200 single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- For MY's 1973-74 D100 & D200 single exhaust consists of the Y pipe, rear exhaust pipe, muffler, front tailpipe, and rear tailpipe.
- For MY's 1976-78 D100, D100 Club Cab, D200 & 1978 D200 Crew Cab single exhaust consists of the Y pipe, center exhaust pipe, rear exhaust pipe, muffler, front tailpipe, center tailpipe, and rear tailpipe.
- For MY's 1976-78 W100 & W200, 1976-77 W100 Club Cab & D200 Club Cab, and 1978 W150, W200 Club Camper, and D200 Club Camper single exhaust consists of the Y pipe, rear exhaust pipe, muffler, front tailpipe, center tailpipe, and rear tailpipe.
-
This listing covers model years 1972, 1973, 1974, 1975, 1976, and 1977 D300 and W300's with the stock V8. In MY's 1975-77, this is for trucks that were stock without a catalytic converter.
- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1909, 1910, 1911, 1912, 1913, 1914, 1915, 1916, 1917, 1918, 1919, 1920, 1921, 1922, 1923, 1924, 1925, 1926, and 1927 Model T's. Photo is correct to the listing.- Single exhaust consists of the exhaust pipe and muffler.
- Exhaust pipe does not take a flange, it has a flare that uses a special nut which is not provided.
-
Listing covers MY's 1935, 1936, 1937, 1938, 1939, 1940, and 1941 Ford ½T Trucks with the stock flathead V8. Convert your flathead Ford to dual exhaust with Waldron's exclusive Dual Conversion kits! Complete kit bolts on to the stock manifolds. Not available for 1933-34, 1942-47 or 1953 MY's.- Dual conversion kit consists of the exhaust pipes, custom-built glasspacks, tailpipes, blocker plate, gaskets and clamps. Gaskets & steel clamps are included. After 1949, the RS exhaust requires blocking plate which will be included in the system. Universal hangers can be added to the cart, if needed. Period specific hangers are N/A.
- The system goes through existing holes in the crossmembers. LH exhaust pipe starts at 1 ½”OD and opens to 2”OD at the glasspack inlet. RH exhaust pipe 2” OD throughout. Tailpipes are either 1 5/8” or 1 ¾” depending on the material selected & MY.
- If you would prefer mufflers (over glasspacks), you may make that change to your order in the check out process. Additional cost of $115.00 for aluminized steel or $230.00 for T409 SS.
-
This listing covers model years 1948, 1949, 1950, 1951, and 1952 Ford ½T, ¾T & 1T trucks with the stock flathead V8. Convert your flathead Ford to dual's with Waldron's exclusive Dual Conversion kits! Complete kits bolt on to the original manifolds. Photo depicts the dual conversion for 1948-52 Ford F1 with the stock V8- Dual conversion kit consists of the LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS glasspacks, LS/RS tailpipes, gaskets, and clamps.
- Period specific hangers are N/A. Universal hangers only. Hangers are not included in the kit but may be added to your cart.
- Exhaust pipes start out at 1&5/8" OD and increase to 2"OD immediately after the flange. Tail pipes are 1¾"OD.
- If you would prefer mufflers (over glasspacks), you may make that change to your order in the check out process.
-
For model years 1932, 1933, and 1934 Ford ½T with the stock 4 cyl engine. During the check out process be sure to let us know how your manifold exits; with a 45° angle or straight exit. System shown in the photo is correct to the listing.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Waldron's Exhaust does not send a flange with this exhaust pipe. Reuse the original 2 pc. cast iron flange when possible.
-
This listing covers model years 1932, 1933, and 1934 Ford ½T's with the stock flathead V8. Photo depicts the system for 1933-34 Ford ½T's with the stock V8- Single exhaust consists of the crossover pipe, Y pipe, muffler, front tailpipe and rear tailpipe.
-
This listing covers model years 1935, 1936, 1937, 1938, 1939, 1940, 0941, 1942, 1943, 1944, 1945, 1946, and 1947 F1, F2, and F3's with the stock 4 cyl or 6 cyl engine. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single exhaust system consists of exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, and 1953 Ford F1, F2, F3, F4, F5 and F6's stock with the V8 and single exhaust. Photo depicts the crossover pipe and Y pipe for 1942-52 F1, F2, & F3's with V8, the muffler and tailpipes vary.- Single exhaust system consists of the crossover pipe, Y pipe, muffler, and tailpipe.
-
This listing covers model years 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, and 1956 Ford F1, F2 & F3's stock with a 6 cyl. Photo depicts a 1950 Ford F1 6 cyl.
- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, and 1964 Ford F100, F250, and F350's with the stock V8 and single exhaust.
- Single exhaust system consists of the 2 pc. crossover pipe, exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Ford F100, F250, and F350 with the stock 6 cyl. Photo depicts the single exhaust system for 1967-68 F100's with the stock 6 cyl.- For all MY's and models (other than 1973-74 F350) this single exhaust consists of the exhaust pipe, muffler, and tailpipe.
- 1973-74 F350 single exhaust consists of the exhaust pipe, muffler, front tailpipe, and rear tailpipe.
-
This listing covers model years 1966, 1967, 1968, 169, 1970, 1971, 1972, 1973, and 1974 Ford Bronco's with the stock 6 cyl.
- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1965, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, and 1978 Ford F100, F250, and F350's with the stock V8. This listing excludes the 1973-77 trucks with the 460ci (for that system refer to listing 453306) and 1973-78 Super Cabs (for that system refer to listing 453305). For MY's 1975-78 these trucks were stock without a converter. Photo depicts the system for a 1969 F100 ½T with the stock 360ci V8.- This single exhaust system varies between models, model years and engines although most consists of a crossover pipe, Y pipe, muffler, and tailpipe. If you want to confirm exactly how your exhaust system is broken down, please give us a call. Y pipe may be NORS.
-
This listing covers model years 1973, 1974, 1975, 1976, 1977, and 1978 Ford F100 Super Cab, F250 Super Cab, and F350 Super Cab's with the stock V8. Excludes 1973-77 Ford trucks with a 460ci. Refer to listing 453306 for that system. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- This system consists of the Y pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1973, 1974, 1975, 1976, and 1977 Ford F100, F150, F250, and F350's stock with the V8 460ci engine.
- Single exhaust system consists of LS/RS exhaust pipes, dual in/single out inline muffler, and tailpipe.