- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- We received many inquiries regarding this system fitting 1963-64 New Yorker's. It will NOT due to the fact that the engine on the New Yorker's sits 1" higher to the manifold.
-
This listing covers model years 1960 & 1961 (without Ram Induction), 1962, 1963, and 1964 300's with dual exhaust and mufflers only (no resonators). If your 1960-61 Chrysler 300 was stock with Ram Induction refer to SKU 5987697. If your 1962-64 Chrysler 300 is stock with the Cross Ram engine, refer to listing 598702. Photo depicts the system for 1963-64 Chrysler 300's. -
This listing covers model years 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, and 1975 New Yorker, Newport, Windsor and 300's with a V8 and stock with a single exhaust with both muffler and resonator. Excludes 1961 Newport & Windsor, 1962 Newport & 300's, and 1971 w/360ci, 1972, 1973 w/400ci Newport's which were stock with 1 muffler. Photo depicts the system for 1974 New Yorkers and Newport's stock with the 440ci.- Single exhaust consists of Y pipe, rear exhaust pipe, front muffler, connector pipe, and rear muffler with tailpipe.
-
This listing covers model years 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, and 1975 New Yorker, Newport, Windsor, and 300's with stock V8 and single exhaust with 1 muffler (no resonator). This is a stock system to all 1960 models. For MY 1961-64 New Yorkers & from 1965 & up all models were stock with a resonator. Listing is a resonator eliminator option. MY 1975; this listing is for models that were not stock with a catalytic converter and eliminates the resonator. Photos depicts the system for 1965 Chrysler 300's or Newport's with the stock 383ci single exhaust with the stock resonator eliminated (except SW).- Single exhaust system consists of Y pipe, rear exhaust pipe, muffler and tailpipe.
-
Listing covers MY's 1960 and 1961 Chryslers stock with the Ram Induction setup. Photo is correct to the listing.- Ram Induction dual exhaust system consists of LS/RS front exhaust pipes (AKA preheater tubes), LS/RS center exhaust pipes, cross-over (these 5 pipes make up an "H" pipe), LS/RS rear exhaust pipes, LS/RS mufflers, and LS/RS tailpipes along with the 1&1/8" clamps needed at the preheater tubes.
- The tailpipes are short on the 300; they end in front of the bumper and they are tucked up tightly under the trunk pan. You can’t see the tailpipe tips from the side of the vehicle.
- The tailpipe hangers attach at the radius of the turndown, not on a straight section of pipe. This is a Waldron's exclusive design.
-
This listing covers model years 1957, 1958, 1959, 1960, 1961, and 1962 New Yorker, 300, and Windsor's V8 dual exhaust stock with 2 mufflers and 2 resonators. In 1962 the New Yorker Station Wagons are the only body style given a stock dual exhaust, all other New Yorker body styles were stock with a single exhaust. Excludes 300's with the Ram Induction set-up. Photo depicts the system for a 1960 New Yorker.- Dual exhaust system consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS front mufflers, LS/RS connector pipes, LS/RS rear mufflers, and LS/RS tailpipes.
-
This listing covers model years 1957, 1958, and 1959 New Yorker, Saratoga, 300, and Windsor with the stock V8 and dual exhaust. Excludes convertibles which were stock with 2 mufflers and 2 resonators. Photo depicts the system for 1957-58 Chrysler 300's.- Dual exhaust consists of LS/RS front exhaust pipes, LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
This listing covers model years 1954, 1955, and 1956 New Yorker, 300 and Windsor's stock with a V8 and dual exhaust. Photo depicts the stock dual exhaust for 1954 New Yorker's.- For 1954-55 model years the dual exhaust system consists of LS/RS front exhaust pipe, LS/RS rear exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
- Model year 1956 consists of LS/RS exhaust pipes, LS/RS mufflers and LS/RS tailpipes.
-
This listing covers model years 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, and 1959 New Yorker, Saratoga, Windsor, Crown Imperial, and Imperial's with the stock V8 and single exhaust. Photo depicts the stock single exhaust system for a 1955 Windsor with the stock V8- For MY's 1951-54 this single exhaust consists of Y pipe, crossover pipe, rear exhaust pipe, muffler and tailpipe.
- For MY's 1955-58 the system consists of Y pipe, crossover pipe, muffler and tailpipe. 1959 consists of Y pipe, rear exhaust pipe, muffler and tailpipe.
- Some application may have an NORS Y pipe.
-
This listing covers model years 1951, 1952, 1953, and 1954 Chrysler Windsor with the stock 6 cyl. Photo depicts the 6 cyl single exhaust for 1953-54 Chrysler Windsor's- Single exhaust system consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers model years 1949,1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Chevrolet Bel Air, Impala, Biscayne, Delray and Nomads with 6 cyl. Photos depicts the system for MY's 1953-54 Chevy's with the stock 6 cyl.- Single exhaust system consists of the exhaust pipe, muffler and tailpipe.
- For MY's 1965-68; you will need to report the desired tailpipe exit in the check out process.
-
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk. -
BL = Body Length OA = Over-all Length ID = Internal Dimension OD = Outside Dimension Refer to specs shown in photo. Muffler being sold "as is" and is non-returnable, non-refundable. This part will generally ship within 1 wk.