- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS rear mufflers, and LS/RS tailpipes.
-
This listing covers model years 1957, 1958, and 1959 New Yorker, Saratoga, 300, and Windsor with the stock V8 and dual exhaust. Excludes convertibles which were stock with 2 mufflers and 2 resonators. Photo depicts the system for 1957-58 Chrysler 300's.
- Dual exhaust consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
Convert your 1957, 1958, or 1959 Chevy ½T, ¾T, or 1T with a small block 283ci V8 to dual's with Waldron's exclusive dual conversion kits that bolt onto your original manifolds that dump straight down with 3blt connection. Photo depicts the system for MY's 1957-59 Chevy ½T's with a long wheel base and the stock 283ci.
- Dual conversion kit consists of gaskets, clamps, LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS custom-built glasspacks, and LS/RS tailpipes. The 4 universal hangers are not included but can be added to your cart.
- System is 2" throughout.
-
This listing covers model years 1957 and 1958 full size Buick's with dual exhaust. Photo depicts the system for a 1958 Buick Roadmaster.
- This system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes and LS/RS resonators with short tailpipes. This system is a metal-to-metal connection at the manifold and no gaskets are required.
-
This listing covers 1957 Mercury Monterey, Montclair, and 1957 & 1958 Turnpike Cruiser stock with mufflers and resonators. Photo depicts the system for a 1957 Turnpike Cruiser (with the front tailpipes cut to reduce shipping costs).
- Dual exhaust consists of the LS/RS exhaust pipe, LS/RS muffler, LS/RS front tailpipe, and LS/RS rear tailpipe with resonator. From the factory these tailpipes were 1 pc. but must be made in 2 pc. in reproduction due to the length.
-
This alternative design dual exhaust system is a Waldron's Exhaust exclusive and eliminates the crossover pipes and Y pipes. For the true stock exhaust. refer to 588606. Photo depicts the alternative exhaust system for a 1957 Chevrolet convertible.
- This dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
-
Photo is correct to the listing. If you aren't concerned about staying true to the stock system and would like to eliminate the cross-over pipe & Y pipes or if you have late model motor mounts; refer to 588605.
- This listing is for the original stock design with the early model motor mount and consists of LS/RS crossover pipes, LS/RS Y pipes, LS/RS mufflers and LS/RS tailpipes.
- It has been brought to our attention that vehicles using the late model motor mounts will have fitment issues with the cross-over pipes and we suggest that you order the alternative design or be prepared to make modifications.
-
1957 Thunderbirds stock with the 292ci V8 did not come with resonators so for this model the listing is correct to the stock system. This is a resonator delete option for 1956 models (regardless of the engine) and for 1957 stock with the 312ci.
- System consists of the LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes.
-
This listing covers MY's 1956 with either the 292ci or the 312vi V8 and 1957 Ford Thunderbirds with the 312ci V8. The 292ci did not come stock with resonators. Refer to listing 518899 for a '57 T-bird with a 292ci or if you want to delete the resonator. Photos depicts the exhaust pipes and mufflers for 1956 and 1957 Thunderbirds, the front and rear tailpipes vary depending on engine and transmission.
- This dual exhaust consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front tailpipes with resonators, and LS/RS tailpipes.
-
Waldron's Exhaust developed this unique dual exhaust system using a factory OEM exhaust system. Photo depicted is correct to the listing.
- This system consists of LS/RS exhaust pipes with stainless steel flex wrap, LS/RS resonator pipes, LS/RS over-axle pipes with balance tube, LS/RS mufflers and LS/RS tailpipes.
- This system starts out at 2"OD on the exhaust pipes which reduce to 1¾"OD at the resonator inlets and then remains at 1¾"OD throughout the remaining of the system.
-
This listing covers model year 1956 Buick (only). Photos depicts the system for a 1956 Buick Special's & Century's
- The dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. This is a metal to metal connection and does not require any gaskets. It is also flanged through out, so you will only need clamps to use in conjunction with any universal hangers you may order.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, and 1979 Chevy C10, C20, and C30's stock with the V8 and single exhaust. Excludes 1966-69 K Series with 4WD. For MY's 1968-72; you will need to report whether your truck is stock with or without rear leaf springs. Photo depicts the system for MY's 1957-59 Chevy ½T's with the stock V8.
- System consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, and 1964 Commander, President, Golden Hawk, Silver Hawk, Lark, Hawk, and President Classic with the stock V8 and dual exhaust. Photo depicts the system for a 1962 Hawk hardtop stock with a dual exhaust.
- For MY's 1959-64 Lark convertibles and 1963-64 Station Wagon's this dual exhaust consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS front tailpipes, and LS/RS rear tailpipes.
- For all other models this dual exhaust consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- 1958 Sedans will need to report whether it is a "long wheel base sedan" or "except long wheel base sedan".
- 1963 & 1964 Larks will need to report which type of filter is stock; spin-on filter or cartridge filter.
- 1964 Lark Station Wagons will need to report whether your SW has a sliding roof or not.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, 1961, and 1962 Metropolitan's with a 4cyl engine. Photo shown is correct to this listing.
- The system consists of the exhaust pipe, muffler and tailpipe. The system does NOT come with the "clam shaped" clamp needed at the manifold. If needed, give American Parts Depot a call.
-
This listing covers model years 1955, 1956, 1957, 1958, 1959, 1960, 1961, and 1962 Corvettes. Photo depicts the system for 1955 & 1956 Corvettes.
- MY's 1955-1960 dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS front tailpipes and LS/RS rear tailpipes.
- MY's 1961-62 dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS tailpipes.
- MY's 1955-56 require a 2 blt. flange with flat gaskets.
- MY's 1957-62 require a 3 blt. flange with donut gaskets.