- 1966-Early 1971 with the gas tank sitting forward of the rear axle, this single exhaust system consists of a Y pipe, rear exhaust pipe, transverse muffler and tailpipe exiting on the PS.
- Later 1971 models with the gas tank sitting aft of the rear axle; this single exhaust pipe consists of a cross-over pipe, Y pipe, inline muffler and tailpipe exiting on the DS.
- You will need to report which system is needed in the check out process.
-
This listing covers model years 1966, 1967, 1968, 1969, 1970, and 1971 CJ-5, CJ-5A, and D-J5 with the stock Dauntless V6 225ci. The photo depicts the exhaust system for 1966-71 CJ5, CJ5A and DJ5 with gas tank forward of the rear axle. -
This listing covers MY's 1966, 1967, 1968, 1969, 1970, and 1971 Jeep CJ-6, CJ-6A, & DJ6 with the stock V6 225ci engine. Photo depicts the system for 1966-71 CJ-5, CJ-5A, & DJ-5's with the stock V6 225ci. The rear exhaust pipe is longer on the CJ-6's.
- Single exhaust consists of the Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
This listing model years 1966, 1967, 1968, 1969, 1970, 1971, and 1972 models J-262, J-264, J-362, J-364 Gladiator's, J-162, J-164 Station Wagon & Panel Delivery with the stock V8 304ci, 350ci, or 360ci. Photo depicts the system for a 1970 Jeep Wagoneer.- Single exhaust system consists of LS crossover pipe, Y pipe, muffler, and tailpipe. Y pipe may be NORS.
-
This listing covers MY's 1966, 1967, 1968, & 1969 Pontiac Custom, GTO, Lemans, & Tempest with Ram Air or High Output, 1970 models with Ram Air, and 1971-72 models with High Output. If your MY 1966, 1967, or 1969 was stock with 4 mufflers, refer to listing 453477. For systems w/o RA or HO, refer to listing 453210. Photo depicts the stock dual exhaust system for 1967 Pontiac Lemans, Tempest, and Custom with RA or HO manifolds on the stock 400ci V8 & standard transmission (this is a resonator eliminator system for 1967 GTO's with RA or HO & STD trans).- This dual exhaust system consists of the LS/RS exhaust pipes, LS/RS mufflers, and LS/RS tailpipes.
- This system starts out at 2¼"OD on the exhaust pipes which reduce to 2"OD at the muffler inlets and then increases to 2¼" OD at the tailpipes.
- For MY's 1970-72, this system does not include the chrome tips but will be designed to fit up to the stock tip design.
- If the cast iron flanges are needed, add them to your cart for an additional $45.00.
- Metal-to-metal connection at the manifolds. Gaskets are not required.
-
This listing covers model years 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Buick Riviera with V8 and allows you to delete the stock resonators. Photo depicts the system for a 1966 Buick Riviera with the stock V8 (with rear exhaust pipes cut to reduce shipping). MY's 1967-70 Riviera's take different exhaust pipes at 2¼"OD with flat spots but all other parts shown in the photo are correct.- 1966-70 Riviera exhaust system consists of LS/RS exhaust pipes, LS/RS mufflers, LS/RS front connector pipes, LS/RS rear connector pipes, LS/RS resonators w/tailpipes.
- 1971-74 Riviera exhaust system consist of LS/RS exhaust pipes, LS/RS mufflers, LS/RS connector pipes, LS/RS resonators w/tailpipes.
-
This listing covers model years 1966, 1967, 1968, 169, 1970, 1971, 1972, 1973, and 1974 Ford Bronco's with the stock 6 cyl.- Single exhaust consists of the exhaust pipe, muffler, and tailpipe.
-
This listing covers MY's 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973 and 1974 Mercury Monterey, Montclair, Parklane, Commuter, Colony Park, Station Wagon, Marquis and Marauder's with the stock 390ci, 410ci, 428ci ,429ci, 351ci, 400ci & 460ci V8 and single exhaust. Photo depicts the single exhaust for a 1972 Mercury full size with the stock 429ci or 460ci V8- Single exhaust consists of the Y pipe, muffler and tail pipe. Some systems (depending on engine and/or body style) will have a front and rear tail pipe. MY 1967 with a 410ci or 428ci & MY 1973 with a 429ci or 460ci were stock with a resonator. If you would like to include the resonator, please give us a call at 800-503-9428.
-
This listing covers model years 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, and 1975 International trucks with the stock V8. Excludes 1966-68 C1100-1300, D1100-130, & C110-130 with 4WD. Photo depicts the system for MY's 1966-69 International trucks with the stock 304ci and 2WD (the tailpipe for this system was built in 2 sections to reduce the cost of shipping).- This single exhaust system consists of the crossover pipe, Y pipe, rear exhaust pipe, muffler, and tailpipe.
-
AFTERMARKET NOS PARTS FROM WALDRON'S EXHAUST; These are components that we have acquired over the years. The parts were manufactured by Walker, Maremont, International Parts Corp (IPC), Arvin or other exhaust component manufacturers as service replacement parts for OEM components. They will be cleaned to remove any surface corrosion and coated with a corrosion-resistant coating unless you ask us to leave them untreated. This pipe fits 1967 Buick Skylark Sport Wagon V8 with Super Turbine 400 trans. This part will generally ship within 1 wk. -
Photo depicted is correct to the listing.- This dual exhaust in unique and consists of the H pipe, LS/RS rear exhaust pipe, LS/RS mufflers, LS/RS tailpipes, and transverse resonator.
-
Photo depicted is correct to the listing.- This single exhaust consists of the front exhaust pipe, rear exhaust pipe with resonator, transverse muffler, and tailpipe. It is 2"OD throughout.
-
This listing is for folks who want to keep their 1967 Comet, stock with a 390ci or 427ci V8, true to stock with the resonator. For a resonator eliminator option, refer to listing 453470. Photo shown is generic and is posted so that you might see the quality of our craftsmanship and the type of bending.
- Dual exhaust consists of the H pipe, LS/RS rear exhaust pipes, LS/RS mufflers, LS/RS tailpipes, and transverse muffler (sits between tailpipes).