- System consists of the front exhaust pipe, center exhaust pipe, rear exhaust pipe, and muffler w/tail spout.
-
Listing covers MY's 1970. 1971, 1972, 1973, & 1974 Maverick's with the stock 6 cyl. and 1 muffler. If your 1973-74 Maverick was stock with 2 mufflers, refer to 518892. Photo depicts the stock single exhaust for 1971-72 Ford Maverick 2dr. models with the stock 170ci or 200ci 6cyl. -
Listing covers 1975, 1976, & 1977 Ford Maverick's with the stock 6 cyl or V8 and begins behind the converter. Photo depicts the stock cat-back single exhaust for 1977 Ford Mavericks with the stock 250ci 6cyl with the 12" catalytic converter.- Cat-back system consists of the rear exhaust pipe, resonator, connector pipe, and muffler w/tail spout.
- MY 1977 will need to report stock catalytic converter body length (7¼" or 12") in the check out process.
- If you are in need of the pipes forward of the converter and/or the converter, please give us a call for availability and pricing.
-
This listing covers MY's 1932, 1933, 1934 & 1935 Lincoln K Series stock with the V12. Photo depicts the stock single exhaust for 1932-33 Lincoln K Series with the stock V12- Single exhaust consists of the exhaust pipe, muffler, and tailpipe. Original exhaust pipe was 2¾"OD. In reproduction it will be 2"OD flared to 2¾"OD with a flat flare. We do not have the needed gasket available or the proper flange for this connection. If you have the original cast iron flange, you will want to reuse it.
-
This listing covers 1936 & 1937 GMC ½T trucks with the stock Olds 213ci 6 cyl. Photo shows the stock single exhaust system for 1936-37 GMC ½T's with the Olds 213ci where the muffler sits outside the frame rail.- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
- Waldron's does not have the gaskets available for this system.
- In the ordering process, you will be asked to report where the muffler sits on your system (inside or outside of the frame rail),
-
Photo is correct to this stock dual exhaust listing.- Stock Dual exhaust system includes LS/RS exhaust pipes, LS/RS resonators, LS/RS connector pipes, dual in/dual out transverse muffler and LS/RS tailpipes.
- Stock pipe diameter is 2¼"OD through out.
-
This listing covers model years 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965 & 1966 American's with stock the L Head cyl. Photo depicts the system for 1965-66 American's with the stock 6 cyl L head.- Single exhaust system consists of an exhaust pipe, muffler and tailpipe.
- Waldron's does not provide the clamps needed to attach the manifold pipe to the engine nor do we have the needed gasket available. Give us a call for contacts, if needed.
-
This listing covers model years 1957, 1958, 1959, 1960 Rambler American, 1961, 1962, 1963, 1964 Rambler, American & Classic, 1965 & 1966 American, Classic along with Nash Marlin & Ambassador stock with the OHV 6 cyl. Photo depicts the stock single exhaust for 1964 AMC American's stock with the OHV 6cyl 196ci (except convertibles & station wagons).- For MY's 1957-63 (exc. 1962-63 convertibles) this single exhaust system consists of the exhaust pipe, muffler, and tailpipe. 1962-63 convertibles take a front exhaust pipe, rear exhaust pipe, muffler, and tail pipe.
- For MY's 1964-66 these single exhaust systems vary between models and body styles, with some set-ups having a transverse muffler.
- MY's 1957-60 all body styles except station wagon's need to report whether the car was stock with or without a wheel carrier.
-
This listing covers model years 1956, 1957, and 1958 Century, Special and Super's. Photo depicts the system for a 1956 Buick Special Model 41 (with the tailpipe cut)- Single exhaust system consists of Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1960 and 1961 Buick LeSabre, Invicta, Electra and Electra 225 with V8 dual exhaust and a transverse muffler. Photo depicts the stock dual exhaust for 1961 Buick Invicta's & LeSabre's with the stock V8.- The dual exhaust consists of the LS/RS front exhaust pipes (flange connected to the rear exhaust pipes), LS/RS rear exhaust pipes (flange connected to the transverse muffler inlets), dual in/dual out transverse muffler, and LS/RS tailpipes. Metal-to-metal connection at the manifolds, no gasket required.
-
This listing covers model year 1962, 1963, and 1964 LeSabre, Wildcat, and Electra's with stock V8 and dual exhaust. Photo depicts the system for a 1963 Buick Wildcat / LeSabre. Pipes will vary depending on transmission and body style.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS resonators, LS/RS front connector pipes, LS/RS rear connector pipes, dual in/dual out transverse muffler and LS/RS tailpipes. Metal-to-metal connection at the manifolds, no gaskets required at the manifolds. These systems DO require gaskets at the muffler inlets & may be added to your cart.
-
This listing covers 1961, 1962 & 1963 Skylark's and Special's stock with the stock V8 & 2bbl (for MY 1963 the type of carburetor does not matter) carburetor along with 1962 & 1963 Special's stock with a V6. Refer to listing 568813 for the 1961-62 4bbl set-up. Photo depicts the single exhaust system for 1962 Buick Specials with the stock 215ci V8 and 2bbl carburetor.- System contains Y pipe, rear exhaust pipe (our pattern pipe is 2 pcs vs the original 1 pc. long pipe), transverse muffler, tailpipe. Metal-to-metal connection at the manifolds, no gaskets required. Y pipe may be NORS.
- Original flanges were a formed flange which are NA. If the Y pipe for your system is not an NORS part, Waldron's Exhaust will use universal flat flanges in reproducing the Y pipe. If you have the original flanges and would like us to reuse them on your system, you are welcome to ship them to us in advance of building your system.
-
This listing covers model years 1930, 1931, 1932 & 1933 Cadillac's stock with dual exhaust and their respective stock V12 or V16. Photo depicts the stock dual exhaust for 1931-33 Cadillac Models 370A, 370B & 370C with the stock V12.- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes. Exhaust pipes originally used cast iron flanges. We do not have them available and no flanges will come with the system.
- MY 1930 exhaust pipe is stock 2¼" and reduces to 1¾" at the muffler outlets.
- MY's 1931-32 exhaust pipe is stock at 2½" and reduces to 1 7/8" at the muffler outlets.
-
This listing covers model years 1967, 1968, 1969, and 1970 Eldorado's with a stock dual exhaust. Photo depicts the system for 1970 Eldorado's- Dual exhaust system consists of LS/RS front, LS/RS rear exhaust pipes, dual in/single out transverse muffler, and LS exit tailpipe with resonator.
-
This listing covers model years 1949,1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Chevrolet Bel Air, Impala, Biscayne, Delray and Nomads with 6 cyl. Photos depicts the system for MY's 1953-54 Chevy's with the stock 6 cyl.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- For MY's 1965-68; you will need to report the desired tailpipe exit in the check out process.
-
This listing covers MY's 1965, 1966, and 1967 Chevy II and Nova's with a stock 283ci or 327ci V8 and stock dual exhaust w/2 mufflers. For some models this is a resonator delete option. Photo depicts the system for 1965-67 Nova's and Chevy II's with the stock V8 and tailpipes exiting out behind the rear wheels .- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipe.
- 1965-66 with 327 V8. 1966 with 283 V8. 1967 with 327 V8. Please specify early or late model year for 1967 Chevy ll.
- Select your desired tailpipe exit in the ordering process.
-
This listing covers model years 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Chevy II and Nova's with 4 or 6 cyl engines. Photo depicts the system for a 1970 Nova with the stock 6 cyl.- Single exhaust system consists front exhaust pipe, rear exhaust pipe, transverse muffler and tailpipe.
-
This listing covers model years 1964, 1965, 1966, and 1967 SS, Chevelle and Malibu's with a V8 and stock single exhaust. Photo depicts the single exhaust system for 1965-67 Chevelle and Malibu's with the stock V8- This single exhaust consists of a front and rear exhaust (makes up the 2 pc. Y pipe) pipes, muffler, and tailpipe.
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Chevelle, Malibu and El Camino's with a stock 6 cyl. Photo depicts the stock single exhaust for 1968 Chevy 4dr Chevelle's, 300's, and Malibu's with the stock 6cyl (2drs take a shorter exhaust pipe).- Single exhaust system consists of exhaust pipe, muffler and tailpipe.
-
This listing covers model years 1975, 1976, 1977, 1978, 1979, 1980, and 1981 Camaro's with the stock V8 single exhaust with 2 tailpipes. Photo depicts the system for MY's 1977-79 Camaro's stock with the 305ci or 350ci V8.- Complete cat-back exhaust system begins behind the catalytic converter and consists of the rear exhaust pipe, muffler, and LS/RS tailpipes. If parts forward of this cat-back system are needed, please contact us for price and availability.
-
This listing covers model years 1971, 1972, 1973, and 1974 Vega's with the stock 4 cyl. Photo depicts the system for 1974 Vega's. MY's 1971-73 require the same exhaust pipe but the system varies after that.- Single exhaust system consists of the front exhaust pipe, rear exhaust pipe, single in/single out transverse muffler, and tailpipe.
-
This listing covers model years 1954, 1955, and 1956 New Yorker, 300 and Windsor's stock with a V8 and dual exhaust. Photo depicts the stock dual exhaust for 1954 New Yorker's.- For 1954-55 model years the dual exhaust system consists of LS/RS front exhaust pipe, LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
- Model year 1956 consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
Waldron's Exhaust developed this unique dual exhaust system using a factory OEM exhaust system. Photo depicted is correct to the listing.- This system consists of LS/RS exhaust pipes with stainless steel flex wrap, LS/RS resonator pipes, LS/RS over-axle pipes with balance tube, LS/RS mufflers and LS/RS tailpipes.
- This system starts out at 2"OD on the exhaust pipes which reduce to 1¾"OD at the resonator inlets and then remains at 1¾"OD throughout the remaining of the system.
-
Listing covers MY's 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959 Desoto's stock with a V8 and single exhaust. Excludes 1953-54 Desoto convertibles which were stock with 2 mufflers. Photo depicts the stock single exhaust for 1954 Desoto Firedome's with the stock V8 except convertibles, SW's & 8 passenger cars.- For 1952-56 models & 1957 Firesweep this single exhaust system consists of a cross-over pipe, Y pipe, rear exhaust pipe, muffler, and tailpipe.
- For 1957 Firedome & Fireflite & all 1958-59 models this single exhaust system consists of Y pipe, rear exhaust pipe, muffler and tailpipe.
- Y pipe may be NORS.
-
This listing covers MY's 1965 and 1966 Dodge Darts stock with the 273ci V8 and 4 BBL carburetor. Due to our manufacture loosing our pattern for the special tip, our last shipment of this part was not up to our standards and this listing no longer includes the special resonator. If you would like to see what we can offer regarding this resonator, please refer to SKU Arvin1212. Photo is correct to the listing.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, over-axle pipe, and resonator eliminator pipe (integral resonator with rectangular polished stainless steel outlet has been eliminated).
- Waldron's Exhaust does not offer over-sizing on this system. Y pipe starts off the manifolds at 1&7/8"OD and increases to 2½"OD where the Y pipe comes together, rear exhaust pipe is 2½"OD and reduces to 2¼"going into the muffler and stays 2¼" through remainder of system.