- Dual exhaust system consists of the H pipe, LS/RS mufflers, LS/RS connector pipes, LS/RS resonators, and LS/RS tailpipes. If chrome tips are desired, please check out our available tips and add a set to your cart.
-
Photo depicted is correct to the listing. -
This listing covers model years 1967, 1968, and 1969 Signet, Valiant, and Barracuda's with the stock 383ci or 340ci V8 and dual exhaust. Photo depicts the stock dual exhaust system for 1968 Barracuda's, Valiant's & Signet's with the stock 340ci or 383ci.- Dual exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. The chrome tip for model years 1968 & 1969 are not part of this system. Please, check out our chrome tips and add to your cart if desired.
-
This listing covers model years 1965, 1966, and 1967 Barracuda's with the stock 273ci and 4bbl carburetor. Due to our manufacture loosing our pattern for the special tip, our last shipment of this part was not up to our standards and this listing no longer includes the special resonator. If you would like to see what we can offer regarding this resonator, please refer to SKU Arvin1212. Photo depicts the stock single exhaust for 1965-66 Barracuda's with the stock 273ci & 4bbl.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, over-axle pipe, and resonator eliminator pipe (integral resonator with rectangular polished stainless steel outlet has been eliminated).
- Waldron's Exhaust does not offer over-sizing on this system. Y pipe starts off the manifolds at 1&7/8"OD and increases to 2½"OD where the Y pipe comes together, rear exhaust pipe is 2½"OD and reduces to 2¼"going into the muffler and stays 2¼" through remainder of system.
-
This listing covers model years 1964, 1965, 1966, 1967, 1968, 1969, 1970, and 1971 Signet, Valiant, and Barracuda's with the stock V8 273ci or 318ci and single exhaust. Photo depicts the stock single exhaust for 1964-66 Plymouth Mid Size models with the stock 273ci or 318ci with a 2bbl carburetor.- Single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
- MY's 1964-69 do NOT require gaskets at the manifold.
- MY's 1970-71 DO require gaskets at the manifold.
-
This listing covers model years 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, and 1976 Signet, Barracuda, Duster, Scamp, and Valiant's with the stock 6 cyl engine and single exhaust with 1 muffler. Photo depicts the system for 1970 and 1971 Barracuda's with the stock 6 cyl. This system start off on the driver side and crossover to the passenger side. The exhaust pipe was built in 3 pcs. to reduce the cost of shipping.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
- This single exhaust system consists of the Y pipe, rear exhaust pipe, muffler, resonator w/long inlet pipe, and tailpipe.
-
This listing is the stock set up for these models without converters and with the stock 440ci, 400ci, and 360ci. For the resonator eliminator option, refer to listing 438528.
- This dual exhaust consists of LS front and rear exhaust pipe, RS exhaust pipe, LS/RS mufflers, LS/RS over-axle pipes, LS/RS resonators, and short tailpipes.
-
This listing is a stock set up for 1975 and 1976 Gran Fury's with the stock 400ci or 460ci that were stock from the factory without catalytic converters. For 1975 and 1976 Road Runner's or Fury's (stock without catalytic converter but stock with 4 mufflers) this is a resonator eliminator option. For the stock set refer to listing 438529. Photo depicts the stock dual exhaust for 1975 Plymouth Fury or Roadrunner's with the stock 400ci with stock resonators eliminated.- This dual exhaust consists of the LS front exhaust pipe, LS rear exhaust pipe, RS exhaust pipe, LS/RS mufflers, LS/RS connector pipes and LS/RS resonator eliminator pipes.
-
- Dual cat-back exhaust consists of LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes. If pipes forward of converters and/or converters are needed please contact us for pricing and availability.
-
This listing covers model years 1975, 1976, 1977, and 1978 Road Runner, Fury, and Gran Fury's with the stock V8 and single exhaust stock with muffler and resonator. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- Single cat-back exhaust consists of the rear exhaust pipe, muffler, over-axle pipe, and resonator with tailpipe.
-
This listing covers model years 1975 with the stock 6 cyl engine, 1976, 1977, and 1978 Gran Fury, Fury, and Road Runners (including station wagon) stock with the 6 cyl or V8. 1975's stock with the V8, this is a resonator eliminator option. For the stock set up refer to listing 438526. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- For all but 1975 w/V8 this single cat back will consist of the rear exhaust pipe, muffler, and tailpipe.
- For 1975 w/V8 this single cat back will consist of the rear exhaust pipe, muffler, connector pipe, and resonator eliminator pipe.
- If pipes forward of converter and/or converter are needed, please contact us for pricing and availability.
-
This listing is for 1975 and 1976 Gran Fury and Fury's that were stock without a catalytic converter. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.- The single exhaust for a 1975/1976 Gran Fury consists of the Y pipe, rear exhaust pipe, muffler, over-axle pipe, and resonator with tailpipe.
- The single exhaust for a 1975/1976 Fury consists of the Y pipe, muffler, over-axle pipe, and resonator with tailpipe.